Export limit exceeded: 416339 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416339 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-118581 | 1 Mongodb | 1 Java Driver | 2026-10-28 | 6.5 Medium |
| A BSON encoding component of the MongoDB Java Driver does not verify that an externally supplied raw document's self-declared length agrees with the extent of the byte range it is given before that range is copied into an outgoing database command. An application that wraps untrusted raw bytes in such a document and uses it as part of a command can therefore emit a structurally inconsistent message, causing the database to interpret attacker-supplied trailing content as additional fields of the surrounding command. No authentication to the driver or database is required beyond the ability to influence those bytes through the victim application, and no user interaction is needed. The result is unintended modification of the command actually executed, which can alter the data read or written under the application's credentials. | ||||
| CVE-2026-82961 | 1 Zephyrproject | 1 Zephyr | 2026-10-28 | 7.8 High |
| The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it. The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash. The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines. | ||||
| CVE-2026-82962 | 1 Zephyrproject | 1 Zephyr | 2026-10-28 | 6.5 Medium |
| ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet TX allocations reserve that space: net_pkt_alloc_buffer() invokes the L2 alloc hook (ethernet_l2_alloc()) only when is_pkt_tx() is true and the packet's interface is the Ethernet interface. A packet that was allocated by a different L2 and then handed to Ethernet for transmission therefore has too little (usually zero) headroom. Such packets are produced by ordinary routing and tunnelling paths: net_route_packet_if() re-targets a received packet to another interface when CONFIG_NET_IPV4_FORWARDING / CONFIG_NET_IPV6_FORWARDING are enabled (for example an 802.15.4/OpenThread or PPP interface forwarding to Wi-Fi/Ethernet), net_route_ipv6_mcast_forward_packet() forwards an RX-slab clone that carries no reserve, and the IPIP tunnel interface_send() prepends an outer IP header allocated on the virtual interface. In these configurations a remote or adjacent attacker triggers the condition simply by sending traffic that the device forwards. Because net_buf_simple_push() only asserts on the headroom bound, a build without CONFIG_ASSERT (and without the newer CONFIG_NET_BUF_HARDENING) moves the fragment data pointer below the start of its data block and writes 14 bytes — 18 with VLAN — of Ethernet header out of bounds. With the default fixed-size buffer pools this overwrites the tail of the neighbouring buffer's payload or memory preceding the pool array; with variable-size pools it overwrites the buffer reference count and the heap chunk header. The attacker controls neither the written bytes nor the offset, so the practical impact is memory corruption leading to a crash, packet corruption, or heap inconsistency rather than controlled code execution. The fix takes the in-place path only when net_buf_headroom(pkt->buffer) is large enough and otherwise falls back to a separate header fragment. | ||||
| CVE-2026-79656 | 1 Grafana | 2 Grafana, Grafana Enterprise | 2026-10-28 | 6 Medium |
| A user with read access to Grafana's server logs, or to a log store they are shipped to, can recover the OAuth and OIDC access, refresh and ID tokens of users who sign in through the Generic OAuth, Google or GitLab providers. Grafana writes these tokens to its logs unredacted when an access or ID token is not a valid JWT, when the ID token is missing (at debug level) or is not a string (exposure of sensitive information in log files). The exposure is bounded by the scopes granted to the configured OAuth client. | ||||
| CVE-2026-83568 | 1 Microsoft | 10 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 7 more | 2026-10-28 | 7.8 High |
| Improper access control in Windows Kernel-Mode Drivers allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83567 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-28 | 7.8 High |
| Out-of-bounds read in Windows NTFS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83566 | 1 Microsoft | 10 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 7 more | 2026-10-28 | 7 High |
| Use after free in Windows Win32K - ICOMP allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83565 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-10-28 | 5.5 Medium |
| Buffer over-read in Windows Encrypting File System (EFS) allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-78674 | 1 Wso2 | 2 Business Process Server, Enterprise Integrator Bps Profile | 2026-10-28 | 8.8 High |
| The BPMN System REST APIs do not sufficiently validate input parameters, allowing authenticated users to submit crafted requests that can lead to the execution of arbitrary commands on the server. An authenticated user can leverage this vulnerability to execute arbitrary commands with the privileges of the product's runtime account. The scope of potential damage is contingent upon the permissions assigned to this account. | ||||
| CVE-2025-14260 | 1 Wso2 | 7 Saml2 Sso Authenticator Ui Bundle, Wso2 Api Manager, Wso2 Carbon Ui and 4 more | 2026-10-28 | 8.3 High |
| Due to the improper implementation of access control rules, the WSO2 product accepts user-supplied input related to resource location without enforcing expected validation constraints. This can be exploited by an unauthenticated actor to direct the server to make requests to arbitrary network locations. Exploiting this vulnerability allows a malicious actor to access both internal and external resources, available through the network or filesystem, that are reachable by the WSO2 product. This could potentially lead to unauthorized access to sensitive data and systems. | ||||
| CVE-2026-91347 | 1 Oracle | 1 Isupport | 2026-10-28 | 8.5 High |
| Vulnerability in the iSupport product of Oracle E-Business Suite (component: Service Requests). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise iSupport. While the vulnerability is in iSupport, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all iSupport accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of iSupport. CVSS 3.1 Base Score 8.5 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:L). | ||||
| CVE-2026-91340 | 1 Oracle | 1 Outside In Technology | 2026-10-28 | 8.8 High |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Clean Content SDK). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in takeover of Oracle Outside In Technology. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-91320 | 1 Oracle | 1 Jdeveloper | 2026-10-28 | 5.7 Medium |
| Vulnerability in the Oracle JDeveloper product of Oracle Fusion Middleware (component: Oracle JDeveloper). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle JDeveloper executes to compromise Oracle JDeveloper. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle JDeveloper accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle JDeveloper. CVSS 3.1 Base Score 5.7 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:H/A:H). | ||||
| CVE-2026-91318 | 1 Oracle | 1 Jdeveloper | 2026-10-28 | 6.5 Medium |
| Vulnerability in the Oracle JDeveloper product of Oracle Fusion Middleware (component: Security Framework). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle JDeveloper. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle JDeveloper accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-91317 | 1 Oracle | 1 Jdeveloper | 2026-10-28 | 5.9 Medium |
| Vulnerability in the Oracle JDeveloper product of Oracle Fusion Middleware (component: ADF Databinding). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via SOAP to compromise Oracle JDeveloper. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle JDeveloper accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle JDeveloper. CVSS 3.1 Base Score 5.9 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:L). | ||||
| CVE-2026-109411 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift, Samba | 2026-10-28 | 8.1 High |
| An access control bypass flaw was found in Samba's vfs_ceph_rgw module in it's openat() function. An authenticated user can bypass access controls to read or overwrite restricted files on shares configured with the experimental vfs_ceph_rgw module. When a client requests an existing file using mismatched character casing, the module fails to perform a case-insensitive lookup correctly, causing the server to treat the operation as creating a new file. As a result, the server skips standard permission checks on the existing file, allowing the attacker to access or overwrite sensitive data owned by other users. | ||||
| CVE-2026-118251 | 1 Highcharts | 1 Highcharts | 2026-10-28 | N/A |
| Highcharts JS is a JavaScript charting library based on SVG. Prior to 11.4.9, 12.6.1, and 13.1.0, Highcharts assigns credits.href to the window location when the credits label is clicked without checking the URL against the allowed-scheme list. An attacker who controls chart configuration can provide a javascript URL and run script in the origin of the hosting page when a user clicks the credits label. Highcharts Stock, Maps, and Gantt are included because they ship from the same package. This issue is fixed in 11.4.9, 12.6.1 and 13.1.0. | ||||
| CVE-2026-87374 | 2 Oracle, Oracle Corporation | 2 Webcenter Content, Oracle Webcenter Content | 2026-10-28 | 6.8 Medium |
| Vulnerability in the Oracle WebCenter Content product of Oracle Fusion Middleware (component: Content Server). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle WebCenter Content. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle WebCenter Content accessible data as well as unauthorized access to critical data or complete access to all Oracle WebCenter Content accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-87376 | 2 Oracle, Oracle Corporation | 3 Webcenter Content, Webcenter Content Imaging, Oracle Webcenter Content | 2026-10-28 | 6.8 Medium |
| Vulnerability in the WebCenter Content: Imaging product of Oracle Fusion Middleware (component: Core). The supported version that is affected is 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise WebCenter Content: Imaging. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all WebCenter Content: Imaging accessible data as well as unauthorized access to critical data or complete access to all WebCenter Content: Imaging accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-87380 | 1 Oracle | 1 Jd Edwards Enterpriseone Sales Order Entry | 2026-10-28 | 6.5 Medium |
| Vulnerability in the JD Edwards EnterpriseOne Sales Order Entry product of Oracle JD Edwards (component: Sales Order Entry). The supported version that is affected is 9.2. Easily exploitable vulnerability allows low privileged attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Sales Order Entry. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Sales Order Entry accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). | ||||