| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs image may be corrupted after below testcase:
- mkfs.f2fs -O extra_attr,compression -f /dev/vdb
- mount /dev/vdb /mnt/f2fs
- touch /mnt/f2fs/file
- f2fs_io setflags compression /mnt/f2fs/file
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=4
- f2fs_io release_cblocks /mnt/f2fs/file
- truncate -s 8192 /mnt/f2fs/file
- umount /mnt/f2fs
- fsck.f2fs /dev/vdb
[ASSERT] (fsck_chk_inode_blk:1256) --> ino: 0x5 has i_blocks: 0x00000002, but has 0x3 blocks
[FSCK] valid_block_count matching with CP [Fail] [0x4, 0x5]
[FSCK] other corrupted bugs [Fail]
The reason is: partial truncation assume compressed inode has reserved
blocks, after partial truncation, valid block count may change w/o
.i_blocks and .total_valid_block_count update, result in corruption.
This patch only allow cluster size aligned truncation on released
compress inode for fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't set the MFP flag for the GTK
The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible. |
| In the Linux kernel, the following vulnerability has been resolved:
cpumap: Zero-initialise xdp_rxq_info struct before running XDP program
When running an XDP program that is attached to a cpumap entry, we don't
initialise the xdp_rxq_info data structure being used in the xdp_buff
that backs the XDP program invocation. Tobias noticed that this leads to
random values being returned as the xdp_md->rx_queue_index value for XDP
programs running in a cpumap.
This means we're basically returning the contents of the uninitialised
memory, which is bad. Fix this by zero-initialising the rxq data
structure before running the XDP program. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated. |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: keep DMA buffers required for suspend/resume
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject iftype change with mesh ID change
It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.
We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
The Linked list element and pointer are not stored in the same memory as
the HDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: nosy: ensure user_length is taken into account when fetching packet contents
Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to guarantee persisting compressed blocks by CP
If data block in compressed cluster is not persisted with metadata
during checkpoint, after SPOR, the data may be corrupted, let's
guarantee to write compressed page by checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to cover normal cluster write with cp_rwsem
When we overwrite compressed cluster w/ normal cluster, we should
not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data
will be corrupted if partial blocks were persisted before CP & SPOR,
due to cluster metadata wasn't updated atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix missing reserved tailroom
Use rbi->len instead of rcd->len for non-dataring packet.
Found issue:
XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom
WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1
RIP: 0010:xdp_warn+0xf/0x20
...
? xdp_warn+0xf/0x20
xdp_do_redirect+0x15f/0x1c0
vmxnet3_run_xdp+0x17a/0x400 [vmxnet3]
vmxnet3_process_xdp+0xe4/0x760 [vmxnet3]
? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3]
vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3]
vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3]
__napi_poll+0x20/0x180
net_rx_action+0x177/0x390 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: br_netfilter: skip conntrack input hook for promisc packets
For historical reasons, when bridge device is in promisc mode, packets
that are directed to the taps follow bridge input hook path. This patch
adds a workaround to reset conntrack for these packets.
Jianbo Liu reports warning splats in their test infrastructure where
cloned packets reach the br_netfilter input hook to confirm the
conntrack object.
Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has
reached the input hook because it is passed up to the bridge device to
reach the taps.
[ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core
[ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19
[ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1
[ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202
[ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000
[ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000
[ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003
[ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000
[ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800
[ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000
[ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0
[ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 57.585440] Call Trace:
[ 57.585721] <IRQ>
[ 57.585976] ? __warn+0x7d/0x130
[ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.586811] ? report_bug+0xf1/0x1c0
[ 57.587177] ? handle_bug+0x3f/0x70
[ 57.587539] ? exc_invalid_op+0x13/0x60
[ 57.587929] ? asm_exc_invalid_op+0x16/0x20
[ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.588825] nf_hook_slow+0x3d/0xd0
[ 57.589188] ? br_handle_vlan+0x4b/0x110
[ 57.589579] br_pass_frame_up+0xfc/0x150
[ 57.589970] ? br_port_flags_change+0x40/0x40
[ 57.590396] br_handle_frame_finish+0x346/0x5e0
[ 57.590837] ? ipt_do_table+0x32e/0x430
[ 57.591221] ? br_handle_local_finish+0x20/0x20
[ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter]
[ 57.592286] ? br_handle_local_finish+0x20/0x20
[ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter]
[ 57.593348] ? br_handle_local_finish+0x20/0x20
[ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat]
[ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter]
[ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter]
[ 57.595280] br_handle_frame+0x1f3/0x3d0
[ 57.595676] ? br_handle_local_finish+0x20/0x20
[ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0
[ 57.596566] __netif_receive_skb_core+0x25b/0xfc0
[ 57.597017] ? __napi_build_skb+0x37/0x40
[ 57.597418] __netif_receive_skb_list_core+0xfb/0x220 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: walk over current view on netlink dump
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: validate pppoe header
Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
Commit d7a08838ab74 ("mm: userfaultfd: fix unexpected change to src_folio
when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to
after clearing the page-table and ensuring that it's not pinned. This
avoids failure of swapout+migration and possibly memory corruption.
However, the commit missed fixing it in the huge-page case. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Avoid crash on very long word
In case a console is set up really large and contains a really long word
(> 256 characters), we have to stop before the length of the word buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/pmu: Disable support for adaptive PEBS
Drop support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken without an obvious/easy path forward, and because
exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak
host kernel addresses to the guest.
Bug #1 is that KVM doesn't account for the upper 32 bits of
IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g
fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters()
stores local variables as u8s and truncates the upper bits too, etc.
Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value
for PEBS events, perf will _always_ generate an adaptive record, even if
the guest requested a basic record. Note, KVM will also enable adaptive
PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the
guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero,
i.e. the guest will only ever see Basic records.
Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper
bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and
intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE
either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what
KVM requests.
Bug #4 is that adaptive PEBS *might* effectively bypass event filters set
by the host, as "Updated Memory Access Info Group" records information
that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER.
Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least
zeros) when entering a vCPU with adaptive PEBS, which allows the guest
to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries"
records.
Disable adaptive PEBS support as an immediate fix due to the severity of
the LBR leak in particular, and because fixing all of the bugs will be
non-trivial, e.g. not suitable for backporting to stable kernels.
Note! This will break live migration, but trying to make KVM play nice
with live migration would be quite complicated, wouldn't be guaranteed to
work (i.e. KVM might still kill/confuse the guest), and it's not clear
that there are any publicly available VMMs that support adaptive PEBS,
let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't
support PEBS in any capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
Check kvm_mmu_page_ad_need_write_protect() when deciding whether to
write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU
accounts for any role-specific reasons for disabling D-bit dirty logging.
Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is
being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled.
KVM always disables PML when running L2, even when L1 and L2 GPAs are in
the some domain, so failing to write-protect TDP MMU SPTEs will cause
writes made by L2 to not be reflected in the dirty log.
[sean: massage shortlog and changelog, tweak ternary op formatting] |
