Export limit exceeded: 417581 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417581 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417581 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93058 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/ | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-92506 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix requested device removal race scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while notifying listeners but continues to retain the per-protocol list head. When two SCMI drivers for the same protocol unregister concurrently, one thread can remove the final request and free the list head while the other is running its notifier. The latter then dereferences the freed list head after reacquiring the mutex and can free it a second time. Complete the list and IDR updates, including freeing an empty list head, before dropping the mutex. Keep the blocking notifier outside the critical section and retain only the detached request across the callback. | ||||
| CVE-2026-92503 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find() Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising concurrent xattr workloads (using the ea_inode mount/format option). The deadlock occurs between the running transaction and the eviction thread: - Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce) and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve the corresponding EA inode. Since the EA inode is currently being evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for eviction to complete. - Task 2 (eviction thread): Currently evicting the same EA inode in ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which blocks waiting for Task 1 to release the reference to the mbcache_entry. To break this deadlock, implement a new ext4_iget() configuration flag named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the inode via VFS's find_inode_nowait() API. If the inode is currently being evicted (marked with I_FREEING or I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS inode cache (cache miss), simply skip it (returning -ENOENT) rather than waiting for eviction/creation to complete, breaking the ABBA cycle. Since we return -ENOENT immediately on a cache miss, we never attempt to allocate a new inode or call iget_locked(), completely eliminating any TOCTOU race window. If the returned inode is I_NEW, wait for its initialization to clear via wait_on_new_inode(). If initialization fails and the inode is unhashed during wait_on_new_inode() waking up (e.g., due to an I/O read error in another thread), safely drop the reference and return -ENOENT. This unhashed check is executed unconditionally on all cache-hit pathways to properly handle concurrent initialization failures. Finally, standard validation checks (including is_bad_inode, EXT4_EA_INODE_FL, file_acl, and xattr flags) are executed as normal inside check_igot_inode() to fully guarantee VFS-layer safety. In ext4_xattr_inode_cache_find(), invoke ext4_iget() with the new EXT4_IGET_NOWAIT flag to perform the non-blocking cache search. | ||||
| CVE-2026-92490 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unrequest devices if driver registration fails scmi_driver_register() requests protocol devices before registering the driver. If driver_register() fails, those requests remain in the global IDR and retain pointers to the module's ID table. Once the failed module load releases that storage, later request matching or SCMI device creation can dereference the stale pointers. Unrequest the complete protocol table before returning the registration failure. At this point table registration succeeded, so every entry is owned by the current registration attempt. | ||||
| CVE-2026-92488 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed, leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and permanently disables the command queue, so no retry can succeed; the RDMA core keeps the object after a failed destructor and forced uverbs cleanup then nulls the pointers, making the resources unreachable. Warn on failure but release every software-owned resource and return success, since during terminal destruction the hardware command result is only diagnostic. | ||||
| CVE-2026-92485 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock. | ||||
| CVE-2026-92482 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated with device-managed memory but registered with the non-managed gpiochip_add_data(). This was harmless while the drivers were built-in, but once they can be built as modules and unbound/rmmod'd, devm frees the gpio_chip's memory while it is still registered, causing a use-after-free. Register it with devm_gpiochip_add_data() so it shares the same device-managed lifecycle, which also lets the manual gpiochip_remove() error paths go away. | ||||
| CVE-2026-92480 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread. | ||||
| CVE-2026-90433 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq() and dereference already-freed memory (e.g. hw->base). Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90421 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe. | ||||
| CVE-2026-90418 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(), which copies dirty DAT file folios/pages to its shadow page cache. The BUG occurs when a retrieved dirty folio/page unexpectedly loses its 'dirty' status. This issue arises because, since the commit referenced below, the 'dirty' flag of a folio/page can be cleared asynchronously after the filesystem detects metadata corruption and transitions to read-only mode. Resolve the issue by returning an -EROFS error if the filesystem has transitioned to read-only mode. Also change the behavior to issue a kernel warning only once instead of triggering a kernel BUG when this unexpected 'dirty' state is detected while the filesystem is not in read-only mode. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90410 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: davinci: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_threaded_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded davinci_spi devdata, which is the IRQ handler's dev_id. The devm_request_threaded_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach davinci_spi_irq() and dereference already-freed memory. Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. The clock is acquired with devm_clk_get_enabled(), which is registered after the IRQ and thus released before it by the devres LIFO order. Drain the interrupt explicitly with devm_free_irq() before disabling the controller so that a late interrupt cannot access the registers of a clock-gated controller. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90392 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields. | ||||
| CVE-2026-90385 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: create serial pool adding rdev to array with serialize_policy=1 The following bug has been observed with kernel 7.1.3 after adding a new rdev to an existing RAID1 array with serialize_policy enabled: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 19639 Comm: ext4lazyinit Not tainted 7.1.3-1-default RIP: _raw_spin_lock_irqsave+0x27/0x50 CR2: 0000000000004960 Call Trace: wait_for_serialization+0xb9/0x260 [raid1] raid1_make_request+0x762/0xaff [raid1] md_handle_request+0x1c9/0x2e0 [md_mod] The raid1.c code calls wait_for_serialization() if the MD_SERIALIZE_POLICY is set, and wait_for_serialization assumes that rdev->serial is initialized. Normally this will be the case for arrays that have the serialize_policy sysfs attribute set to 1. But when a new rdev is added to an existing array in bind_rdev_to_array(), the condition at mddev_create_serial_pool() causes creation of rdev->serial to be skipped. Fix it. | ||||
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||