| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Feast. An authorization bypass vulnerability exists in the /materialize and /materialize-incremental endpoints. By sending a specially crafted request that omits the feature_views field, an attacker can bypass intended permission checks. This allows an unauthenticated remote attacker, or any authenticated user, to trigger a full re-materialization of all feature views. The consequence is a Denial of Service (DoS) due to data corruption and significant resource consumption across all tenants. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid livelock while updating retransmit path
sctp_assoc_update_retran_path() can loop forever when every remaining
transport, including retran_path, is SCTP_UNCONFIRMED: the state check
runs before the wraparound test, so the loop cannot observe that it has
completed a full pass.
Fix this by considering a transport only when it is not UNCONFIRMED,
then checking whether the walk has returned to retran_path. This makes
the full-pass termination independent of the transport state while
preserving the existing fallback selection semantics.
Also restore the NULL guard around the retran_path assignment. In the
all-UNCONFIRMED case there is no eligible replacement transport, and
installing NULL would leave later retransmit-path users and the debug
print with a NULL path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget
hfsc_classify() applies the "filter may only point downwards" level check
only when the filter result carries no bound class. A filter created with
a flowid gets res.class set once at bind time, so the check never runs for
it during classification. hfsc_adjust_levels() can later raise a class's
level without revalidating existing bindings, leaving two binds that were
each legal at bind time pointing at each other; the classify walk then
bounces between two interior classes forever with the qdisc lock held and
BH disabled — a soft lockup from a single packet. The stuck walk trips
the watchdog:
watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444]
RIP: 0010:u32_classify+0x542/0x17f0
...
tcf_classify+0x66/0xa0
hfsc_enqueue+0x166/0xdf0
Bound the traversal with a budget of non-descending hops, the only way a
configured walk can move without descending the class tree once levels
drift after bind time. The budget is cumulative over the whole walk and
is deliberately not reset on a descending hop: a chain that alternates a
descent with a lateral hop would return the budget every lap and never
trip. Descending hops never decrement it, so legitimately deep trees are
unaffected and a terminating lateral chain still classifies normally.
Drop the packet with a rate-limited warning once the budget is exhausted,
mirroring the merged HTB fix.
This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit
htb_classify inner-class filter hops"), which bounded the same classify
loop on the HTB side but left the HFSC walk unbounded.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Build a cycle with two legal-at-bind-time flowid binds and a level
drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2
(sibling of X) with children 1:20 and 1:200; root u32 filter flowid
1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level
rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping
on the device). Unfixed kernel: classify spins with the qdisc lock
held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: clear stale buf->page after recycling on skb build failure
In stmmac_rx(), when napi_build_skb() fails the descriptor page is
recycled back to the page pool with page_pool_recycle_direct(), but
buf->page is left pointing at the recycled page, unlike every other
consumption site in the function which clears the pointer after handing
the page away.
With the stale pointer stmmac_rx_refill() skips the replacement
allocation and programs the already-recycled page back into the RX
descriptor.
Clear buf->page on the napi_build_skb() failure path to keep the buffer
lifecycle consistent with the other consumption sites. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO
gve_can_send_tso() computes how many buffers each segment of a GSO
packet would span, and for this it needs the length of the headers
that the device replicates in front of every segment.
It unconditionally uses skb_tcp_all_headers(), which reads the doff
field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header:
tcp_hdrlen() then reads one byte of the UDP payload, and header_len
can be anything in [0, 60] instead of the transport offset plus the
eight bytes of the UDP header that gve_prep_tso() programs into the
TSO context descriptor.
A wrong header length shifts all the segment boundaries computed in
the loop, so the number of buffers per segment can be over or under
estimated. In the first case, GSO is needlessly disabled for this
packet by gve_features_check_dqo() and the stack has to segment it.
In the second case, the driver hands the device a packet whose
segments span more than GVE_TX_MAX_DATA_DESCS buffers.
Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what
gve_prep_tso() does. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: protect the dm-verity root hash with RCU
ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes
a new one on ->preresume, while policy evaluation can still be
dereferencing it.
Protect the root hash with RCU. The evaluation path already runs under
rcu_read_lock().
[FW: remove model name according to latest guideline] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix incorrect RCU teardown order
i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate
over the fences in an GEM object without holding a reference but only
the RCU read side lock.
What can happen here is that the GEM object is destroyed concurrently
while i915_gem_busy_ioctl is still running. This won't free the GEM
objects memory, but still drops all the dma_fence references.
Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it
assumes that a new fence list was installed and re-starts the loop.
But in the case of a destroyed GEM object a new fence list is never
installed, only the old one freed and therefore the iteration never
finishes resulting in an endless loop.
The solution is to drop the fence references only after the RCU grace
period.
The fixes tag is not necessary the patch introducing the problem, but the
one making it so worse that we need to address it.
This problem was pointed out by Sashiko-bot.
(cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: drop dquot flush lock when we can't find a buffer to flush
LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock
if it can't grab the buffer associated with the dquot. Since there's no
buffer, nobody else is going to drop the dqflock, so we need to do it
ourselves. |
| The WP Directory Kit plugin for WordPress is vulnerable to time-based SQL Injection via 'display_name' Profile Field (Second-Order) in all versions up to, and including, 1.5.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order injection: a Subscriber stores a display_name containing a single quote via their own profile, which WordPress preserves verbatim; the payload is then triggered when WdkCachedUserEditor::update_listings_user_editor() re-reads that stored value and passes it unsanitized to the SQL sink. |
| Missing Authorization vulnerability in Themeum Kirki kirki allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Kirki: from n/a through 6.2.0. |
| A weakness has been identified in itsourcecode Online Cake Ordering System 1.0. This issue affects some unknown processing of the file confirm.php. This manipulation of the argument cancel causes sql injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| The Post Voting System WordPress plugin through 1.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. |
| Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.28. |
| Missing Authorization vulnerability in WPGraphQL WPGraphQL wp-graphql allows Retrieve Embedded Sensitive Data.This issue affects WPGraphQL: from n/a through 2.23.1. |
| The Animated Number Counters plugin for WordPress is vulnerable to generic SQL Injection via the 'counterid' parameter in all versions up to, and including, 3.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with editor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is a second-order SQL injection: the write path correctly uses $wpdb->prepare(), but that protection is not carried forward to the read path, where the retrieved value is concatenated unsanitized into unprepared queries in both a single-quoted string context and a bare numeric context. |
| Junrar is an open source Java RAR archive library. Prior to 7.6.1, RarVM.ExecuteCode in src/main/java/com/github/junrar/unpack/vm/RarVM.java can repeatedly execute a VM_JMP instruction whose target is greater than or equal to the prepared program's codeSize. The setIP() function returns success without changing the instruction pointer or decrementing maxOpCount, and the jump handler continues before loop-end accounting, leaving both values unchanged. A crafted RAR4 archive can therefore keep an extraction thread in an infinite CPU loop and exhaust archive-processing worker capacity. The RAR virtual machine does not expose native process execution, so the supported impact is availability loss rather than code execution. This issue is fixed in version 7.6.1. |
| The Ignition Perspective module does not properly validate session privileges when determining Designer-level access. An authenticated user with access to a Vision project could provide their valid Vision session identifier and gain Designer-level privileges. An attacker could exploit these elevated privileges to execute arbitrary code in the context of the Ignition Gateway process. |
| Gitea's web attachment handler skips its cross-repository ownership check for attachments created before 16 January 2026 and checks permissions against the repository named in the request URL instead. An unauthenticated attacker who knows a private attachment's UUID can request it through a public repository's attachment path and retrieve its contents. This can expose issue and pull request attachments or release assets; the random attachment UUID must already be known to the attacker. |
| Gitea allows a token with write:user scope to register an attacker-controlled SSH public key on the token owner's account. API requests signed with the corresponding private key authenticate as that account through HTTP Signature without API token scope information, causing route-level token scope checks to be skipped. This converts a user-scoped token into an unscoped API authentication method while retaining the account's normal role and repository permissions. |
