Export limit exceeded: 25722 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25722 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98745 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems When system_supports_sme() is true but system_supports_sve() is false, restoring a specifically crafted SVE signal context can result in the task erroneously having non-streaming SVE state. Subsequent attempts to manipulate the task's FPSIMD/SVE/SME state can result in a variety of problems, including fatal EL1 UNDEFs. In such configurations, the kernel always creates an SVE signal context when delivering a signal, and this can only be in one of two states: (1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing streaming mode SVE state. The recorded VL is the task's live streaming VL. (2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The FPSIMD context contains the non-streaming mode FPSIMD state. The recorded VL is 0. Currently restore_sve_fpsimd_context() correctly rejects cases where SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is present. Consequently, restore_sve_fpsimd_context() can place the task in a state where it has non-streaming SVE state even when this is not supported by HW. For example, this can cause a later EL1 UNDEF when the kernel attempts to restore the task's ZCR_EL1 value: | # ./sme-sigcontext-to-sve | Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : fpsimd_restore_current_state+0x258/0x458 | lr : exit_to_user_mode_loop+0xb8/0x188 | sp : ffff80008056be40 | x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040 | x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000 | x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0 | x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300 | x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401 | x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002 | x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001 | x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000 | Call trace: | fpsimd_restore_current_state+0x258/0x458 (P) | exit_to_user_mode_loop+0xb8/0x188 | el0_svc+0x1cc/0x1d0 | el0t_64_sync_handler+0xa0/0xe4 | el0t_64_sync+0x198/0x19c | Code: d5384101 f9400020 53175c03 36b80de0 (d5381202) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt | Kernel Offset: 0x291fb1000000 from 0xffff800080000000 | PHYS_OFFSET: 0x40000000 | CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f | Memory Limit: none Rework restore_sve_fpsimd_context() to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME are supported, it isn't necessary for restore_sve_fpsimd_context() to handle the case where neither are supported. | ||||
| CVE-2026-98744 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: max98363: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. | ||||
| CVE-2026-98743 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic. | ||||
| CVE-2026-98742 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize compat port-info ioctls The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and access a freed subscriber. Take ioctl_mutex while dispatching converted port-info requests, matching the native ioctl path. All translated port-info commands share this helper, so their accesses to the client port state are serialized as well. | ||||
| CVE-2026-98741 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ua101: reject mismatched capture/playback packet sizes detect_usb_format() cross-checks bSubframeSize, bBitResolution and tSamFreq between the capture and playback interfaces, but never relates the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB gets a buffer of ua->playback.max_packet_bytes, while the number of bytes written into it is derived from the capture stream: capture_urb_complete() computes frames from the received capture packet and capture.frame_bytes, and start_usb_playback() and playback_work() multiply that by playback.frame_bytes. A device declaring a large capture wMaxPacketSize with few capture channels and a small playback wMaxPacketSize with many playback channels therefore memset()s and memcpy()s past the end of the playback buffer, in open() of the PCM node the driver registers during probe. usb_submit_urb() rejects the over-long iso_frame_desc[0].length with -EMSGSIZE, but only after the write. Reject such descriptors at probe time. Genuine UA-101/UA-1000 hardware declares proportional packet sizes and is unaffected. BUG: KASAN: slab-out-of-bounds in start_usb_playback (sound/usb/misc/ua101.c:586) Write of size 2048 at addr ffff8881098f3c00 by task exploit/5021 Call Trace: __asan_memset (mm/kasan/shadow.c:84) start_usb_playback (sound/usb/misc/ua101.c:586) playback_pcm_open (sound/usb/misc/ua101.c:679) snd_pcm_open_substream (sound/core/pcm_native.c:2829) snd_pcm_open (sound/core/pcm_native.c:2865 sound/core/pcm_native.c:2932) snd_pcm_playback_open (sound/core/pcm_native.c:2891) snd_open (sound/core/sound.c:166) chrdev_open (fs/char_dev.c:411) do_dentry_open (fs/open.c:996) vfs_open (fs/open.c:1101) path_openat (fs/namei.c:4837 fs/namei.c:5000) do_file_open (fs/namei.c:5029) do_sys_openat2 (fs/open.c:1417) __x64_sys_openat (fs/open.c:1423 fs/open.c:1439 fs/open.c:1434) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the object at ffff8881098f3c00 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 0 bytes inside of allocated 168-byte region [ffff8881098f3c00, ffff8881098f3ca8) | ||||
| CVE-2026-98739 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 88: rfcomm_dev_ioctl+0x8f6/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Freed by task 65: kfree+0x131/0x3c0 rfcomm_dev_destruct+0x23b/0x2f0 release_one_tty+0xc1/0x370 process_one_work+0x661/0x1090 Use test_and_set_bit() in both paths so that only the caller that changes RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path keeps its own lookup reference until release or TTY cleanup, preserving the existing callback ordering and error handling. | ||||
| CVE-2026-98738 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior. | ||||
| CVE-2026-98737 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->req_lock, but inquiry-cache updates and flushes use hdev->lock. Both hci_acl_create_conn_sync() and hci_stop_discovery_sync() look up entries and read their fields without taking hdev->lock. After either lookup returns, a concurrent HCIINQUIRY ioctl can acquire hdev->lock and flush the cache, freeing the entry. The worker then reads the freed entry while preparing a create-connection or remote-name-cancel command. The list traversal also races with cache updates and removal. KASAN reported these accesses: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5f1/0x650 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_acl_create_conn_sync+0x5f1/0x650 hci_cmd_sync_work+0x13c/0x290 Allocated by task 90: hci_inquiry_cache_update+0x3e6/0x7d0 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 93: hci_inquiry_cache_flush+0x111/0x2b0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 BUG: KASAN: slab-use-after-free in hci_stop_discovery_sync+0x3b1/0x3c0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_stop_discovery_sync+0x3b1/0x3c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 86: hci_inquiry_cache_update+0x483/0x940 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 91: hci_inquiry_cache_flush+0x13e/0x2f0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 Hold hdev->lock across each lookup and all reads from its result. Copy the remote address before unlocking so discovery cancellation does not retain a cache entry pointer. Release the lock before sending synchronous HCI commands, since their completion handlers may need the same lock. | ||||
| CVE-2026-98736 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the SCO setup context lifetime") protects the child stored in the queued context, but leaves these parent accesses unprotected. With a 40 ms diagnostic delay after loading conn->parent, an instrumented kernel based on fd179f8a05be, which already contains 42de40abe25d, BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0 Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93 Call Trace: hci_enhanced_setup_sync+0xda5/0xdf0 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x6b4/0x10e0 Allocated by task 92: __hci_conn_add+0x304/0x1df0 hci_connect_acl+0x349/0x3e0 hci_connect_sco+0x3b/0x9a0 sco_sock_connect+0x475/0xca0 Freed by task 94: kfree+0x121/0x3c0 bt_link_release+0x79/0xa0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x524/0xe30 hci_disconn_complete_evt+0x403/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 The accessed address is 71 bytes into the freed ACL parent, at its features[0][3] byte; the queued SCO child is a different object. The diagnostic preserves the loaded parent across the delay, matching the unmodified compiled capability check, and does not change the parent references or teardown path. Hold hci_dev_lock() across the codec switch, including every call to find_next_esco_param(), and release it on all selection errors. Keep configure_datapath_sync() outside the critical section because it waits for HCI events. Preserve parameter selection and existing return values. | ||||
| CVE-2026-98735 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission. | ||||
| CVE-2026-98733 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl() does, to serialize insertion against dequeue while preserving fragment ordering. | ||||
| CVE-2026-98732 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98696 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. | ||||
| CVE-2026-98662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review. | ||||
| CVE-2026-98549 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. | ||||
| CVE-2026-98544 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98517 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated--- | ||||