Export limit exceeded: 15988 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 46018 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46018 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74480 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | ||||
| CVE-2026-74474 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. | ||||
| CVE-2026-74471 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | ||||
| CVE-2026-74465 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. | ||||
| CVE-2026-74450 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) | ||||
| CVE-2026-74436 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: serialize kernel accept preallocation with socket teardown rxrpc_kernel_charge_accept() reads rx->backlog without any socket/backlog synchronization and passes that raw pointer into rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc() sets rx->backlog = NULL and frees the backlog rings, so a kernel preallocation worker can keep using a freed struct rxrpc_backlog while updating *_backlog_head/tail and array slots. Serialize the state check and backlog lookup with the socket lock, and reject kernel preallocation once teardown has disabled listening or discarded the service backlog. | ||||
| CVE-2026-74413 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix. | ||||
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-111652 | 1 Engineercms Project | 1 Engineercms | 2026-10-16 | 5.3 Medium |
| Engineercms through 2.0.5 contains a missing authorization vulnerability in AttachController.Attachment that allows unauthenticated attackers to download project image and video attachments. Attackers can request known or derived /attachment/* paths for .jpg, .png, .bmp, or .mp4 files, which are served before casbin, owner, or admin checks. | ||||
| CVE-2025-71433 | 1 Usekaneo | 1 Kaneo | 2026-10-16 | 7.5 High |
| Kaneo before 2.1.6 contains a missing authorization vulnerability that allows authenticated users to access other workspaces by supplying project, task, label or workspace identifiers to API routes lacking membership checks. Attackers who obtain identifiers, for example from shared project links, can read projects and tasks, modify or delete tasks, labels and comments, and search workspace contents. | ||||
| CVE-2026-105973 | 2026-10-16 | 4.3 Medium | ||
| The Visual Form Builder WordPress plugin through 3.1 does not perform authorization or nonce checks when reordering form fields, allowing any authenticated user (Subscriber and above) to alter the field structure of any form on the site, persistently breaking its public rendering. | ||||
| CVE-2026-109982 | 2026-10-16 | 4.2 Medium | ||
| The MB Custom Post Types & Custom Taxonomies WordPress plugin before 2.12.2 does not perform a capability check or validate a nonce on its migration actions, allowing any authenticated user, such as a subscriber, to trigger a one-way migration that creates published records and permanently deletes a companion MB Custom Post Types & Custom Taxonomies WordPress plugin before 2.12.2's entire post-type and taxonomy configuration. | ||||
| CVE-2026-110039 | 2026-10-16 | 2.7 Low | ||
| The Smush WordPress plugin before 4.3.4 does not restrict changes to a network-wide access setting to network administrators, allowing an administrator of a single site on a multisite network to change it for the entire network. | ||||
| CVE-2026-110453 | 1 Nixos | 1 Nix | 2026-10-16 | 4.3 Medium |
| Nix before 2.35.3, when unsandboxed on macOS or FreeBSD, incorrectly allows connections made by build users from daemon clients. | ||||
| CVE-2026-111581 | 1 Redhat | 1 Enterprise Linux | 2026-10-16 | 3.3 Low |
| A flaw was found in libblockdev. The bd_fs_ntfs_set_label() and bd_fs_vfat_set_label() functions pass caller-supplied label values as bare positional arguments to the ntfslabel and fatlabel utilities without end-of-options separators or input validation for values beginning with a dash. This allows a label starting with '-' to be interpreted as a command-line flag by the spawned tool, potentially bypassing safety checks or causing unintended operations. This is reachable by unprivileged local users through the udisks2 Filesystem.SetLabel() D-Bus method without administrator authentication. | ||||
| CVE-2026-78335 | 1 Gitlab | 1 Gitlab | 2026-10-16 | 4.2 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.1 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an authenticated user holding a project-scoped fine-grained Personal Access Token to modify integrations belonging to a group outside the token's scope, due to incorrect authorization checks. | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74277 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length of the current scatterlist segment `s` is incorrectly assigned from the head entry `sg->length` instead of the current entry `s->length`. This typo causes all P2PDMA segments in the scatterlist to inherit the length of the first segment, leading to corrupted DMA lengths for multi- segment scatterlists. Fix this by using `s->length` instead of `sg->length`. | ||||
| CVE-2026-72476 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check. | ||||