| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system. |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| A flaw was found in sudo. When sudoers rules use NOTBEFORE or NOTAFTER time-based access restrictions with timestamps that omit the trailing 'Z' timezone indicator, the time evaluation relies on the TZ environment variable inherited from the calling user. Because sudo is a setuid-root program, an unprivileged local user can set TZ to an extreme timezone offset to shift the authorization window by up to approximately 25 hours, causing expired rules to be treated as valid. This allows the user to execute commands outside the intended time window. Authentication is not bypassed; only the time-based authorization check is affected. |
| A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install. |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a sdiv overflow issue
Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
The failure is due to the below signed divide:
LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.
Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
- LLONG_MIN/-1 for 64bit operation
- INT_MIN/-1 for 32bit operation
- LLONG_MIN%-1 for 64bit operation
- INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.
On arm64, there are no exceptions:
- LLONG_MIN/-1 = LLONG_MIN
- INT_MIN/-1 = INT_MIN
- LLONG_MIN%-1 = 0
- INT_MIN%-1 = 0
where -1 can be an immediate or in a register.
Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.
sdiv:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L2
if tmp == 0 goto L1
rY = 0
L1:
rY = -rY;
goto L3
L2:
rY /= rX
L3:
smod:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L1
if tmp == 1 (is64 ? goto L2 : goto L3)
rY = 0;
goto L2
L1:
rY %= rX
L2:
goto L4 // only when !is64
L3:
wY = wY // only when !is64
L4:
[1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix improper extts handling
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix task_struct reference leak
During the execution of the following stress test with linux-rt:
stress-ng --cyclic 30 --timeout 30 --minimize --quiet
kmemleak frequently reported a memory leak concerning the task_struct:
unreferenced object 0xffff8881305b8000 (size 16136):
comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s)
object hex dump (first 32 bytes):
02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debug hex dump (first 16 bytes):
53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S...............
backtrace:
[<00000000046b6790>] dup_task_struct+0x30/0x540
[<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0
[<00000000ced59777>] kernel_clone+0xb0/0x770
[<00000000a50befdc>] __do_sys_clone+0xb6/0xf0
[<000000001dbf2008>] do_syscall_64+0x5d/0xf0
[<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
The issue occurs in start_dl_timer(), which increments the task_struct
reference count and sets a timer. The timer callback, dl_task_timer,
is supposed to decrement the reference count upon expiration. However,
if enqueue_task_dl() is called before the timer expires and cancels it,
the reference count is not decremented, leading to the leak.
This patch fixes the reference leak by ensuring the task_struct
reference count is properly decremented when the timer is canceled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: change vm->task_info handling
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix netif state handling
mlx5e_suspend cleans resources only if netif_device_present() returns
true. However, mlx5e_resume changes the state of netif, via
mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED.
In the below case, the above leads to NULL-ptr Oops[1] and memory
leaks:
mlx5e_probe
_mlx5e_resume
mlx5e_attach_netdev
mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach()
register_netdev <-- failed for some reason.
ERROR_FLOW:
_mlx5e_suspend <-- netif_device_present return false, resources aren't freed :(
Hence, clean resources in this case as well.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at0xffffffffffffffd6.
RSP: 0018:ffff888178aaf758 EFLAGS: 00010246
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x14c/0x3c0
? exc_page_fault+0x75/0x140
? asm_exc_page_fault+0x22/0x30
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core]
mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib]
mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib]
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe1/0x210 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x637/0x840
__auxiliary_device_add+0x3b/0xa0
add_adev+0xc9/0x140 [mlx5_core]
mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core]
mlx5_register_device+0x53/0xa0 [mlx5_core]
mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core]
mlx5_init_one+0x3b/0x60 [mlx5_core]
probe_one+0x44c/0x730 [mlx5_core]
local_pci_probe+0x3e/0x90
pci_device_probe+0xbf/0x210
? kernfs_create_link+0x5d/0xa0
? sysfs_do_create_link_sd+0x60/0xc0
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
pci_bus_add_device+0x54/0x80
pci_iov_add_virtfn+0x2e6/0x320
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
kernfs_fop_write_iter+0x10c/0x1a0
vfs_write+0x291/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| A flaw was found in flatpak-builder where Git hooks are not disabled when applying patch sources with use-git-am: true. An attacker who can provide a malicious source containing a Git post-applypatch hook can cause the hook to execute on the host during the build process, resulting in arbitrary code execution with the privileges of the user running flatpak-builder. |
| A flaw was found in pki-core. The v2 REST ACL filter selects a tie-breaking permission for colliding literal and wildcard ACL keys using lexicographic string comparison rather than specificity, causing a wildcard-mapped permission to override a more specific literal-mapped permission when both match. In the CA's profile-management REST API this allows a request to POST /v2/profiles/raw -- intended to require Administrator-level profiles.create permission -- to instead be authorized under the lower-privileged profiles.approve permission held by the default Certificate Manager Agents group. The highest threat from this vulnerability is to confidentiality and integrity of the certificate authority's issuance policy. |
| A flaw was found in Dogtag PKI, as used by FreeIPA's certificate authority component. The certificate profile import functionality does not fully validate uploaded profile content beyond the profile ID. An authenticated user with CA Administrator privileges can exploit Dogtag's ExternalProcessConstraint mechanism to execute arbitrary commands with attacker-controlled environment variables, achieving code execution as the pkiuser account. |
| A flaw was found in the SFTP backend in gvfs. When mounting a share and reading a file, a malicious SFTP server can cause read_reply() to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the allocated buffer size, causing the operation to write past the intended boundaries. This issue allows a malicious server to corrupt adjacent heap memory in the gvfsd-sftp process, resulting in a denial of service as the process aborts upon detecting the heap corruption or potentially allowing arbitrary code execution. |
| A flaw was found in the admin backend of gvfs. The privileged gvfsd-admin daemon changes the ownership of newly created private D-Bus sockets by calling the link-following chown() function on a pathname inside a user-controlled directory. A local attacker can exploit this via a Time-of-Check Time-of-Use (TOCTOU) race condition and exchange the socket pathname with a symbolic link pointing to an arbitrary root-owned file (such as /etc/pam.d/su). The daemon subsequently follows the symlink and changes the ownership of the targeted root-owned file to the attacker's user ID. This allows an authenticated local attacker to modify critical system files, leading to a full local privilege escalation to root. |
| A flaw was found in GIMP's Paint Shop Pro (PSP) file format parser. This heap buffer overflow vulnerability allows a remote attacker to cause arbitrary code execution or a denial of service (DoS) by tricking a user into opening a specially crafted PSP image file. The vulnerability occurs because the software incorrectly calculates buffer sizes when processing low bit-depth images, leading to an overwrite of adjacent memory. |
| A flaw was found in RESTEasy's SourceProvider. This vulnerability allows an unauthenticated attacker to perform an unauthenticated remote file read. By sending a specially crafted XML body with a DOCTYPE declaration referencing external entities to an endpoint that accepts application/xml and returns Source or StreamSource, the server can be tricked into resolving the entity and including sensitive file contents in the HTTP response. This is due to the SourceProvider.writeTo() method creating a SAXParser without disabling external entity resolution, leading to an XML External Entity (XXE) vulnerability. |
| A flaw was found in bubblewrap. During sandbox setup, creating files or directories under the new root can follow a parent symlink onto the host via /oldroot, writing attacker-chosen paths outside the sandbox as the launching user. This happens before the sandboxed process starts. This issue is GHSA-pxhw-h44j-8pfx. It is fixed in bubblewrap 0.12.0. |
