Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43353 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in DMA ring dequeue The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself. | ||||
| CVE-2026-43352 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue The logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action. Fix the abort handling by checking whether the ring is running before issuing an abort, re-initializing the completion when needed, ensuring that RING_CTRL_ENABLE remains asserted during abort, and treating an already stopped ring as a successful condition. | ||||
| CVE-2026-43344 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. | ||||
| CVE-2026-43338 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reserve enough transaction items for qgroup ioctls Currently our qgroup ioctls don't reserve any space, they just do a transaction join, which does not reserve any space, neither for the quota tree updates nor for the delayed refs generated when updating the quota tree. The quota root uses the global block reserve, which is fine most of the time since we don't expect a lot of updates to the quota root, or to be too close to -ENOSPC such that other critical metadata updates need to resort to the global reserve. However this is not optimal, as not reserving proper space may result in a transaction abort due to not reserving space for delayed refs and then abusing the use of the global block reserve. For example, the following reproducer (which is unlikely to model any real world use case, but just to illustrate the problem), triggers such a transaction abort due to -ENOSPC when running delayed refs: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 umount $DEV &> /dev/null # Limit device to 1G so that it's much faster to reproduce the issue. mkfs.btrfs -f -b 1G $DEV mount -o commit=600 $DEV $MNT fallocate -l 800M $MNT/filler btrfs quota enable $MNT for ((i = 1; i <= 400000; i++)); do btrfs qgroup create 1/$i $MNT done umount $MNT When running this, we can see in dmesg/syslog that a transaction abort happened: [436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28 [436.493] ------------[ cut here ]------------ [436.494] BTRFS: Transaction aborted (error -28) [436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372 [436.497] Modules linked in: btrfs loop (...) [436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [436.510] Tainted: [W]=WARN [436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs] [436.514] Code: 0f 82 ea (...) [436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292 [436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001 [436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80 [436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867 [436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400 [436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000 [436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000 [436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0 [436.530] Call Trace: [436.530] <TASK> [436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs] [436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs] [436.532] sync_filesystem+0x7a/0x90 [436.533] generic_shutdown_super+0x28/0x180 [436.533] kill_anon_super+0x12/0x40 [436.534] btrfs_kill_super+0x12/0x20 [btrfs] [436.534] deactivate_locked_super+0x2f/0xb0 [436.534] cleanup_mnt+0xea/0x180 [436.535] task_work_run+0x58/0xa0 [436.535] exit_to_user_mode_loop+0xed/0x480 [436.536] ? __x64_sys_umount+0x68/0x80 [436.536] do_syscall_64+0x2a5/0xf20 [436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [436.537] RIP: 0033:0x7fe5906b6217 [436.538] Code: 0d 00 f7 (...) [436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217 [436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100 [436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff [436.544] R10: 0000000000000103 R11: ---truncated--- | ||||
| CVE-2026-43310 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and g2 VPU cannot decode simultaneously; otherwise, it will cause below bus error and produce corrupted pictures, even potentially lead to system hang. [ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out. [ 110.583517] hantro-vpu 38310000.video-codec: bus error detected. Therefore, it is necessary to ensure that g1 and g2 operate alternately. This allows for successful multi-instance decoding of H.264 and HEVC. To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the v4l2_m2m_dev can handle the scheduling. | ||||
| CVE-2026-43308 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref() There is no need to BUG(), we can just return an error and log an error message. | ||||
| CVE-2026-43299 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure() [BUG] There is a bug report that when btrfs hits ENOSPC error in a critical path, btrfs flips RO (this part is expected, although the ENOSPC bug still needs to be addressed). The problem is after the RO flip, if there is a read repair pending, we can hit the ASSERT() inside btrfs_repair_io_failure() like the following: BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -28) WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844 Modules linked in: kvm_intel kvm irqbypass [...] ---[ end trace 0000000000000000 ]--- BTRFS info (device vdc state EA): 2 enospc errors during balance BTRFS info (device vdc state EA): balance: ended with status: -30 BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6 BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0 [...] assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 ------------[ cut here ]------------ assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 kernel BUG at fs/btrfs/bio.c:938! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full) Tainted: [W]=WARN, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: btrfs-endio simple_end_io_work RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120 RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246 RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988 R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310 R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000 FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 ------------[ cut here ]------------ [CAUSE] The cause of -ENOSPC error during the test case btrfs/124 is still unknown, although it's known that we still have cases where metadata can be over-committed but can not be fulfilled correctly, thus if we hit such ENOSPC error inside a critical path, we have no choice but abort the current transaction. This will mark the fs read-only. The problem is inside the btrfs_repair_io_failure() path that we require the fs not to be mount read-only. This is normally fine, but if we are doing a read-repair meanwhile the fs flips RO due to a critical error, we can enter btrfs_repair_io_failure() with super block set to read-only, thus triggering the above crash. [FIX] Just replace the ASSERT() with a proper return if the fs is already read-only. | ||||
| CVE-2026-43271 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md-cluster: fix NULL pointer dereference in process_metadata_update The function process_metadata_update() blindly dereferences the 'thread' pointer (acquired via rcu_dereference_protected) within the wait_event() macro. While the code comment states "daemon thread must exist", there is a valid race condition window during the MD array startup sequence (md_run): 1. bitmap_load() is called, which invokes md_cluster_ops->join(). 2. join() starts the "cluster_recv" thread (recv_daemon). 3. At this point, recv_daemon is active and processing messages. 4. However, mddev->thread (the main MD thread) is not initialized until later in md_run(). If a METADATA_UPDATED message is received from a remote node during this specific window, process_metadata_update() will be called while mddev->thread is still NULL, leading to a kernel panic. To fix this, we must validate the 'thread' pointer. If it is NULL, we release the held lock (no_new_dev_lockres) and return early, safely ignoring the update request as the array is not yet fully ready to process it. | ||||
| CVE-2026-43258 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: alpha: fix user-space corruption during memory compaction Alpha systems can suffer sporadic user-space crashes and heap corruption when memory compaction is enabled. Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned tcache chunk"), and compiler internal errors. The failures disappear when compaction is disabled or when using global TLB invalidation. The root cause is insufficient TLB shootdown during page migration. Alpha relies on ASN-based MM context rollover for instruction cache coherency, but this alone is not sufficient to prevent stale data or instruction translations from surviving migration. Fix this by introducing a migration-specific helper that combines: - MM context invalidation (ASN rollover), - immediate per-CPU TLB invalidation (TBI), - synchronous cross-CPU shootdown when required. The helper is used only by migration/compaction paths to avoid changing global TLB semantics. Additionally, update flush_tlb_other(), pte_clear(), to use READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering. This fixes observed crashes on both UP and SMP Alpha systems. | ||||
| CVE-2026-43253 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled. | ||||
| CVE-2026-43250 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted). | ||||
| CVE-2026-116593 | 1 Apache | 1 Kafka | 2026-10-30 | N/A |
| Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations. Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime. An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker. Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue. | ||||
| CVE-2026-43249 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/xen: protect xen_9pfs_front_free against concurrent calls The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none) [ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150 [ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42 [ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246 [ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000 [ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000 [ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000 [ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68 [ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040 [ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000 [ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660 [ 27.052418] Call Trace: [ 27.052420] <TASK> [ 27.052422] xen_9pfs_front_changed+0x5d5/0x720 [ 27.052426] ? xenbus_otherend_changed+0x72/0x140 [ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10 [ 27.052434] xenwatch_thread+0x94/0x1c0 [ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 27.052442] kthread+0xf8/0x240 [ 27.052445] ? __pfx_kthread+0x10/0x10 [ 27.052449] ? __pfx_kthread+0x10/0x10 [ 27.052452] ret_from_fork+0x16b/0x1a0 [ 27.052456] ? __pfx_kthread+0x10/0x10 [ 27.052459] ret_from_fork_asm+0x1a/0x30 [ 27.052463] </TASK> [ 27.052465] Modules linked in: [ 27.052471] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-43248 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: move vdpa group bound check to vhost_vdpa Remove duplication by consolidating these here. This reduces the posibility of a parent driver missing them. While we're at it, fix a bug in vdpa_sim where a valid ASID can be assigned to a group equal to ngroups, causing an out of bound write. | ||||
| CVE-2026-43244 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa | ||||
| CVE-2026-43239 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: prevent races in ->query_interfaces() It was possible for two query interface works to be concurrently trying to update the interfaces. Prevent this by checking and updating iface_last_update under iface_lock. | ||||
| CVE-2026-43234 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1 and also found that the same issue was fixed in the bond driver in commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when unregistering slave"). Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") and commit 303a8487a657 ("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. | ||||
| CVE-2026-43215 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix locking usage for tcon fields We used to use the cifs_tcp_ses_lock to protect a lot of objects that are not just the server, ses or tcon lists. We later introduced srv_lock, ses_lock and tc_lock to protect fields within the corresponding structs. This was done to provide a more granular protection and avoid unnecessary serialization. There were still a couple of uses of cifs_tcp_ses_lock to provide tcon fields. In this patch, I've replaced them with tc_lock. | ||||
| CVE-2026-43213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate sequence number of TX release report Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: <IRQ> rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 </IRQ> <TASK> rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> To prevent crash, validate rpp_info.seq before using. | ||||
| CVE-2026-43204 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams. | ||||