Export limit exceeded: 417182 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417182 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97619 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: end write accounting from ->ki_complete Commit b000145e9907 moved both the fsnotify calls and the write accounting out of the kiocb completion handler and into the io_req_rw_complete() task_work. However, only the fsnotify part actually needed to move as it may sleep. Ending the write accounting is just a percpu_up_read() on the superblock writers sem. Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE protection depend on the ring owner getting to running task_work. But the task may be blocked in freeze_super(), causing it to never get to that: task io-wq worker -------------------------------------------------------------- io_write() io_kiocb_start_write() (takes sb_writers, hidden from lockdep by __sb_writers_release) write_iter() -> -EIOCBQUEUED ioctl(FS_IOC_SHUTDOWN) bdev_freeze() freeze_super() percpu_down_write() <- waits for the reader above io_write() kiocb_start_write() percpu_down_read() <- queued behind the writer <bio completes> io_complete_rw() queues io_req_rw_complete() <- never runs, task is in D state End the write from io_complete_rw() instead, and leave only the fsnotify calls in task_work. | ||||
| CVE-2026-97616 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release all action references on NEWACTION failure When a batched RTM_NEWACTION request replaces an existing action, tcf_idr_check_alloc() takes a temporary reference on it. If a later action fails to initialize, tcf_action_destroy() uses strict release semantics to clean up the actions initialized so far. For an action bound to a filter, the strict check returns -EPERM without dropping the temporary reference. This error also makes tcf_action_destroy() return before releasing subsequent entries. Any new action initialized between the bound action and the failing entry is leaked together with its reserved IDR slot, preventing reuse of its index. Use tcf_idr_release() to drop each reference held by the batch without rejecting bound actions. This allows cleanup to continue through all initialized entries and preserves the module reference release when an action is destroyed. Explicit action deletion and flushing retain their separate bind-count checks. | ||||
| CVE-2026-97615 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch. | ||||
| CVE-2026-97613 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq(). | ||||
| CVE-2026-97609 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: prevent UAF during module unload nf_ct_set_timeout() protects the timeout hook dereference and policy lookup with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net operations before it clears the hook. This allows the following interleaving: CPU 0 CPU 1 cttimeout_exit() nf_ct_set_timeout() unregister_pernet_subsys() rcu_read_lock() kfree(pernet) h = nf_ct_timeout_hook h->timeout_find_get() nfct_timeout_pernet() The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the already freed per-net timeout list. KASAN reported: BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get Read of size 8 by task poc/90 Call Trace: ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout] nf_ct_set_timeout+0x7b/0x3c0 xt_ct_tg_check+0x724/0xb20 xt_check_target+0x234/0xa90 do_ipt_set_ctl+0x570/0x1270 Allocated by task 89: __kmalloc_noprof+0x16e/0x460 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 Freed by task 91: kfree+0x131/0x390 ops_undo_list+0x3d4/0x730 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout] Clear the hook and wait for existing readers before unregistering the per-net operations. This blocks new policy lookups and ensures readers that observed the hook finish before the per-net storage is freed. | ||||
| CVE-2026-97605 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure. | ||||
| CVE-2026-97599 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: hwsim: serialize pib updates to fix double-free hwsim_update_pib() does an unserialized read-swap-free of phy->pib: pib_old = rtnl_dereference(phy->pib); ... rcu_assign_pointer(phy->pib, pib); kfree_rcu(pib_old, rcu); It assumes the RTNL is held, but ->set_channel is not always called under it: the mac802154 scan worker changes channels via drv_set_channel() without the RTNL. Such an update can race an RTNL-held one on the same phy; both read the same pib_old and both kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves batching kfree_rcu(), this surfaces as a KASAN invalid-free in rcu_free_sheaf(). struct hwsim_phy has no lock for pib. Add one and make the swap atomic with rcu_replace_pointer() under it, dropping the misleading rtnl_dereference(). | ||||
| CVE-2026-97597 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New-label admission remains under the existing mem_check() policy. Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching mem_check(). An unprivileged user must not bypass the cap by creating a user namespace and a netns where they have CAP_NET_ADMIN, which would still consume host memory. Check the capability only when the socket reaches the limit, so successful unprivileged GET requests below the cap do not generate a capability audit. Do the admission check before updating linger and expires so a rejected GET does not refresh the shared label, matching the existing socket-list allocation failure path. | ||||
| CVE-2026-97594 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97582 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix use-after-free in alarm work fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fan_data and the hwmon device are still alive. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-97567 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent race between disconnect() and rtx Sashiko noted that the two event can race, leading to inconsistent status. Prevent the race using the synchronous timer stop operation. | ||||
| CVE-2026-97566 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0 The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement entry alive when removing the id 0 endpoint. This happens because the id 0 removal path does not tear down pending announcements, unlike the non-zero id path. When the PM later reselects id 0 after adding another signal endpoint, it finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel()) in mptcp_pm_announced_alloc(). Root cause: asymmetry between removal paths. - Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls mptcp_pm_remove_announced() to clean up. - Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely. Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove() and decrement add_addr_signaled before queuing the RM_ADDR. Subtle detail: signal endpoints are stored in anno_list with port 0, but msk_local carries the connection's local port. In other words, entries linked to ID0 paths should have port == 0. A follow-up patch will ensure that. mptcp_pm_announced_remove() uses use_port=true for comparison. So clear the port before the lookup. | ||||
| CVE-2026-97564 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. | ||||
| CVE-2026-97561 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid When the administrator mounts with forceuid or forcegid (uid=/gid= mount options), they expect all files to appear owned by the specified user/group. However, several code paths unconditionally called sid_to_id() to overwrite cf_uid/cf_gid with server-provided values, ignoring the administrator's explicit override: - smb311_posix_info_to_fattr() (stat via POSIX extensions) - cifs_posix_to_fattr() (readdir via POSIX extensions) - parse_sec_desc() (CIFS ACL ownership mapping) This allowed an untrusted server to dictate local file ownership even when the mount was configured to force specific uid/gid values. Fix all three call sites to check CIFS_MOUNT_OVERR_UID and CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the same pattern already used by cifs_unix_basic_to_fattr() for unix extensions. | ||||
| CVE-2026-97559 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond what a u16 can hold. A wraparound is reached with 863 ACEs. After the wraparound, ndacl_ptr->size becomes meaningless and the offset will point anywhere in the ACE array. As a result, we will see corruption of the DACL, which then gets sent to the server. This is not an out-of-bounds write as the allocation now covers the worst-case expansion, so writes will always go into the buffer. Adjust the code to use a u32 internally and return -EOVERFLOW in the overflow case. The operation must be refused, because a DACL can only hold 2^16-1 bytes on the wire and larger DACLs cannot be represented. set_chmod_dacl() carries the same pattern and is fixed the same way. It only wraps once the source DACL comes within roughly 380 bytes of the 64K ceiling, but the failure mode is identical. | ||||
| CVE-2026-97558 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in that interval requeues the running work, and the callback then clears the flag, leaving the requeued work pending with the flag down. A later cifs_open() can reuse the handle and its cifs_close() reaches the same branch: queue_delayed_work() fails because the work is still pending, but cifs_close() returns without dropping the closing file's reference. The cifsFileInfo count stays pinned and its tlink, dentry and server handle are leaked. Check the return value and hand off the reference only when work was actually queued. Otherwise, use the shared _cifsFileInfo_put(), like the mod_delayed_work() branch above: the pending execution already owns its reference. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-97557 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount in cifs_queue_oplock_break() cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again and are leaking this reference. This can be triggered when interacting with a slow-responding server. As a result, later unmount operations for this file system will fail with BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) kernel BUG at fs/super.c:777! Fix this by only incrementing the reference count if the work has been queued successfully. Taking it after queue_work() is safe because all three callers hold tcon->open_file_lock across the call and _cifsFileInfo_put() decrements under that same lock, so a worker that starts the handler in the window cannot drop the reference before it has been taken. | ||||
| CVE-2026-97556 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion patch to cifs_queue_oplock_break(). This would trigger a crash due to busy inodes on the next unmount: BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) Drop the reference on that path as well. Doing so before the out label mirrors the normal path, which also puts the reference before cifs_done_oplock_break(). Found by Sashiko code review. The failure path was not exercised at runtime. | ||||
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||