Export limit exceeded: 413957 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 93016 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93016 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98126 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for zero range When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE, smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing the file to grow beyond the caller's file-size limit. Fix this by calling inode_newsize_ok() before sending the zero-range request when the operation would extend EOF. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 truncate -s 2M "$FILE" fallocate --zero-range -o 0 -l 4M "$FILE" echo "fallocate rc=$?" stat -c "file size=%s" "$FILE" ' Before this change, the operation succeeds despite the 3 MiB limit: fallocate rc=0 file size=4194304 After this change, fallocate fails and leaves the file at 2 MiB. | ||||
| CVE-2026-19630 | 2 Isc, Redhat | 3 Bind, Bind 9, Hummingbird | 2026-10-22 | 7.5 High |
| In a BIND resolver, inbound DNS protocol messages with a particular structure will result in additional processing, with no limit imposed by BIND. A DNS message with a maliciously large number of such structures will cause BIND to consume disproportionate amounts of CPU time and memory during processing. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. | ||||
| CVE-2026-96365 | 1 Drupal | 1 Webform | 2026-10-22 | 7.5 High |
| Allocation of Resources Without Limits or Throttling vulnerability in Drupal Webform allows Excessive Allocation. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. | ||||
| CVE-2026-96357 | 1 Drupal | 1 Webform | 2026-10-22 | 4.6 Medium |
| Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal Webform allows Stored XSS. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. | ||||
| CVE-2025-58773 | 1 Ami | 1 Aptio V | 2026-10-22 | N/A |
| AMI APTIOV contains vulnerabilities in BIOS where users may cause "Out-of-bounds Write” by local access. Successful exploitation of this vulnerability could lead to buffer overflows, memory corruption, and arbitrary code execution, and also impact Confidentiality, Integrity, and Availability. | ||||
| CVE-2026-105044 | 1 Qingteng | 1 Host Adaptive Security Platform | 2026-10-22 | N/A |
| Improper Neutralization of Special Elements used in an OS Command in Security Toolbox versions before 20260929 in Qingteng Host Adaptive Security Platform (Host Monitoring) V3.0 allows an authenticated console administrator to execute arbitrary commands on attached clients via OS command injection | ||||
| CVE-2026-56387 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| The RTMP AMF parser in Apache bRPC accepts AMF string lengths and array counts directly from untrusted input. A remote unauthenticated attacker who can reach a bRPC server with RTMP enabled can send a small AMF payload with an excessive declared long string length or array count, causing excessive memory allocation or resource consumption before the parser rejects the incomplete payload. Root Cause: The AMF long string parser resized the destination string to the declared 32-bit length before validating that the stream contained that many bytes. ECMA array and strict array parsers also accepted 32-bit element counts without a configurable upper bound. Affected Scenarios: Deployments that enable the bRPC RTMP server component and accept RTMP traffic from untrusted clients. Direct uses of the AMF parser on untrusted data are also affected. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3353 Note: The fix introduces configurable AMF parsing limits. The default maximum string size is 64 MiB and the default maximum array element count is 1,048,576. Payloads above these limits are rejected. The limits can be adjusted with amf_max_string_size and amf_max_array_size. | ||||
| CVE-2026-56388 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process. Root Cause: RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty. Affected Scenarios: Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication. How to Fix: 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3354 Note: The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. | ||||
| CVE-2026-58064 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| The Redis protocol implementation in Apache bRPC allowed inline command parsing to allocate and copy the full connection buffer before a complete CRLF-terminated command was available. A remote attacker with access to a Redis-protocol bRPC service could send long inline inputs without a terminating CRLF to increase memory usage and CPU copy overhead, potentially causing denial of service. Root Cause: The Redis inline command parser allocated memory based on the current input buffer size and copied the entire buffer before determining the current inline command boundary. The existing redis_max_allocation_size limit was applied to RESP bulk strings and arrays, but not effectively to the inline command path before allocation. Affected Scenarios: Use Apache bRPC server with Redis protocol enabled and reachable by untrusted clients. How to Fix: 1. Upgrade Apache bRPC to version 1.18.0, which fixes this issue. 2. Apply the patch from PR https://github.com/apache/brpc/pull/3363 . Note: The fix applies redis_max_allocation_size to Redis inline command lines and scans for CRLF before allocating parser arena memory. Inline command lines exceeding this limit are rejected. | ||||
| CVE-2026-74757 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count. Root Cause: The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts. Affected Scenarios: Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3451 Note: No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload. | ||||
| CVE-2026-78066 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process. Root Cause: 1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB. 2) The AMF string readers allocate the declared length before the bytes are actually available. 3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing. 4) The sofa-pbrpc parser does not bound meta_size. 5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process. Affected Scenarios: Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients. How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3476 Note: After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size). | ||||
| CVE-2026-80463 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| Unbounded memory accumulation in the stream message reassembly path of Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to exhaust the memory of a server (denial of service) by sending an endless sequence of continuation data frames. Root Cause: The streaming RPC protocol bounds every single data frame by max_body_size, but a fragmented stream message accumulates continuation frames into one buffer (_pending_buf) without any limit on the accumulated size. A malicious peer that can open a stream can therefore keep sending continuation frames to make the receiver accumulate an arbitrarily large in-memory message. Since the default flow-control settings (socket_max_streams_unconsumed_bytes=0) do not throttle the sending rate, the receiver's memory grows until the process runs out of memory and crashes or becomes unavailable. Affected Scenarios: Services that accept streams from untrusted clients (for example using brpc::StreamAccept or brpc::StreamCreate with the built-in streaming protocol) are affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3489 Note: The fix limits the accumulated payload of a fragmented stream message to max_body_size (default 64MB). When the accumulated payload exceeds the limit, the pending fragments are released and the stream is closed with error EMSGSIZE. After applying the fix, legitimate fragmented stream messages larger than max_body_size will be rejected; you can adjust the gflag max_body_size to change the limit. | ||||
| CVE-2026-86147 | 1 Apache | 1 Brpc | 2026-10-22 | N/A |
| External control of file name or path and uncontrolled resource consumption in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers who can reach the builtin service port to create directories and truncate/overwrite files with the privileges of the server process, or to hold the process-wide CPU/contention profiler for an arbitrarily long time. Root Cause: 1. The builtin /flags service allows gflags carrying a validator to be modified at runtime via ?setvalue=. The bvar/mbvar dump path gflags (bvar_dump_file, bvar_dump_tabs, mbvar_dump_file) were registered with an accept-anything validator whose only purpose was to wake the dumping thread. A remote attacker could therefore repoint the dump path (e.g. GET /flags/bvar_dump_file?setvalue=/victim/dir/target followed by GET /flags/bvar_dump?setvalue=true, or the equivalent for mbvar_dump_file, which is used verbatim without a forced suffix), making the dumping thread recursively create directories and open/truncate files at attacker-chosen locations. Tab names in bvar_dump_tabs were appended to the path without sanitization, allowing '..' to escape the configured directory. 2. The /pprof builtin service did not clamp the ?seconds= parameter to FLAGS_max_profiling_seconds (a limit that /hotspots enforced). A single request such as ?seconds=2147483647 made the handler sleep for decades while holding the process-wide gperftools CPU profiler or bthread contention profiler, so /hotspots/cpu and /hotspots/contention returned 503 for everyone else during that time. Affected Scenarios: Any Apache bRPC server exposing the builtin services (enabled by default on the same port as normal RPC traffic) to untrusted networks. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3523 Note: After the fix, bvar_dump_file, bvar_dump_tabs and mbvar_dump_file can no longer be modified at runtime through the /flags builtin service. They can still be changed programmatically via google::SetCommandLineOption(), taking effect on the next dump cycle. The profiling duration of /pprof is now capped by the -max_profiling_seconds gflag (default 300 seconds), which can be adjusted by the server owner. | ||||
| CVE-2026-114404 | 1 Phpoffice | 1 Phppresentation | 2026-10-22 | 6.1 Medium |
| PHPOffice PHPPresentation 1.2.0 contains a cross-site scripting vulnerability in the HTML writer that allows attackers who supply presentation content to inject script into generated HTML. Attackers can craft a PPTX with malicious text runs, hyperlink relationship targets, or shape descr attributes that are emitted unescaped, executing script in viewers' browsers. | ||||
| CVE-2026-76490 | 1 Cisco | 1 Expressway Series | 2026-10-22 | 8.6 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76490 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787. | ||||
| CVE-2026-114386 | 1 Pydantic | 1 Pydantic-ai | 2026-10-22 | 4.8 Medium |
| Pydantic AI Harness before 0.59.0 fails to enforce UsageLimits.tool_calls_limit on nested tool calls dispatched from run_code in the CodeMode toolset. Users or prompt-injected content can make the sandboxed program invoke tools via run_nested_call() without check_before_tool_call, exceeding operator limits on costly or side-effecting tools. | ||||
| CVE-2026-76475 | 1 Cisco | 4 Cisco Unified Communications Manager, Emergency Responder, Unified Communications Manager Im And Presence Service and 1 more | 2026-10-22 | 9.3 Critical |
| As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76475 are related to issues concerning improper neutralization of input during web page generation that are grouped under the Common Weakness Enumeration (CWE) Base CWE-79. | ||||
| CVE-2026-103634 | 1 Apache | 1 Datasketches | 2026-10-22 | N/A |
| Out-of-bounds read and write in the Count-Min sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp). count_min_sketch::deserialize() did not include the preamble in its input size check, so a truncated sketch could cause a read of up to 16 bytes past the end of the input. In addition, the table size was computed from the serialized number of buckets and number of hash functions in 32-bit arithmetic. A crafted sketch could make it wrap to zero, so that the sketch deserialized with an empty table, and later updates and estimate queries read and wrote outside the heap allocation. This can corrupt heap memory, causing a crash and potentially enabling further exploitation. This issue affects Apache DataSketches C++: from 4.1.0 before 5.3.0. Only applications that deserialize Count-Min sketches from untrusted sources are affected. Users are recommended to upgrade to version 5.3.0, which fixes this issue. | ||||
| CVE-2026-20043 | 1 Cisco | 5 Cisco Open Source Snort3, Cisco Secure Firewall Threat Defense (ftd) Software, Cisco Utd Snort Ips Engine Software and 2 more | 2026-10-22 | 9 Critical |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20043 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787. | ||||
| CVE-2026-63886 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this. | ||||