Export limit exceeded: 421390 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 54487 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54487 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64269 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). | ||||
| CVE-2024-38620 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. | ||||
| CVE-2026-28896 | 1 Apple | 1 Macos | 2026-08-22 | 7.7 High |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An attacker may be able to cause unexpected system termination or read kernel memory. | ||||
| CVE-2026-65795 | 1 Microsoft | 21 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 18 more | 2026-08-22 | 6.7 Medium |
| Relative path traversal in Windows DNS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72204 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: centalize $INDEX_ROOT header validation Add a dedicated helper to perform stricter validation of $INDEX_ROOT and use it for both directory inodes and named index inodes. This keeps the root size and header geometry checks consistent across both read paths. | ||||
| CVE-2026-72206 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate index block header more strictly Modify ntfs_index_block_inconsisent() to perform stricter validation of INDEX_HEADER geometry in INDX blocks, and update ntfs_lookup_inode_by_name() to use that function to validate INDX blocks. | ||||
| CVE-2026-72209 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate attribute values on lookup ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value. A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large. Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s(). Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths. This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match. Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident. | ||||
| CVE-2026-72210 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one in mapping pairs decoding bounds checks In ntfs_mapping_pairs_decompress(), attr_end points one byte past the end of the attribute record: attr_end = (u8 *)attr + le32_to_cpu(attr->length); The two bounds checks validating that mapping pair data bytes fit within the attribute use strict greater-than (>), which allows a one-byte out-of-bounds read when the data extends exactly to attr_end: b = *buf & 0xf; if (b) { if (unlikely(buf + b > attr_end)) // off-by-one goto io_error; for (deltaxcn = (s8)buf[b--]; b; b--) deltaxcn = (deltaxcn << 8) + buf[b]; } When buf + b == attr_end, the check evaluates to false and buf[b] reads one byte past the valid attribute boundary. The same pattern appears in the LCN delta bytes check. Fix both checks to use >= so that buf[b] at exactly attr_end is correctly rejected as out of bounds. | ||||
| CVE-2026-8836 | 2 Lwip, Lwip-tcpip | 2 Lwip, Lwip | 2026-08-22 | 9.8 Critical |
| A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue. Two separate issue reports were submitted to the project. Their processing was merged as a duplicate. | ||||
| CVE-2026-72227 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: avoid OOB read of num_dests header Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is attempted to check whether enough space is actually in the network header. But instead of using offsetofend() to check for the whole size (2) which must be accessible, offsetof() of is called. The latter is always returning 0. The comparison with the network header length will always return that enough data is available - even when only 1 or 0 bytes are accessible. Instead of using offsetofend(), use the more common check for the whole header. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||
| CVE-2026-72339 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | ||||
| CVE-2026-72289 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Check the interrupt is still ours before migrating it vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it. | ||||
| CVE-2026-72294 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt() Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here add irq validility cheking in kvm_vcpu_ioctl_interrupt(). | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72417 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto() Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before using it to compute the header size, avoiding out-of-bounds access with malformed IP headers. While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP constant when setting ctx->tun.proto and reference ctx->tun.hdr_size when updating ctx->offset. | ||||