Export limit exceeded: 418560 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 10584 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10584 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63803 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a .detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a .detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown. Initialize the per-protocol timers in ppp_ioctl() when the protocol is attached, and remove the now-redundant timer_setup() from ppp_start(), so that the timers are initialized exactly once at attach time and ppp_timer_release() never operates on uninitialized timer_list structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so struct ppp's protos[i].timer is uninitialized garbage until the first timer_setup(); without this init-at-attach, attaching the PPP protocol without ever bringing the device up would leave timer_shutdown_sync() operating on uninitialized memory in .detach. Moving the init out of ppp_start() (which only runs on NETDEV_UP) into the attach path makes the initialization unconditional and avoids initializing the same timer_list twice. This bug was found by static analysis. | ||||
| CVE-2026-63797 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL. | ||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | ||||
| CVE-2026-16806 | 1 Google | 1 Chrome | 2026-07-24 | 8.8 High |
| Use after free in WebMCP in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-16804 | 1 Google | 1 Chrome | 2026-07-24 | 8.3 High |
| Use after free in Input in Google Chrome prior to 150.0.7871.186 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-55406 | 1 Anthropics | 1 Buffa | 2026-07-23 | N/A |
| Buffa is a pure-Rust Protocol Buffers implementation with first-class protobuf editions support. Prior to 0.7.0, a soundness bug in the OwnedView<V> type allowed safe Rust code to trigger a use-after-free: the OwnedView::decode constructor transmuted a borrowed slice to &'static [u8], and the Deref implementation exposed the promoted 'static lifetime on borrowed view fields (such as &'static str and &'static [u8]) to callers, so the borrow checker permitted those references to outlive the OwnedView; once the OwnedView was dropped and its backing buffer freed, the references became dangling, enabling memory corruption, information disclosure of freed heap contents, and cross-thread misuse without any unsafe code in the calling application. This issue is fixed in version 0.7.0. | ||||
| CVE-2026-16356 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.8 Critical |
| Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16353 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.8 Critical |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16352 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.8 Critical |
| Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16351 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.8 Critical |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16362 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 8.8 High |
| Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-60080 | 1 Apache | 1 Fory | 2026-07-22 | 7.3 High |
| Use After Free vulnerability in the Rust deserialization logic of Apache Fory. This issue affects Apache Fory from 0.13.0 through 1.3.0. A crafted Fory payload could cause undefined behavior, process crash, or potential memory disclosure. Users are recommended to upgrade to version 1.4.0, which fixes the issue. | ||||
| CVE-2023-3390 | 3 Linux, Netapp, Redhat | 12 Linux Kernel, H300s, H410c and 9 more | 2026-07-22 | 7.8 High |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 | ||||
| CVE-2024-30082 | 1 Microsoft | 23 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 20 more | 2026-07-20 | 7.8 High |
| Win32k Elevation of Privilege Vulnerability | ||||
| CVE-2024-30080 | 1 Microsoft | 22 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 19 more | 2026-07-20 | 9.8 Critical |
| Microsoft Message Queuing (MSMQ) Remote Code Execution Vulnerability | ||||
| CVE-2026-63800 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). | ||||
| CVE-2026-63795 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request. | ||||
| CVE-2026-63793 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize volume label accesses Protect vol->volume_label with a mutex and snaphost the label before copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it concurrently. | ||||
| CVE-2026-53389 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted. | ||||
| CVE-2026-53384 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. Unregister the port on the clk_notifier_register() error path. | ||||