Export limit exceeded: 11555 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11555 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98859 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags)) Simply moving the teardown after hid_hw_stop() does not fix this on its own, because mt_expired_timeout() calls mt_release_contacts(), which walks hdev->inputs; the timer still has to be quiesced before hid_hw_stop() tears the input devices down. Use timer_shutdown_sync() instead, which additionally makes any later mod_timer() a no-op, so neither ordering constraint has to be traded off against the other. This is the final-teardown pattern the function was introduced for, and hid-wiimote already uses it for the same reason. | ||||
| CVE-2026-98855 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. | ||||
| CVE-2026-98852 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones. | ||||
| CVE-2026-98846 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | ||||
| CVE-2026-98840 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated(). | ||||
| CVE-2026-98837 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: unregister the input device when probe fails setup_card() registers the input device, whose name and phys point into struct snd_usb_caiaqdev, and then goes on to snd_card_register() and snd_usb_caiaq_control_init(). If either fails, snd_probe() calls snd_card_free(), which frees the device state but leaves the input device registered: card_free() only clears the pointer, and the input device is unregistered from snd_disconnect() alone. Reading its "uevent" attribute afterwards dereferences freed memory: BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0 Read of size 1 at addr ffff8880208f5043 by task caiaq/4967 add_uevent_var+0x183/0x3a0 input_dev_uevent+0x162/0x900 dev_uevent+0x2f1/0x870 uevent_show+0x1ca/0x3a0 ... Unregister the input device on the probe error path, as snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when no input device was registered. Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that makes snd_usb_caiaq_control_init() fail. | ||||
| CVE-2026-98823 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: preserve hidden-group beacon IE ownership A hidden-group probe-response entry borrows its beacon IEs from the group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such an entry to cfg80211_update_known_bss() when merging scan entries after a channel switch. Copying the borrowed beacon_ies into the associated entry gives the same allocation two owners. Releasing the group's beacon entry can then leave the associated entry pointing to freed IEs, which are freed again when that entry is released. Skip beacon IE replacement when the source entry belongs to a hidden group. Preserve probe-response processing, the subsequent metadata updates, and the existing rejection path for conflicting hidden beacon updates. | ||||
| CVE-2026-98768 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: anx7411 - stop the IRQ before destroying the workqueue The IRQ is devm-managed, so it can still queue plat->work while remove() is tearing the queue down. Disable it first. | ||||
| CVE-2026-98750 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: fix saved termios reset race Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is reset on registration and only set it for drivers that make sure that the minor number is no longer in use. | ||||
| CVE-2026-98749 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: max3100: shut down timer before freeing port max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer. The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown. Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98748 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout quirk of the 8250 core when hardware flow control is enabled; the timer callback brcmuart_hrtimer_func() dereferences priv. brcmuart_remove() cancels the hrtimer before it unregisters the port, so a receive-timeout interrupt that arrives in between re-arms the timer. After devm frees priv, the callback runs on freed memory. Unregister the port before cancelling the hrtimer. serial8250_unregister_port() shuts the port down and frees its IRQ, so brcmuart_handle_irq() can no longer restart the timer, and the final hrtimer_cancel() drains any timer that was armed before or during the unregister. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98742 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize compat port-info ioctls The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and access a freed subscriber. Take ioctl_mutex while dispatching converted port-info requests, matching the native ioctl path. All translated port-info commands share this helper, so their accesses to the client port state are serialized as well. | ||||
| CVE-2026-98738 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a per-device remote_oob_lock instead, held across the SMP lookup and copies and by the add, remove and clear helpers. Cover initialization and in-place updates as well, so SMP cannot read partially initialized or updated OOB values. Release the mutex on allocation failure, preserving the existing error return. The new critical sections acquire no device, connection or channel locks. Writers retain their existing hdev->lock protection, which continues to serialize the other readers without changing their locking or behavior. | ||||
| CVE-2026-98737 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->req_lock, but inquiry-cache updates and flushes use hdev->lock. Both hci_acl_create_conn_sync() and hci_stop_discovery_sync() look up entries and read their fields without taking hdev->lock. After either lookup returns, a concurrent HCIINQUIRY ioctl can acquire hdev->lock and flush the cache, freeing the entry. The worker then reads the freed entry while preparing a create-connection or remote-name-cancel command. The list traversal also races with cache updates and removal. KASAN reported these accesses: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5f1/0x650 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_acl_create_conn_sync+0x5f1/0x650 hci_cmd_sync_work+0x13c/0x290 Allocated by task 90: hci_inquiry_cache_update+0x3e6/0x7d0 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 93: hci_inquiry_cache_flush+0x111/0x2b0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 BUG: KASAN: slab-use-after-free in hci_stop_discovery_sync+0x3b1/0x3c0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_stop_discovery_sync+0x3b1/0x3c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 86: hci_inquiry_cache_update+0x483/0x940 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 91: hci_inquiry_cache_flush+0x13e/0x2f0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 Hold hdev->lock across each lookup and all reads from its result. Copy the remote address before unlocking so discovery cancellation does not retain a cache entry pointer. Release the lock before sending synchronous HCI commands, since their completion handlers may need the same lock. | ||||
| CVE-2026-98733 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl() does, to serialize insertion against dequeue while preserving fragment ordering. | ||||
| CVE-2026-98708 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. | ||||
| CVE-2026-98696 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. | ||||
| CVE-2026-98662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review. | ||||
| CVE-2026-98517 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated--- | ||||
| CVE-2026-98099 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcast.c update RCU-protected lists (np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer assignments instead of rcu_assign_pointer(): 1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did: *map = ma->next; without rcu_assign_pointer() while concurrent readers traverse idev->mc_list locklessly under rcu_read_lock(). 2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing with lockless readers in inet6_mc_check(). 3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to np->ipv6_mc_list via raw assignment before publishing mc_lst. 4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers passed into rcu_assign_pointer() lacked explicit dereference helpers. Fix these by consistently using rcu_assign_pointer() along with mc_dereference() / sock_dereference(). | ||||