Export limit exceeded: 93947 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93947 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-108491 | 2026-10-15 | 7.1 High | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Everest Forms Everest Forms everest-forms allows Stored XSS.This issue affects Everest Forms: from n/a through 3.6.1. | ||||
| CVE-2026-104618 | 2026-10-15 | 6.2 Medium | ||
| On request the `sdbootutil` script creates a world-readable debug log in /var/log/sdbootutil.log. The log file is created world-readable, however, which means that arbitrary low-privileged users in the system will be able to extract secrets from it. | ||||
| CVE-2026-91811 | 4 Apple, Foxit, Foxitsoftware and 1 more | 6 Macos, Pdf Editor, Pdf Reader and 3 more | 2026-10-15 | 7.8 High |
| A heap-based out-of-bounds write vulnerability exists in Foxit PDF Editor/Reader’s PRC parser due to insufficient validation of vertex indices in triangular fan texture meshes. Successful exploitation could result in memory corruption and an application crash. | ||||
| CVE-2026-108935 | 1 Edimax | 2 Br-6208ac, Br-6208ac Firmware | 2026-10-15 | 2.4 Low |
| A weakness has been identified in Edimax BR-6208AC 1.32. Affected by this issue is some unknown functionality of the file /goform/formPortFw of the component Port Forwarding Page. Executing a manipulation can lead to cross site scripting. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-53362 | 2 Linux, Siemens | 3 Linux Kernel, Simatic S7-1500 Tm Mfp, Simatic S7-1500 Tm Mfp Firmware | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | ||||
| CVE-2026-105882 | 2026-10-15 | 6.5 Medium | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeGrill User Registration user-registration allows Stored XSS.This issue affects User Registration: from n/a through 5.2.8. | ||||
| CVE-2026-98057 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect. | ||||
| CVE-2026-93164 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/ [2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t | ||||
| CVE-2026-92409 | 2026-10-15 | 6.8 Medium | ||
| The Donation Thermometer WordPress plugin before 2.3.0 does not escape a colour value taken from a shortcode attribute before using it in an attribute of the generated legend markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when the page is viewed. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90082 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Cap MSI-X vectors to the device MSI-X table size mana_gd_query_max_resources() sizes gc->num_msix_usable from resp.max_msix and the CPU count, but never from the device MSI-X table. On a 1792 vCPU M-series VM that yields 1793 while the table has 1024 entries, and mana_gd_setup_remaining_irqs() then walks indices 1..1792, running off the end of the region mapped by msix_map_region(): BUG: unable to handle page fault for address: ff8e347f8b99800c RIP: 0010:msix_prepare_msi_desc+0x7a/0x90 RAX: 0000000000004000 RBX: ff4330cb164ea780 RCX: ff8e347f8b998000 Call Trace: <TASK> __msi_domain_alloc_irqs+0x13a/0x440 msi_domain_alloc_irq_at+0x149/0x1b0 mana_gd_setup+0x351/0x890 mana_gd_probe+0x274/0x390 </TASK> RAX is index 1024 * PCI_MSIX_ENTRY_SIZE, one entry past the table. msi_insert_desc() does range check the index, but only against the MSI domain hwsize, which matches the table only for devices on an MSI parent domain. With a global PCI/MSI domain hwsize is MSI_XA_DOMAIN_SIZE, so nothing bounds the request. Cap num_msix_usable with pci_msix_vec_count(). | ||||
| CVE-2026-89907 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it. | ||||
| CVE-2026-89513 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events. | ||||
| CVE-2026-72370 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: release pages on atomic dio size mismatch If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a short bio, the REQ_ATOMIC size check rejects it before submission. The old error path only dropped the bio reference, leaving any pages already attached to the bio unreleased. Release or unbounce the pages before falling through to out_put_bio on this error path. This bug was reported by sashiko: https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com | ||||
| CVE-2026-64020 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion. | ||||
| CVE-2026-64019 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix dma mapping leak on data setup error We're leaking the initial DMA mapping during iteration if we fail to allocate the tracking descriptor for both PRP and SGL. Unmap the iterator directly; we can't use the existing unmap helper because it depends on the tracking descriptor being successfully allocated, so a new one for an in-use iterator is provided. The mappings were also leaking when the driver detects an invalid bio_vec when mapping PRPs, so fix that too. | ||||
| CVE-2026-64013 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: button: Fix ACPI GPE handler leak during removal Commit a7e23ec17fee ("ACPI: button: Install notifier for system events as well") changed the ACPI notify handler type for ACPI buttons to ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect that change. This leads to leaking the notify handler past driver removal, which may cause a kernel crash to occur if ACPI notify on the given device is triggered after removing the driver, and causes a subsequent probe of the given device with the same driver to fail. Address this by updating the acpi_remove_notify_handler() call in acpi_button_remove() as appropriate. | ||||
| CVE-2026-106469 | 2026-10-15 | 6.8 Medium | ||
| The Gutenverse Form WordPress plugin before 3.0.11 does not sanitize SVG icon markup stored in its form blocks before it is decoded and inserted into the page in the browser, allowing authenticated users with Contributor-level access and above to store malicious SVG that executes JavaScript in the session of any user who views or previews the affected form, such as an administrator reviewing a pending post. | ||||
| CVE-2026-39781 | 2 Dan Rossiter, Wordpress-extensions | 2 Document Gallery, Document Gallery | 2026-10-15 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Dan Rossiter Document Gallery document-gallery allows Reflected XSS.This issue affects Document Gallery: from n/a through 5.1.1. | ||||
| CVE-2026-94377 | 2026-10-15 | 7.2 High | ||
| The Verified Reviews (Avis Vérifiés) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'moderation' parameter in all versions up to, and including, 2.4.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The authentication bypass is possible because ntav_check_data() uses loose != comparisons for signature verification, allowing a JSON body with boolean true values for idWebsite and sign to pass all checks on any configured installation. | ||||