Export limit exceeded: 45530 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45530 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63970 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. | ||||
| CVE-2026-63914 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier. | ||||
| CVE-2026-63875 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | | ||||
| CVE-2026-63863 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm() There is a unbalanced lock/unlock to gpusvm notifier lock: [ 931.045868] ===================================== [ 931.046509] WARNING: bad unlock balance detected! [ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U [ 931.048150] ------------------------------------- [ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at: [ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper] [ 931.050802] but there are no more locks to release! [ 931.051463] The drm_gpusvm_notifier_unlock() sits under err_free label and the first jump to err_free is just before calling the drm_gpusvm_notifier_lock() causing unbalanced unlock. | ||||
| CVE-2026-109750 | 1 Mozilla | 1 Firefox | 2026-10-19 | 9.6 Critical |
| Site isolation issue in the DOM: Web Authentication component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. | ||||
| CVE-2026-112046 | 1 Ow2 | 1 Asm | 2026-10-19 | 5.5 Medium |
| OW2 ASM 9.11 before 9.11.1 contains an infinite loop vulnerability in Label.resolve() caused by 16-bit forward-reference offsets truncating when rewritten methods exceed 64 KB. Attackers can supply crafted class files whose transformed code grows past 65535 bytes, hanging ClassReader.accept() and denying service to build tools, instrumenters, agents, or analyzers. | ||||
| CVE-2026-111938 | 1 Frappe | 2 Crm, Frappe Crm | 2026-10-19 | 4.3 Medium |
| Frappe CRM before 1.74.0 contains a missing authorization vulnerability that allows authenticated Sales Users to modify other users' call logs by supplying arbitrary call_sid values. Attackers can call the add_note_to_call_log and add_task_to_call_log endpoints to attach attacker-written notes and tasks that appear on victims' call logs, leads, and deals. | ||||
| CVE-2026-110674 | 1 Rurban | 1 Cpanel::json::xs | 2026-10-19 | N/A |
| Cpanel::JSON::XS versions from 4.33 before 4.80 for Perl miss duplicate non-ASCII bare keys, allowing type confusion under dupkeys_as_arrayref in decode_hv. With allow_barekey, which relaxed enables, a bare key containing a non-ASCII byte is stored as UTF-8 but looked up as raw bytes, so a repeated key escapes the duplicate-key check and replaces the earlier value. From 4.41, under dupkeys_as_arrayref, a bare repeat replaces the array that collects a key's values with a plain value, and the next quoted repeat pushes onto that value as if it were an array. A JSON integer there is dereferenced as a pointer. Untrusted JSON decoded with relaxed and dupkeys_as_arrayref can crash the process or dereference an address chosen by a JSON number. | ||||
| CVE-2026-67218 | 3 Broadcom, Rabbitmq, Redhat | 3 Rabbitmq Server, Rabbitmq-server, Hummingbird | 2026-10-19 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-66075 | 3 Broadcom, Rabbitmq, Redhat | 3 Rabbitmq Server, Rabbitmq-server, Hummingbird | 2026-10-19 | 5.4 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. | ||||
| CVE-2026-66076 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-10-19 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, is_authorized/2 calls rabbit_mgmt_util:is_authorized/2, which checks only the management tag, instead of is_authorized_vhost/2. The /api/queues/quorum/:vhost/:queue/status handler reads the vhost from the path without checking that the user can access it. Any management-tagged user can therefore read Raft status, including leader, members, term, and commit index, for quorum queues in inaccessible vhosts, exposing cross-tenant queue names and cluster topology. The management plugin must be enabled and the attacker must have a management tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-63833 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: reject direct userspace writes to reserved $LX* xattrs NTFS3 uses $LXUID, $LXGID, $LXMOD and $LXDEV as internal WSL permission metadata and reloads them into i_uid, i_gid and i_mode from ntfs_get_wsl_perm(). Because the empty-prefix xattr handler also lets file owners call setxattr() on these names directly, an unprivileged writer on a writable ntfs3 mount can plant root ownership and S_ISUID on their own file and gain euid 0 after inode reload. Reject direct userspace writes to the reserved $LX* names. Internal ntfs3 metadata updates are unchanged because ntfs_save_wsl_perm() writes them via ntfs_set_ea() directly. [almaz.alexandrovich@paragon-software.com: added an additional check for non privileged users] | ||||
| CVE-2026-63831 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis. | ||||
| CVE-2026-63829 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. | ||||
| CVE-2026-63823 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] | ||||
| CVE-2026-63808 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. | ||||
| CVE-2026-63802 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF in __blkcg_rstat_flush() When multiple blkgs in the same blkcg are released concurrently, a use-after-free can occur. The race happens when one blkg's __blkcg_rstat_flush() removes another blkg's iostat entries via llist_del_all(). The second blkg sees an empty list and proceeds to free itself while the first is still iterating over its entries. Move the flush from __blkg_release() (RCU callback) to blkg_release() (before call_rcu). This ensures the RCU grace period waits for any concurrent flush's rcu_read_lock() section to complete before freeing. | ||||
| CVE-2026-53399 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). | ||||
| CVE-2026-53398 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo(). | ||||
| CVE-2026-53374 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: zero-initialize GART table on allocation GART TLB is flushed after unmapping but not after mapping. Since amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a single PTE is written the TLB may speculatively load other uninitialized entries from the same cacheline. Those garbage entries can appear valid, and a subsequent write to another PTE in the same cacheline may cause the GPU to use a stale garbage PTE from the TLB. Fix this by calling memset_io() to zero-initialize the GART table with gart_pte_flags immediately after allocation. Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work since SDMA needs GART to be initialized to work. (cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) | ||||