| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Verification of Cryptographic Signature vulnerability in Drupal SAML SSO - Service Provider allows Signature Spoof. This issue affects SAML SSO - Service Provider versions: from 0.0.0 to 3.2.0. |
| A Unsigned Firmware vulnerability exists in the boa Firmware Update functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted firmware binary can lead to arbitrary firmware update. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| webpack-dev-server is a development server that provides live reloading for webpack projects. In versions before 5.2.7 and in version 6.0.0, when a proxy entry is configured to forward WebSockets, the server forwards non-HMR WebSocket upgrade requests to the proxy target without validating the Host or Origin headers, so the allowedHosts protection does not apply to those proxied upgrades. A malicious web page visited by a developer can open a cross-origin WebSocket through the dev server and read from and write to the proxied backend, even when the server is bound to loopback. The issue is fixed in webpack-dev-server 5.2.7 and 6.1.0, where proxied WebSocket upgrades pass the same Host and Origin validation as the HMR WebSocket, and users should upgrade to one of those versions or later. As a workaround, omit WebSocket forwarding from proxy entries that do not need it and scope the proxy to specific paths. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, hid and usb permission checks made from an iframe caused setPermissionCheckHandler to receive the top-level frame's origin and details instead of the requesting frame's. An application that delegated hid or usb to a cross-origin untrusted iframe and allowed device access with origin-based logic could therefore grant that embedded frame access intended for the top-level page. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5. |
| The LatePoint WordPress plugin before 5.7.5 does not validate the client-supplied value that determines how much is charged for a booking against the amounts the service and site actually allow, allowing an unauthenticated visitor to make the amount due resolve to zero and obtain a confirmed appointment and a recorded order without completing any payment. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5, requests to open external protocol URLs could be attributed to a document other than the one that initiated them, causing the requestingUrl passed to session.setPermissionRequestHandler to identify trusted content for a launch requested by untrusted content. An application that grants openExternal based on the requesting origin and allows untrusted content to open or navigate windows could therefore allow that content to launch an OS-registered external application. This issue is fixed in versions 42.11.3, 43.7.0, 44.3.0, and 45.0.0-alpha.5. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. From 8.0.0 until 8.6.19, 9.1.21, 10.6.2, and 11.0.0-alpha.6, a malicious website can interact with the preview of a running Storybook development server. Insufficient iframe embedding and message-origin restrictions can allow attacker-controlled events to reach the running preview. A developer must visit the malicious website and interact with the injected interface. The attack can cause unauthorized changes to story files and, if a changed file is later executed by a local runtime, arbitrary code execution with the developer's privileges. This issue is fixed in 8.6.19, 9.1.21, 10.6.2, and 11.0.0-alpha.6. |
| Apache Pulsar's MultiRolesTokenAuthorizationProvider authorizes a client with all roles listed in a claim of its JSON Web Token (JWT). The provider is intended for use with token authentication, which verifies the token before authorization. The provider did not verify the token itself: it parsed the token's claims with the signature removed and trusted that authentication had already checked it.
When authentication and authorization are enabled with a non-empty anonymousUserRole setting, some HTTP requests whose credentials fail authentication are not rejected, but are handled as requests of the anonymous user role. For the broker's HTTP endpoints, such as the admin REST API, this fallback applies to requests that do not name an authentication method and requires strictAuthMethod to be false (the default) where that setting is available. For the WebSocket API, failed credentials can also fall back to the anonymous user role; this path does not enforce strictAuthMethod. The authentication data kept for such a request still contained the request's Authorization header. MultiRolesTokenAuthorizationProvider then read the bearer token from that header without verifying its signature and authorized the request with the roles in the token's role claim.
As a result, in deployments that use MultiRolesTokenAuthorizationProvider together with a non-empty anonymousUserRole and that permit this fallback, an unauthenticated client can send an HTTP request, for example to the admin REST API or the WebSocket API, with a forged or unsigned token that lists arbitrary roles, and be authorized with those roles. The impact can include super-user access when the token lists a role configured in superUserRoles, allowing the client to read and change tenants, namespaces, topics, permissions and broker configuration. No valid credentials are required.
Deployments are not affected if they use the default authorization provider (PulsarAuthorizationProvider) or another authorization provider, or if anonymousUserRole is not set (the default). Requests that authenticate successfully with a valid token are not affected, because the token that MultiRolesTokenAuthorizationProvider reads is the token that authentication verified. Connections that use the Pulsar binary protocol are not affected by this issue, because the broker does not keep client authentication data for connections that it assigns to the anonymous user role.
In fixed versions, MultiRolesTokenAuthorizationProvider obtains roles only from tokens that the configured token authentication provider has verified, using its configured keys and validation settings. Broker HTTP requests that are assigned to the anonymous user role are authorized only as that role, and invalid tokens cannot supply additional roles to WebSocket requests. The broker fails to start if MultiRolesTokenAuthorizationProvider is configured with authorization enabled but without a token authentication provider.
This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately can remove the anonymousUserRole setting from the broker and WebSocket service configurations, or restrict network access to the HTTP endpoints of these services to trusted clients. |
| Improper Verification of Cryptographic Signature vulnerability in Drupal Monobank payment API allows Signature Spoof. This issue affects Monobank payment API versions: from 0.0.0 to 1.0.3. |
| vLLM before 0.31.0 uses a client-supplied multimodal uuid verbatim as cache identity with no consistency check on cache hits, allowing engine crashes. Unauthenticated attackers can desynchronize the P0/P1 processor caches to trigger a fatal token-placeholder mismatch, killing the entire serving instance until restarted. |
| H3C HDM Family-A verifies the RSA signature of a firmware image against a public key it reads from the mutable file `/conf/public.pem`. That file is writable by an authenticated Redfish client through the `UpdateService.UploadSignKey` action, which stores the uploaded body verbatim after validating only that the multipart filename ends in `.pem`. An administrator, or any account with `firmware-update` privilege, can therefore replace the trust anchor with their own key, sign a malicious image with the matching private key, and have it pass verification. Family-A has no hardware root-of-trust (no PFR) to catch the substituted key.
This was observed on H3C HDM Family-A G5 HDM 6.14.01. H3C HDM Family-A G3/G5 builds carrying the Redfish/DRE update tree appear to be affected. HDM2 uses a different update path and is not covered by this finding. |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Image Packaging System). The supported version that is affected is 11.4. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise Oracle Solaris. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Solaris accessible data. CVSS 3.1 Base Score 3.1 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:N). |
| In the Golang Chi web framework, the ClientIPFromXFF middleware skips any X-Forwarded-For entry in a configured trusted CIDR but never verifies that the direct TCP peer in http.Request.RemoteAddr belongs to that CIDR. A client that can reach the Go server directly can therefore append a trusted-looking proxy address and choose the client IP returned by middleware.GetClientIP.
This issue affects chi before 5.4.0. |
| Use of a less trusted source for the envelope sender in the external-account download of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write in the name of a domain the server hosts sent on by the server with an envelope sender at that domain, so that it passes the domain's SPF and DMARC at other receivers. A message the server downloads from an external POP3 or IMAP account has no SMTP envelope of its own, and the server took the address in its From header as its envelope sender, whatever that address was. A forward or redirect of the downloaded message to an outside address then left with that address as its envelope sender, which the Sender Rewriting Scheme leaves alone for a hosted domain, so that the receiver's SPF check passed for the forged domain, aligned even under strict alignment, with no non-default setting, host name record or DMARC policy needed. An attacker needs to know a mailbox elsewhere that an account here collects and forwards to an outside address; an account holder who adds an external account of their own can collect from a server of their own, which matters where SmtpAuthenticatedSenderCheck holds signed-in senders to their own addresses. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13, pointerLock permission requests from some cross-origin iframes caused session.setPermissionRequestHandler() to receive the top-level frame's requestingUrl and isMainFrame values instead of those of the requesting frame. An application that embeds untrusted iframe content and grants pointer lock based on the requesting origin could therefore grant the permission under the top-level page's identity. Applications that deny pointerLock for untrusted embedded content are not affected. This issue is fixed in versions 42.11.9, 43.7.6, 44.5.0, and 45.0.0-alpha.13. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.8 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that under certain conditions could have allowed an authenticated user to access paid AI features without a valid subscription due to insufficient server-side validation in billing eligibility checks. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| The Simple Shopping Cart WordPress plugin before 5.3.3 does not verify submitted product prices against a value only the site owner can set, allowing users with the Contributor role and above to register attacker-chosen prices for existing products, which any visitor can then use to add those products to the cart at that price. |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can trust a forged process identifier in a marker that an attacker can modify but cannot remove, allowing an authorized contender such as another process of the holder's account or root to act as a confused deputy, remove the live marker, and admit another holder. This issue is fixed in version 4.2.1. |
| Red Hat Product Security has determined that this is not a vulnerability in bootc or containers-common. bootc fetches images under /etc/containers/policy.json. The shipped default is insecureAcceptAnything for registries without an explicit signature requirement; registry.redhat.io and registry.access.redhat.com require signatures. Updating a mutable tag requires the ability to publish to the reference an administrator has already configured the host to follow. Requiring signatures is available through that policy and through bootc enforce-container-sigpolicy, which is off by default. Persistence of /var across bootc rollback is expected image-mode behavior. |
