Export limit exceeded: 93046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93046 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72493 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-72324 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: free generic chips on unbind irq_alloc_domain_generic_chips() allocates generic chip data that must be freed via irq_domain_remove_generic_chips(). The devres action mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set. Call irq_domain_remove_generic_chips() explicitly before irq_domain_remove() instead. | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72098 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | ||||
| CVE-2026-68436 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use kvzalloc to allocate struct dc struct dc has grown large over time (most of it the two inlined dc_scratch_space copies) and now sits close to the page allocator's 4 MiB contiguous allocation limit. Its actual size is not fixed by the source alone, it also depends on the compiler and the .config, so it can easily cross 4 MiB, e.g. with a newer GCC or a config change. dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER, so the page allocator warns and returns NULL. dc_create() then fails, DM init fails and amdgpu probe aborts with -EINVAL: WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380 dc_create+0x38/0x660 [amdgpu] amdgpu_dm_init+0x2d9/0x510 [amdgpu] dm_hw_init+0x1b/0x90 [amdgpu] amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu] amdgpu_driver_load_kms+0x19/0x80 [amdgpu] amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu] dc_create() then returns NULL and DM init fails, which aborts the whole GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block <dm> failed -22"), leaving the display unusable. The subsequent amdgpu_irq_put() warnings during teardown are just fallout of unwinding a half-initialized device. struct dc is a software-only bookkeeping structure that is never handed to hardware DMA and is only ever kept as an opaque pointer, so it does not require physically contiguous memory. Allocate it with kvzalloc() (and free it with kvfree()) so that the allocator can fall back to vmalloc() when a contiguous allocation of that size is not available, which also avoids the MAX_PAGE_ORDER warning entirely. v2: - Rebase to amd-staging-drm-next. (cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) | ||||
| CVE-2026-68412 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it. | ||||
| CVE-2026-68401 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable. | ||||
| CVE-2026-68258 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on CRIU restore queue type and mqd size We weren't checking whether the values provided in the private data in kfd CRIU restore were within bounds. For queue type, add a KFD_QUEUE_TYPE_MAX and ensure the provided type is less than it. For mqd_size, add new function mqd_size_from_queue_type and confirm that the provided mqd_size matches expectations. (cherry picked from commit f19d8086f6644083c913d70bfdeee20e1b6f46a5) | ||||
| CVE-2026-68241 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/mst: limit DP MST ESI service loop The loop in intel_dp_check_mst_status() keeps servicing interrupts originating from the sink without bound. Add an upper bound to the new interrupts occurring during interrupt processing to not get stuck on potentially stuck sink devices. Use arbitrary 32 tries to clear incoming interrupts in one go. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Note: The condition likely pre-dates the commit in the Fixes: tag, but this is about as far back as a backport has any chance of succeeding. Before that, the retry had a goto. (cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) | ||||
| CVE-2026-68238 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) | ||||
| CVE-2026-68211 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68203 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection. | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64241 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: teardown bugs and resource leaks Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. [Bartosz: don't emit an error message on devres allocation failure] | ||||
| CVE-2026-64146 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix metabuf leak in inode xattr initialization commit bb88e8da0025 ("erofs: use meta buffers for xattr operations") converted xattr operations to use on-stack erofs_buf instances. erofs_init_inode_xattrs() uses such a metabuf while reading the inline xattr header and shared xattr id array. Some error paths after erofs_read_metabuf() leave through out_unlock without dropping the metabuf, so the folio reference can leak. Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a no-op if no folio has been acquired, and this keeps all paths after taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. | ||||
| CVE-2026-64060 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix leak of request in netfs_write_begin() error handling Fix netfs_write_begin() to not leak our ref on the request in the event that we get an error from netfs_wait_for_read(). | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-63999 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. | ||||