Export limit exceeded: 413273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 15697 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15697 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-110011 | 2 Deluxeblogtips, Wordpress-extensions | 2 Mb Custom Post Types \& Custom Taxonomies, Mb Custom Post Types & Custom Taxonomies | 2026-10-22 | 2.7 Low |
| The MB Custom Post Types & Custom Taxonomies WordPress plugin before 2.12.3 does not perform a capability check in its export feature, allowing users with a role as low as Contributor to read the configuration of admin-only custom post types and taxonomies, as well as the titles, dates, statuses and some stored content of other users' non-public posts and pages. | ||||
| CVE-2026-110010 | 2 Deluxeblogtips, Wordpress-extensions | 2 Mb Custom Post Types \& Custom Taxonomies, Mb Custom Post Types & Custom Taxonomies | 2026-10-22 | 4.8 Medium |
| The MB Custom Post Types & Custom Taxonomies WordPress plugin before 2.12.3 does not perform any capability or authentication check before allowing an unauthenticated request to re-run a legacy data migration, letting anyone revert a custom post type or taxonomy definition on sites upgraded from a pre-2.0 release back to its pre-upgrade state. This discards configuration changes an administrator made after upgrading and, where those changes had restricted a definition's visibility, silently re-exposes the definition and its content to anonymous visitors. | ||||
| CVE-2026-110982 | 1 Wordpress-extensions | 1 Ai Engine | 2026-10-22 | 4.9 Medium |
| The AI Engine WordPress plugin before 3.8.6 does not check that the caller is allowed to edit the targeted object before updating its title and excerpt, allowing users with the Editor role and above to modify arbitrary posts of any type, including content they cannot otherwise edit such as navigation menus, block templates, global styles and WooCommerce coupons. | ||||
| CVE-2026-84284 | 1 Gitlab | 1 Gitlab | 2026-10-22 | 5.3 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.11 before 19.2.8, 19.3 before 19.3.6, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an unauthenticated user to read work item contents from private groups and projects due to incorrect authorization checks. | ||||
| CVE-2026-114131 | 1 Nuxt | 1 Nuxt | 2026-10-22 | 6.5 Medium |
| Nuxt is an open-source web development framework for Vue.js. From 3.11.0 until 3.21.4 and 4.4.4, Nuxt compares route-rule keys with the raw request path while route resolution decodes dynamic and catch-all parameters, allowing a percent-encoded segment to resolve to a protected page without matching the routeRules entry intended for that path. As a result, appMiddleware can be skipped during server rendering and an unauthenticated requester can receive the gated page and its SSR data. The same mismatch affects app-manifest rules including redirect, appLayout, ssr, prerender, and payload flags derived from cache, isr, and swr. This vulnerability is fixed in 4.4.4 and 3.21.4. | ||||
| CVE-2026-114132 | 1 Nuxt | 1 Nuxt | 2026-10-22 | N/A |
| Nuxt is an open-source web development framework for Vue.js. Prior to 4.6.2, Nuxt resolves pages case-insensitively by default while Nitro matches server-side route-rule keys case-sensitively, allowing a request whose path differs only by letter case to render without the server rule intended for that page. The mismatch can skip redirect, headers, proxy, ssr: false, and noScripts, and can cause getRouteRules(event) and matchRouteRules to return no rule for the case variant. Applications that set router.options.sensitive: true in nuxt.config are not affected; setting sensitive only in app/router.options.ts does not establish this exclusion because the server follows the nuxt.config value. Access checks implemented in server middleware, page route middleware, or page data fetching remain independent of this matcher. This issue is fixed in version 4.6.2. | ||||
| CVE-2026-115323 | 1 Evershop | 1 Evershop | 2026-10-22 | 7.3 High |
| EverShop 1.2.2 before 2.2.1 contains a missing authorization vulnerability in the customer address API that allows unauthenticated attackers to manage other customers' addresses. Attackers who know customer and address UUIDs can send POST, PATCH, or DELETE requests to /api/customers/:customer_id/addresses routes to add, modify, or delete saved shipping addresses. | ||||
| CVE-2026-114057 | 1 Arcadedata | 1 Arcadedb | 2026-10-22 | 4.3 Medium |
| ArcadeDB from 26.2.1 before 26.10.1 contains a missing authorization vulnerability in the Bolt protocol handler that allows authenticated users to enumerate all database names. Attackers with credentials for any single database can issue a SHOW DATABASES query over the Bolt port to reveal unauthorized database names, exposing tenant or project identifiers. | ||||
| CVE-2026-114058 | 1 Arcadedata | 1 Arcadedb | 2026-10-22 | 4.3 Medium |
| ArcadeDB from 26.2.1 before 26.10.1 contains a missing authorization vulnerability in the Bolt protocol handler that lets authenticated users read other databases' schema metadata. Attackers with credentials for one database can set the db field in RUN or BEGIN messages and call db.labels() or SHOW INDEXES to enumerate unauthorized schemas. | ||||
| CVE-2026-114059 | 1 Arcadedata | 1 Arcadedb | 2026-10-22 | 7.5 High |
| ArcadeDB before 26.10.1 contains a remote code execution vulnerability that allows authenticated users, including read-only reader role holders, to execute Groovy code because GremlinQueryEngine.command() lacks scripting authorization checks. Attackers can submit Gremlin commands to the POST /api/v1/command/{database} endpoint when the Groovy engine is enabled to run OS commands as the server process user. | ||||
| CVE-2026-114067 | 1 Triggerdotdev | 1 Trigger.dev | 2026-10-22 | 6.5 Medium |
| Trigger.dev 4.5.0 before 4.6.2 contains an improper authorization vulnerability in the PUT snapshot-url session endpoint that allows public session token holders to obtain presigned S3 write URLs. End users can overwrite their own session's durable chat snapshot to forge the agent's conversation history, since the route lacks a secret-key-only check. | ||||
| CVE-2026-105926 | 1 Apache | 1 Pulsar | 2026-10-22 | N/A |
| The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected. An authenticated client without any permission on the target topic, namespace or tenant could use these commands to: - read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed. - register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator. The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first. This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. | ||||
| CVE-2026-105927 | 1 Apache | 1 Pulsar | 2026-10-22 | N/A |
| The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user. As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy. The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace. This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure. | ||||
| CVE-2026-105930 | 1 Apache | 1 Pulsar | 2026-10-22 | N/A |
| When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way. An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability. This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. | ||||
| CVE-2026-105931 | 1 Apache | 1 Pulsar | 2026-10-22 | N/A |
| The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected. As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement. The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant. The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure. | ||||
| CVE-2026-105932 | 1 Apache | 1 Pulsar | 2026-10-22 | N/A |
| The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions. As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. The practical impact is limited by two broker configuration requirements, neither of which is met by default: - Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker. - Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch. In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints. This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 3.3.x and 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch. | ||||
| CVE-2026-96391 | 1 Drupal | 1 Webform | 2026-10-22 | N/A |
| Missing Authorization vulnerability in Drupal Webform REST allows Forceful Browsing. This issue affects Webform REST versions: from 0.0.0 to 4.2.1. | ||||
| CVE-2026-111812 | 2 Apache, Apache Software Foundation | 3 Apache Traffic Server, Traffic Server, Apache Traffic Server | 2026-10-22 | 10 Critical |
| Apache Traffic Server's origin_server_auth plugin lets a client force signing of attacker-chosen AWS request headers under the proxy's own credentials. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. | ||||
| CVE-2026-114135 | 1 Jupyter | 1 Jupyter Server | 2026-10-22 | 8.8 High |
| Jupyter Server is the backend for Jupyter web applications. From 2.0.0 until 2.6.0, enabling GatewayClient.url replaced the normal KernelWebsocketHandler with WebSocketChannelsHandler, which authenticated the user but did not call authorizer.is_authorized(...) for the execute action on the kernels resource. A restricted authenticated user could therefore open an upstream kernel channel and obtain kernel execution despite the configured Authorizer denying that action, exposing data and credentials available to the kernel and permitting modification or disruption of the kernel environment. The default gateway configuration is fixed in version 2.6.0. In 2.6.0 and later, the same authorization bypass remains possible when a deployment manually registers the deprecated jupyter_server.gateway.handlers module, because its handler still omits the configured kernel-execute authorization decision. | ||||
| CVE-2026-76304 | 1 Splunk | 1 Splunk | 2026-10-22 | 4.3 Medium |
| In Splunk SOAR versions below 8.7.0, an authenticated user who does not hold a role with permission to edit Automation Brokers could download the Splunk SOAR Automation Broker Docker Compose configuration file. The file contains the Uniform Resource Locator (URL) of the Splunk SOAR instance, the container image location, and the Splunk SOAR Automation Broker version. The vulnerability is possible because Splunk SOAR returns the configuration file without enforcing the Automation Broker edit permission. For more information see Install Splunk Automation Broker on a Docker host (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/install-and-create-classic-splunk-soar-automation-brokers/install-splunk-automation-broker-on-a-docker-host) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. | ||||