Export limit exceeded: 16592 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 46812 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46812 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-104912 | 1 Misp | 1 Misp | 2026-10-03 | N/A |
| MISP contains an authorization flaw in its correlation handling during attribute searches. When a user performs an attribute search that triggers correlation lookups, the system authorized access to correlated attributes and events based on a stale distribution snapshot stored on the correlation row rather than the live event access control list. Because the correlation row's distribution columns are a point-in-time copy that lacks a published flag, the authorization check becomes incorrect when an event is subsequently restricted (for example, its sharing group is changed or it is unpublished). As a result, an authenticated user could retrieve attributes and event details belonging to events they no longer have permission to view. Preconditions: - An authenticated user with at least read access to some events in the instance. - The existence of correlations between events, at least one of which has been restricted after the correlation was created. Impact: - Confidentiality: exposure of attribute values and event metadata that the user is not authorized to access. Affected versions: MISP prior to v2.5.48. | ||||
| CVE-2026-104910 | 1 Misp | 1 Misp | 2026-10-03 | N/A |
| MISP contains an authorization bypass in the related events listing functionality. When a user requests the list of events correlated to a given event, the system retrieved related event metadata directly from the correlation table without re-validating the caller's access rights against each related event. The correlation table stores a snapshot of the event's distribution level and sharing group at the time the correlation was created, and does not carry the published flag. As a result, events that the caller is not permitted to open—because they are unpublished, or because their distribution or sharing group has changed since the correlation was recorded—were still returned with their metadata (title, date, correlating value counts). Preconditions: - An authenticated user with access to at least one event in MISP. - The existence of correlation entries linking that event to other events the user should not be able to view. Impact: - Unauthorized disclosure of event metadata (titles, dates, correlation counts) for events the user has no right to access. - Potential reconnaissance of threat-intelligence event names and timelines across sharing groups. Affected: MISP versions prior to the fix commit (2ffa97f05). | ||||
| CVE-2026-103913 | 2026-10-03 | 7.5 High | ||
| The GeoDirectory plugin for WordPress is vulnerable to SQL Injection via the stored latitude/longitude coordinates of a listing in versions up to, and including, 2.8.186. This is due to insufficient escaping and the absence of numeric validation on coordinate values when a listing is saved, combined with the direct string interpolation of those values into a distance sub-expression in geodir_gps_query_part() that is later executed by the public wp_ajax_nopriv_geodir_widget_listings handler when a caller supplies set_post=<pending-listing-id> and sort_by=distance_asc. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-98089 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd(). | ||||
| CVE-2026-98075 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject BPF_PSEUDO_FUNC reference to the main program fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real function addresses. This function is invoked from bpf_jit_subprogs() only when env->subprog_cnt > 1. Meaning that for any program like below: int main(void *ctx) { void *ptr = main; ... bpf_timer_set_callback(..., ptr); ... } The 'ptr' won't be ever converted to contain an address. In combination with e.g. bpf_timer_set_callback() this would lead to a function call at a bogus address. Instead of complicating the implementation, just assume that no useful program needs main to be a sync or async callback and reject BPF_PSEUDO_FUNC loads for the main subprogram. | ||||
| CVE-2026-98072 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()") folded both into clear_bit_unlock(), which strengthened the lock hand-off but silently dropped the full barrier the wake-up check depends on. The refill counterpart, release_refill() in net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for exactly this reason. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier. | ||||
| CVE-2026-98031 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: Initialize extack in remove_nh_grp_entry() remove_nh_grp_entry() prints the extack message when a listener fails to replace the reduced nexthop group. However, extack is not initialized and listeners are not required to set a message when returning an error. Neither netdevsim nor mlxsw do so when an allocation fails, resulting in the dereference of an uninitialized stack pointer. Fix by zero-initializing extack, as was done in commit 6347c5314cee ("nexthop: initialize extack in nh_res_bucket_migrate()"). | ||||
| CVE-2026-98026 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call later, besides we're initializing an unpublished structure anyway. [1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com | ||||
| CVE-2026-98017 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain. | ||||
| CVE-2026-98016 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC sample rules sharing the same restore context may re-read restore->count after dropping restore_lock. At that point another thread may already have completed cleanup and freed the restore object. Use the result of the refcount decrement while holding restore_lock to determine whether cleanup is needed. | ||||
| CVE-2026-98015 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is now made entirely under termtbl_mutex, and tt is not touched after kfree. | ||||
| CVE-2026-98014 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead of esw_vport_change_handle_locked() so vport->allmulti_rule is NULL before the change handler observes it. During FW-fatal recovery the disable runs while dev->state == INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode() fails and returns early, leaving vport->allmulti_rule intact, so esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries to vport->mc_list whose flow rules are then installed in the FDB by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the FDB with those refs still held, corrupting the sub-tree and leaving dangling flow_rule pointers in vport->mc_list. Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`: refcount_t: underflow; use-after-free. tree_put_node+0xef/0x110 [mlx5_core] clean_tree+0x44/0xd0 [mlx5_core] (x5) mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core] mlx5_unload+0x65/0xd0 [mlx5_core] ... mlx5_health_try_recover BUG: unable to handle page fault for address: 0000000003000055 down_write+0x1c/0x60 mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core] esw_del_mc_addr+0x7b/0x170 [mlx5_core] esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core] esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core] mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core] ... mlx5_load ... mlx5_health_try_recover esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule via its local state machine even when the FW del fails. With the rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change handler closes, no rules are installed during disable, and the reload starts with a clean mc_list. | ||||
| CVE-2026-98010 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: drr: clamp quantum in change class drr_change_class() rejects explicit quantum==0 but falls back to psched_mtu() with no floor. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless device) makes the deficit-refill loop spin under the qdisc lock. Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the fallback path. The explicit-zero reject is preserved. Conditions to recreate the bug: CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root drr tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 | ||||
| CVE-2026-98009 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: clamp quantum in parse and fallback paths ets_qdisc_change() falls back to psched_mtu() with no floor for bands without an explicit quantum. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the deficit-refill loop spin under the qdisc lock. Move the floor into ets_quantum_parse() so explicitly configured quanta are also clamped to [256, 1<<20], not just the fallback path. Conditions to recreate the bug: CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 | ||||
| CVE-2026-98006 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Decoupling ep1_in_urb in caiaq dev The epq_in_urb object belonging to the caiaq device is coupled within the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL) executes successfully, epq_in_urb is successfully added to the urbp_list queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD layer driver for the caiaq USB device). When init_card() calls snd_usb_caiaq_send_command() which subsequently fails due to a timeout, and proceeds to call snd_card_free() to release the card, the embedded ep1_in_urb object is also freed. When the dummy HCD driver detects that the URB has been unlinked, it returns the URB (by usb_hcd_giveback_urb()), which triggers [1]. Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch to using a pointer instead. Separately allocate and manage the memory for ep1_in_urb to prevent the release of the snd_card memory object from interfering with it. midi_out_urb has the same issue as ep1_in_urb and is handled in the same way. [1] BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96 Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29 Call Trace: usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96 dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019 __run_hrtimer kernel/time/hrtimer.c:2067 [inline] __hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124 hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141 Allocated by task 36: snd_card_new+0x7b/0x110 sound/core/init.c:184 create_card sound/usb/caiaq/device.c:429 [inline] snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544 Freed by task 36: snd_card_free_when_closed sound/core/init.c:630 [inline] snd_card_free+0x138/0x1d0 sound/core/init.c:662 snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553 | ||||
| CVE-2026-97987 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_input: reset device if input_register_device() fails Probe marks the device DRIVER_OK with virtio_device_ready() before calling input_register_device(). If registration fails, the error path cleared vi->ready and called del_vqs() while the device was still live, so the device could keep DMA to queues that were already torn down. Match remove/freeze: call virtio_reset_device() on that path before tearing down the virtqueues. | ||||
| CVE-2026-97986 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_input: stop callbacks before unregistering input device virtinput_remove() unregisters the input device before resetting the virtio device. virtinput_recv_events() drops vi->lock around input_event(), so clearing vi->ready does not stop a callback that passed the entry check. It can still use vi->idev, requeue buffers and kick the queue. Reset first, as virtinput_freeze() already does. With the preceding core change, reset waits for callbacks before input_unregister_device() can free vi->idev. Recheck vi->ready after taking the lock again: keep draining completed events so an input packet is not truncated, but stop requeueing buffers and kicking the queue. With evdev attached, input_unregister_handle() currently waits for an RCU grace period, which also waits out IRQ callbacks. This masks the lifetime bug on PCI and MMIO, but does not protect sleepable callbacks on other transports. | ||||
| CVE-2026-97982 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Fix budget accounting The gmac_rx() function returns the remaining NAPI budget, but its caller treats the return value as the number of packets received. An idle poll therefore reports a full budget and remains scheduled. Return the number of received packets instead. Preserve the existing free queue refill accounting by adding that count directly; continuing to subtract it from the budget would invert the refill behavior. | ||||
| CVE-2026-97977 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has to happen after btusb_stop_traffic(), otherwise an URB completion racing with the cancel can requeue the work right after it has been waited for. | ||||
| CVE-2026-97958 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:615) ? skb_release_data (net/core/skbuff.c:1122) ? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232) ? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499) ? tc_chain_notify (net/sched/cls_api.c:3045) ? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041) ? netlink_unicast (net/netlink/af_netlink.c:1335) ? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985) ? tc_ctl_chain (net/sched/cls_api.c:3242) ? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146) ? netlink_unicast (net/netlink/af_netlink.c:1354) ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177) ? netlink_rcv_skb (net/netlink/af_netlink.c:2556) ? netlink_unicast (net/netlink/af_netlink.c:1319) ? netlink_sendmsg (net/netlink/af_netlink.c:1900) ? __sock_sendmsg (net/socket.c:800) ? __sys_sendto (net/socket.c:2281) ? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284) ? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) ? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> | ||||