Export limit exceeded: 413914 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25940 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25940 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98762 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: dwc2: shut down wakeup timer before freeing HCD state dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the wakeup timer. dwc2_hcd_free() currently deletes the timer only after freeing host-owned state, and timer_delete() does not synchronize a callback or prevent it from being queued again. Stop and shut down the timer in dwc2_hcd_release(), before the HCD resources are freed. This covers both the HCD initialization error path and normal HCD removal. | ||||
| CVE-2026-98830 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: validate MIB read length before copying to caller wfx_hif_read_mib() copies reply->length bytes from the firmware response into the caller-provided buffer without checking that reply->length does not exceed val_len. A firmware response with a length field larger than expected overruns the caller buffer and reads past the end of the reply allocation. Replace the dead -ENOMEM check with an active validation that reply->length fits within val_len before the memcpy. | ||||
| CVE-2026-63846 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef) | ||||
| CVE-2026-63848 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143) | ||||
| CVE-2026-63849 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63850 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) | ||||
| CVE-2026-63845 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a) | ||||
| CVE-2026-63844 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 2f6afc97d259d530f4f86c7743efbc573a8da927) | ||||
| CVE-2026-63843 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit f05d0a4f21fc720116d6e238f23308b199891058) | ||||
| CVE-2026-63842 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 0f43893d3cd478fa57836697525b338817c9c23d) | ||||
| CVE-2026-63841 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.1 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 742a98e2e81702df8fe1b1eccee5223220a03dc2) | ||||
| CVE-2026-63830 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting. | ||||
| CVE-2026-98121 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix NULL pointer dereference in PM callbacks msc313e_wdt_probe() doesn't set the driver data for the platform device. As a result, dev_get_drvdata() in msc313e_wdt_suspend() and msc313e_wdt_resume() will return NULL, leading to a NULL pointer dereference afterward. Set the platform device driver data in msc313e_wdt_probe(). | ||||
| CVE-2026-98122 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-98123 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and the watchdog reports a soft lockup. All reads stay within the received skb, so the lockup is a pure remote denial of service. A remote peer can trigger it with a crafted ASCONF-ACK on an ADD-IP enabled association with an outstanding ASCONF (RFC 5061 section 4.1.2 requires the chunk to be authenticated, but the predefined empty key id 0 allows the peer to compute the same association HMAC from publicly exchanged parameters, so the gate does not help). The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs no length check, letting a parameter without a complete error header reach the consumer, which reads errhdr.cause past the end of the parameter, an out-of-bounds read. Reject SCTP_PARAM_ERR_CAUSE parameters shorter than sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the verifier, and advance the consumer iterator with the same padding rule as the verifier to keep the two walks in lockstep. The verifier change guarantees a complete error header in every ERR_CAUSE parameter the consumer can see, so the consumer's asconf_ack_len check is dropped and it returns err_param->cause directly. The consumer padding fix is still required because odd lengths remain valid for SCTP_PARAM_ERR_CAUSE per RFC 5061. The issue was found by ZeroHive, a vulnerability hunting agent at Tencent Yunding Lab. | ||||
| CVE-2026-98124 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: invalidate fscache for fallocate range operations smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and smb3_collapse_range() modify file contents through server-side range operations. These operations discard the affected page cache, but leave the FS-Cache cookie valid, so a later read may return data cached before the range operation. Fix this by invalidating FS-Cache after outstanding I/O has completed and before modifying the file on the server. Run the following as root on a CIFS mount with fsc enabled and an active CacheFiles backend: bash -c ' MNT=/mnt/cifs FILE="$MNT/repro" # Generate four 1 MiB random blocks: [A][B][C][D]. dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none # Expected contents after zeroing B: [A][zero][C][D]. cp /tmp/src /tmp/expected dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \ conv=notrunc status=none cp /tmp/src "$FILE" # Populate FS-Cache, then discard the page cache. sync echo 1 > /proc/sys/vm/drop_caches cat "$FILE" > /dev/null sync echo 1 > /proc/sys/vm/drop_caches fallocate --zero-range -o 1M -l 1M "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Before this change, the readback differs from /tmp/expected: readback: STALE DATA After this change, it matches: readback: OK | ||||
| CVE-2026-98125 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix stale page cache in insert/collapse range smb3_insert_range() and smb3_collapse_range() use truncate_pagecache_range() to invalidate the affected page cache. However, if off or old_eof is not page-aligned, the boundary pages are only partially zeroed and remain uptodate. As a result, the client may return stale data after a successful insert/collapse range operation. For example, with 4K pages: page 0 page 1 page 2 0------4K 4K------8K 8K------12K ^ ^ off=2K old_eof=10K Page 1 is removed from the page cache, while the boundary pages are only partially zeroed. After COPYCHUNK moves the data on the server, these cached pages may still return stale data. This can be reproduced on a CIFS mount: bash -c ' FILE=/mnt/scratch/repro # Use a 6 KiB file so EOF is not page-aligned. dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none # Expected: a 4 KiB hole followed by the original data. rm -f /tmp/expected truncate -s 4K /tmp/expected cat /tmp/src >> /tmp/expected cp /tmp/src "$FILE" # Prime the page cache before moving data on the server. cat "$FILE" > /dev/null fallocate --insert-range -o 0 -l 4K "$FILE" if cmp -s /tmp/expected "$FILE"; then echo "readback: OK" else echo "readback: STALE DATA" fi ' Fix this by writing back dirty data and discarding the page cache from the start of the page containing off to EOF before moving data on the server. | ||||
| CVE-2026-98126 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for zero range When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE, smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing the file to grow beyond the caller's file-size limit. Fix this by calling inode_newsize_ok() before sending the zero-range request when the operation would extend EOF. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 truncate -s 2M "$FILE" fallocate --zero-range -o 0 -l 4M "$FILE" echo "fallocate rc=$?" stat -c "file size=%s" "$FILE" ' Before this change, the operation succeeds despite the 3 MiB limit: fallocate rc=0 file size=4194304 After this change, fallocate fails and leaves the file at 2 MiB. | ||||
| CVE-2026-63832 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib] | ||||