Export limit exceeded: 45398 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (45398 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97531 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under vport_slock, takes a vref_count on the matching vport and calls qla_update_host_map() to register its port id. A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then qla24xx_disable_vp() removes the vport from the host_map btree and zeroes vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later, in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX) but does not touch host_map. In the window in between, report ID acquisition can still find the vport on vp_list and call qla_update_host_map(); with d_id already zeroed it takes the btree_insert32() path and re-inserts the dying vport into host_map. Nothing cleans that entry afterwards, so once scsi_host_put() frees the vha a later host_map lookup dereferences freed memory. Skip a vport that has VPORT_DELETE set before taking the reference, so it is neither re-registered nor scheduled for DPC re-registration. This mirrors the existing guard in qla2x00_alert_all_vps(). | ||||
| CVE-2026-97530 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both helpers, keeping the entry_type guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers and re-processes on the next interrupt once all continuation IOCBs have arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the signature field is never read on a continuation IOCB, eliminating the payload-aliasing lockup. | ||||
| CVE-2026-97528 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there. | ||||
| CVE-2026-97515 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state. | ||||
| CVE-2026-97492 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed In case reconfiguration of NAN fails, we call ieee80211_handle_reconfig_failure, that marks all interfaces as not in the driver. Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces is called to destroy all the interfaces. If we have any other interface but the NAN one, for example a BSS station, then when its state (links, stations) will be removed, we won't tell the driver about this, because we will think that the interfaces are not in the driver, and then drivers might remain with dangling pointers to objects like stations and links (at least for iwlwifi this is the case). ieee80211_handle_reconfig_failure is meant to be called after we cleaned up the state in the driver, there is no reason to call it for NAN reconfiguration failure. Fix the code to just warn in such a case, as we do in other error paths in reconfig where it is too complicated to rewind. | ||||
| CVE-2026-97478 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: acrn: Fix irqfd use-after-free during eventfd shutdown acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free the same struct hsm_irqfd: CPU0 CPU1 ---- ---- eventfd_release() wake_up_poll(EPOLLHUP) hsm_irqfd_wakeup() queue_work(&irqfd->shutdown) acrn_irqfd_deassign() hsm_irqfd_shutdown() list_del_init() eventfd_ctx_remove_wait_queue() eventfd_ctx_put() kfree(irqfd) hsm_irqfd_shutdown_work() container_of(work, ..., shutdown) irqfd->vm <-- use-after-free The deassign path freed the irqfd while a shutdown work item was already queued by EPOLLHUP (or vice versa), so the work item could resurrect a dangling pointer through container_of(). Switch to the lifetime model used by KVM irqfds: - Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds under irqfds_lock and queue the cleanup work. - hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the eventfd waitqueue entry, drops the eventfd reference and frees the irqfd. - A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit() ensures the cleanup work is queued at most once, no matter how many of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to call from the waitqueue callback, which runs with wqh->lock held and IRQs disabled and therefore cannot take irqfds_lock. - acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the eventfd is fully detached on return. acrn_irqfd_deinit() deactivates every irqfd, flushes the workqueue and only then destroys it, so no path can queue_work() onto a torn-down workqueue. - acrn_irqfd_assign() now installs the eventfd waitqueue entry and publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is never visible to deassign/deinit before its waitqueue entry is in place, and any EPOLLHUP that fires in the assign window queues cleanup work that blocks on irqfds_lock until publication is done. | ||||
| CVE-2026-97432 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix P2P-Device binding handling Our binding handling for P2P-Device can run into the following scenario, as observed by our testing: - a station interface is connected on some channel - the P2P-Device does a remain-on-channel (ROC) on that channel - the ROC ends, and the P2P-Device is removed from the binding, but the phy_ctxt pointer is left around as a PHY cache so we don't need to recalibrate to the channel again and again in case it's not shared - a binding update by the station interface, even a removal, will re-add the P2P-Device to the binding - the P2P-Device is removed, which removes the PHY context, but it's still in the binding so the firmware crashes Since the P2P device is removed from the binding and only re- added by unrelated code, but we want to keep the phy_ctxt around as a cache for future ROC usage, fix it by adding a boolean that indicates whether or not the P2P-Device should be added to the binding, and handle that in the binding iterator. That way, the station interface cannot re-add the P2P-Device to the binding when that isn't active. | ||||
| CVE-2026-97412 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: quiesce DMA before freeing resources pdsc_teardown() frees DMA buffers but does not disable bus mastering, leaving the device able to perform DMA after the buffers are freed. This can lead to use-after-free if the device writes to freed memory. Add pci_clear_master() to pdsc_teardown() to disable bus mastering before freeing resources, ensuring all DMA is quiesced. Add pci_set_master() to pdsc_setup() to re-enable bus mastering, which is needed for the firmware recovery path since pdsc_teardown() now disables it. | ||||
| CVE-2026-93828 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix handling of damaged volume in exfat_create_upcase_table() When the size of the upcase table is set to zero in the dentry for any reason(e.g. corrupted media or misbehaving device), an integer overflow causes the module to loop indefinitely. If the size of the upcase table is read zero, do not attempt to load the table. Instead, fallback to loading the default upcase table. If the size of the upcase table is zero or no upcase table is found, raise exfat_fs_error() to mark the volume read-only. | ||||
| CVE-2026-93817 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix addr_filter_ranges lifetime Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed. | ||||
| CVE-2026-93796 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: null RX pointers after free When iwl_pcie_tx_init() fails after RX init, nic init unwinds via iwl_pcie_rx_free(). The freed RX members stayed non-NULL on the live transport object, so later teardown or retry could touch stale RX state. Set rx_pool, global_table, rxq, and alloc_page to NULL after free to make repeated cleanup and retry paths safe. | ||||
| CVE-2026-93228 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list. | ||||
| CVE-2026-90161 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache. | ||||
| CVE-2026-90105 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing. | ||||
| CVE-2026-90021 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref to 1 and it can only be incremented when a sound card is registered via f_midi_register_card(). f_midi_register_card() is only called in f_midi_bind() which actually performs INIT_WORK. If f_midi_bind() is never run, work is not initialized and the if condition in f_midi_free becomes true, this results in a warning later in __flush_work as work->func = 0. Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc(). | ||||
| CVE-2026-89763 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix TPM teardown ordering trusted_tpm_exit() drops the TPM chip reference and frees the digest array before unregistering the trusted key type. key_type_lookup() holds key_types_sem for reading until the key operation finishes, while unregister_key_type() takes it for writing. It therefore provides the synchronization point that must precede backend teardown. The current order permits this interleaving: CPU 0 CPU 1 trusted_tpm_exit() key_type_lookup("trusted") put_device(&chip->dev) trusted_tpm_seal() kfree(digests) pcrlock() unregister_key_type() tpm_pcr_extend(..., digests) CPU 1 can consequently dereference the freed digest array. The chip can also be released before callbacks stop using it. KASAN reported: BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200 Read of size 2 at addr ffff88810872d000 by task poc/89 Call Trace: tpm_pcr_extend+0x1f0/0x200 pcrlock+0x42/0x70 [trusted] trusted_tpm_seal+0x1b6/0x570 [trusted] trusted_instantiate+0x293/0x340 [trusted] __key_instantiate_and_link+0xb2/0x2b0 __key_create_or_update+0x61e/0xb50 __do_sys_add_key+0x1b8/0x310 Allocated by task 88: __kmalloc_noprof+0x1a7/0x490 do_one_initcall+0xa1/0x390 do_init_module+0x2df/0x840 Freed by task 90: kfree+0x131/0x3c0 trusted_tpm_exit+0x59/0xa0 [trusted] __do_sys_delete_module+0x346/0x510 Move unregister_key_type() before releasing either resource. This stops new lookups and waits for in-flight key operations to finish before the backend state is destroyed. | ||||
| CVE-2026-89762 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix cred UAF caused by begin_current_label_crit_section() AppArmor's begin_current_label_crit_section() is a scary function called from lots of LSM hooks (in particular VFS/socket-related ones) that checks if the label referenced by the current creds is marked FLAG_STALE, and if so, attempts to use aa_replace_current_label() to replace the creds with an updated version that uses a new label. The first problem with this is that it would directly lead to UAF of `struct cred` if anything in the kernel takes a pointer to the current creds and accesses these past a security hook invocation that replaces creds, like so: ``` const struct cred *cred = current_cred(); alloc_file_pseudo(...); uid_t uid = cred->euid; ``` I don't know if anything in the kernel actually does this, but I think it is very surprising that this pattern could lead to UAF. The second problem is that things go wrong when aa_replace_current_label() runs with overridden credentials. aa_replace_current_label() bails out if `current_cred() != current_real_cred()` (mirroring the check in proc_pid_attr_write()), but this check can't actually reliably detect overridden credentials because the overridden creds can be the same as the objective creds. So in approximately the following scenario, things go wrong: 1. task begins with <creds A> (as both objective and subjective creds), with refcount=2 2. task grabs an extra reference on <creds A> for overriding 3. task calls override_creds(<creds A>), which returns a pointer to the old subjective creds (<creds A>) 4. task enters AppArmor LSM hook 5. AppArmor checks that objective/subjective creds are equal 6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on <creds A> 7. task leaves AppArmor LSM hook 8. task calls revert_creds(<creds A>) 9. now task->cred is <creds A> while task->real_cred is <creds B>, but the task_struct logically holds two references to <creds B> 10. another task drops the extra reference on <creds A> that was used for overriding, refcount drops to 0 11. now task->real_cred points to freed creds At this point, any access to current_cred() will be UAF. I have a test case where I run aa-disable on a profile while a process using that profile is blocked on splice() from a FUSE passthrough file into a full pipe; after the profile update, the pipe becomes empty, splice() resumes, the credentials go out of sync, and a subsequent getuid() syscall results in a KASAN UAF splat. To fix this, instead of directly replacing creds, do it via task_work that will run at the end of the current syscall. (The point in time at which the cred replacement happens should have no correctness impact; it is just a performance optimization to avoid unnecessarily touching the refcount of the new label.) Note that AppArmor still performs direct cred replacements in the sb_pivotroot LSM hook after this change, and that direct cred replacements can still happen in VFS ->write() callbacks via proc_pid_attr_write(). There are two options for what to do with aa_dup_task_ctx(): Either explicitly reset new->label_replacement_pending after the entire aa_task_ctx has been copied, or switch to manually copying members over. I am switching to manually copying members over because that should make bugs more obvious. | ||||
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-89740 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addition and removal together with their table updates so sibling operations cannot interleave. Reject an occupied slot rather than clobbering an active port during a duplicate-line probe. | ||||
| CVE-2026-89738 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or work item that is pending or running at either point dereferences the freed udc. Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and from the usb_add_gadget_udc() failure path in probe; the remaining probe error paths fail before the timer is armed. timer_shutdown_sync() waits for a running callback and clears timer->function, which makes the work handler's mod_timer() a permanent no-op; cancel_work_sync() then drains any pending or running work whose re-arm attempt now does nothing. The timer must be shut down first, since cancelling the work alone would let the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and work_struct are never initialized. This does not require a fault; a normal driver unbind can interleave with an already queued work item. This issue was found by an in-house static analysis tool. | ||||