Export limit exceeded: 28089 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28089 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90259 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that function, we round down the start position and round up the ending position. But during the calculation of @len, we use "round_up(start + len, sectorsize)", which is the rounded up end position, not the rounded up length. Which results a much larger length, and later we are still using "start + len", which is completely incorrect. Fix it by declaring a local @aligned_start and @aligned_len and use them instead. | ||||
| CVE-2026-90205 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary. This patch (of 2): [BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access. BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_validate_inode_block() validates i_suballoc_slot but leaves the active ordinary orphan slot unchecked. Downstream consumers assume that the value is smaller than osb->max_slots. [FIX] Reject an active i_orphaned_slot outside the slot range during dinode validation, before the inode reaches orphan wipe processing. | ||||
| CVE-2026-90174 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user() ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with user->passkey_sz = resp->hash_sz; user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP); if (user->passkey) memcpy(user->passkey, resp->hash, resp->hash_sz); resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate_msg() does not bound hash_sz, so reject any response whose hash_sz exceeds the on-stack hash[] buffer before allocating and copying. [ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680 [ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611 [ 2030.242296] [ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy) [ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work [ 2030.242763] Call Trace: [ 2030.242769] <TASK> [ 2030.242776] dump_stack_lvl+0xa2/0xd0 [ 2030.242794] print_address_description+0x77/0x200 [ 2030.242815] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242831] print_report+0x58/0x70 [ 2030.242848] kasan_report+0x117/0x150 [ 2030.242869] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242888] kasan_check_range+0x3c7/0x3f0 [ 2030.242908] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242925] __asan_memcpy+0x29/0x70 [ 2030.242942] ksmbd_alloc_user+0x278/0x680 [ 2030.242960] ksmbd_login_user+0xc3/0x120 [ 2030.242978] ntlm_authenticate+0x5e6/0x1b00 [ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10 [ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0 [ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10 [ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0 [ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300 [ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10 [ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0 [ 2030.243208] handle_ksmbd_work+0x954/0x1280 [ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 2030.243249] ? process_scheduled_works+0xa07/0x1490 [ 2030.243270] ? process_scheduled_works+0xa07/0x1490 [ 2030.243291] process_scheduled_works+0xa70/0x1490 [ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10 [ 2030.243340] ? do_raw_spin_lock+0x130/0x300 [ 2030.243358] ? lock_is_held_type+0x7b/0x110 [ 2030.243388] worker_thread+0x932/0xe20 [ 2030.243415] kthread+0x38a/0x470 [ 2030.243431] ? __pfx_worker_thread+0x10/0x10 [ 2030.243451] ? __pfx_kthread+0x10/0x10 [ 2030.243467] ret_from_fork+0x484/0x910 [ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10 [ 2030.243501] ? __switch_to+0xc77/0x12c0 [ 2030.243523] ? __pfx_kthread+0x10/0x10 [ 2030.243540] ret_from_fork_asm+0x1a/0x30 [ 2030.243564] </TASK> [ 2030.243570] [ 2030.290164] Allocated by task 19279: [ 2030.290911] kasan_save_track+0x3e/0x80 [ 2030.292179] __kasan_kmalloc+0x72/0x90 [ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0 [ 2030.294467] handle_generic_event+0x59b/0x750 [ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340 [ 2030.296553] genl_rcv_msg+0x606/0x7b0 [ 2030.297129] netlink_rcv_skb+0x22b/0x4a0 [ 2030.298500] genl_rcv+0x2d/0x40 [ 2030.299273] netlink_unicast+0x7ba/0x930 [ 2030.300019] netlink_sendmsg+0x8c3/0xb00 [ 2030.301073] __sock_sendmsg+0xec/0x140 [ 2030.301579] __sys_sendto+0x357/0x470 [ 2030.302255] __x64_sys_sendto+0xe3/0x100 [ 2030.303425] do_syscall_64+0x135/0x460 [ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2030.305594] [ 2030.305819] The buggy address belongs to the object at ffff888121bb6640 [ 2030.305819] which belongs to the cache kmalloc-192 of size 192 [ 2030.309595] The buggy address ---truncated--- | ||||
| CVE-2026-90112 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range checks to the legacy image before reading its fixed fields. | ||||
| CVE-2026-89906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-74747 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed. | ||||
| CVE-2026-74729 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. | ||||
| CVE-2026-74723 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-72488 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix. | ||||
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-68293 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords. | ||||
| CVE-2026-68247 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: range check LFP Data Block panel_type2 While the panel_type from LFP Data Block is range checked, panel_type2 is not. Add a few helpers for range checking, and use them to not only check panel_type2, but also improve clarity and correctness in the panel type selection. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: - Fix commit message typo (Michał) - Add is_panel_type_pnp() (Ville) (cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) | ||||