Export limit exceeded: 93880 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93880 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98641 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: set up the frame pointer for the exception callback A program acting as exception boundary saves all callee-saved registers, so build_prologue() takes the exception_cb path and never calls push_callee_regs(). That is the only place find_used_callee_regs() runs, and with it the only place ctx->fp_used is set, so the callback prologue does not emit the mov x25, sp that points BPF_REG_FP at the frame the callback runs on. x25 keeps whatever it held when bpf_throw() was called. If the throw came from a subprogram that uses its own BPF stack, that is the subprogram's frame pointer, and since the subprogram never returns it never restores x25 either. Stack accesses through BPF_REG_FP are rewritten to be stack pointer relative, so those still land in the callback's own frame. Materializing the register does not: a callback that passes the address of a local variable to a helper hands over an address in the dead subprogram's frame. That address is below the callback's stack pointer by then, and the helper's own call chain covers it, so the helper can write over its own return address. 0x1234 below is the value the helper was asked to store: pc : 0x1234 lr : 0x1234 Call trace: 0x1234 (P) bpf_test_run+0x188/0x3e0 bpf_prog_test_run_skb+0x47c/0x998 __sys_bpf+0xbdc/0xdd8 Kernel panic - not syncing: Oops: Fatal exception in interrupt Set ctx->fp_used on the exception callback path so that the existing code further down sets x25 from the stack pointer. The epilogue restores it from the main program's save area along with the other callee-saved registers, as it already does. x86 sets the frame pointer for the callback from the argument it is passed, and powerpc computes it from the stack pointer. | ||||
| CVE-2026-100161 | 2 Villatheme, Wordpress-extensions | 2 Photo Reviews For Woocommerce, Photo Reviews For Woocommerce | 2026-10-19 | 7.2 High |
| The Photo Reviews for WooCommerce plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'wcpr_image_upload_id' parameter in all versions up to, and including, 1.2.30 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The publicly-emitted `wcpr_image_upload` nonce printed on every product review form is the only gate, and no capability, authentication, or attachment ownership check is performed, allowing the payload to be stored in comment meta — which is not subject to `wp_kses` — by any unauthenticated visitor; the XSS fires once the review is visible on the frontend. | ||||
| CVE-2026-98633 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP without freeing its skb argument. This leaks the cloned skb and also prevents nxp_set_ind_reset() from being called to perform recovery. Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC)) call with IS_ENABLED(CONFIG_DEV_COREDUMP). | ||||
| CVE-2026-98630 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Fix payload page pool error cleanup The payload page pool pointer contains an error pointer when its allocation fails. The cleanup path passes that error pointer to page_pool_destroy() instead of destroying the header page pool. This can dereference the error pointer and leave the header page pool allocated. Destroy the header page pool instead. | ||||
| CVE-2026-98610 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget hfsc_classify() applies the "filter may only point downwards" level check only when the filter result carries no bound class. A filter created with a flowid gets res.class set once at bind time, so the check never runs for it during classification. hfsc_adjust_levels() can later raise a class's level without revalidating existing bindings, leaving two binds that were each legal at bind time pointing at each other; the classify walk then bounces between two interior classes forever with the qdisc lock held and BH disabled — a soft lockup from a single packet. The stuck walk trips the watchdog: watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444] RIP: 0010:u32_classify+0x542/0x17f0 ... tcf_classify+0x66/0xa0 hfsc_enqueue+0x166/0xdf0 Bound the traversal with a budget of non-descending hops, the only way a configured walk can move without descending the class tree once levels drift after bind time. The budget is cumulative over the whole walk and is deliberately not reset on a descending hop: a chain that alternates a descent with a lateral hop would return the budget every lap and never trip. Descending hops never decrement it, so legitimately deep trees are unaffected and a terminating lateral chain still classifies normally. Drop the packet with a rate-limited warning once the budget is exhausted, mirroring the merged HTB fix. This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit htb_classify inner-class filter hops"), which bounded the same classify loop on the HTB side but left the HFSC walk unbounded. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32, CONFIG_LOCKUP_DETECTOR. - Build a cycle with two legal-at-bind-time flowid binds and a level drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2 (sibling of X) with children 1:20 and 1:200; root u32 filter flowid 1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping on the device). Unfixed kernel: classify spins with the qdisc lock held; with softlockup_panic=1 it panics. - Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). | ||||
| CVE-2026-98608 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl() virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the drm_gem_handle_create() error path instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, its pages and sg table, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98598 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is called while the target fib6_info is being removed via fib6_purge_rt(), a new exception could be created successfully because rt6_flush_exceptions() no longer sets the bit. This creates a reference cycle between the fib6_info and the exception route, leaking the fib6_info, its nexthop device, and all per-CPU routes in fib6_nh->rt6i_pcpu, which stalls netdev unregistration. [ 34.680602] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 44.920675] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 55.176582] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 Let's call fib6_drop_pcpu_from() before rt6_flush_exceptions(), to set fib6_destroying before rt6_exception_lock, and check f6i->fib6_destroying in rt6_insert_exception(). Note that FIB6_EXCEPTION_BUCKET_FLUSHED logic is dead and we can clean it up in net-next. | ||||
| CVE-2026-98572 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||
| CVE-2026-98560 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it. | ||||
| CVE-2026-98558 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown. | ||||
| CVE-2026-98535 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix clk reference leak in read_dts_node() of_clk_get() returns a clock with its reference count incremented, but read_dts_node() only uses it to read the rate and never calls clk_put(). The clock is not stored anywhere, so the reference cannot be released later either. Release the clock once its rate has been read, which also covers the error path taken when the rate is zero. | ||||
| CVE-2026-98498 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get() When the reverse entry is found but its counter is already being released, refcount_inc_not_zero() fails and the reference taken by mlx5_tc_ct_entry_get() is never dropped before falling through to create_counter. Drop it so the reverse entry is not kept alive forever by a shared counter lookup that did not use it. | ||||
| CVE-2026-98447 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots LOLLM noticed that the inode btree root formatting methods copy too many bytes -- there's only one set of keys in node blocks, not two. This causes memory corruption of whatever's beyond the buffers. | ||||
| CVE-2026-98445 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away. | ||||
| CVE-2026-98433 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system. | ||||
| CVE-2026-112100 | 1 Deeppavlov | 1 Deeppavlov | 2026-10-19 | 5.5 Medium |
| A vulnerability was determined in DeepPavlov up to 1.7.0. This affects the function MultiTaskPipelinePreprocessor.__init__ of the file deeppavlov/models/preprocessors/multitask_preprocessor.py. This manipulation of the argument preprocessor causes code injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-103427 | 2 Wordpress-extensions, Wpinsider-1 | 2 Simple Membership, Simple Membership | 2026-10-19 | 6.4 Medium |
| The Simple Membership plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'country' parameter in all versions up to, and including, 4.8.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Unauthenticated attackers may also exploit this vulnerability when the plugin's Enable Free Membership feature is turned on, as it permits anonymous front-end registration and profile submission. | ||||
| CVE-2026-103912 | 2 Jetmonsters, Wordpress-extensions | 2 Jetformbuilder, Jetformbuilder | 2026-10-19 | 4.7 Medium |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected DOM-Based Cross-Site Scripting via the '<attacker-chosen query var name matching the preset's query_var setting>' parameter in all versions up to, and including, 3.6.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This is only exploitable on pages embedding a form that has a text field configured with a query_var Dynamic Preset and a data-jfb-macro or JFB_FIELD:: macro reference targeting that field, both of which are standard, documented plugin features. | ||||
| CVE-2026-112087 | 1 Itsourcecode | 1 Online Cake Ordering System | 2026-10-19 | 6.3 Medium |
| A weakness has been identified in itsourcecode Online Cake Ordering System 1.0. This issue affects some unknown processing of the file confirm.php. This manipulation of the argument cancel causes sql injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. | ||||