Export limit exceeded: 21425 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (8578 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98131 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the frame is dropped but the DMA mappings already created for the linear part and for the fragments mapped before the failure are never unmapped, leaking DMA mappings. Fix the leak by walking back over the descriptors used by the frame and releasing each of them with stmmac_free_tx_buffer(). Moreover, release the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. | ||||
| CVE-2026-97939 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). | ||||
| CVE-2026-97515 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state. | ||||
| CVE-2026-93243 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: properly account locked pages secretmem accounts folios by treating memory as if it were mlock()'d and thus limited by the RLIMIT_MEMLOCK limit. However the folios are unevictable and remain so until the inode is evicted, eliminating usual mlock() semantics - mapping folios then unmapping them does not clear their unevictable state, since it depends on AS_UNEVICTABLE, not PG_mlocked. A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply map then unmap and VmLck no longer counts the secretmem range. Worse, folios are not accounted in the process's RSS, meaning the OOM killer won't know to kill the process. Repeatedly mapping/unmapping (or forking) can then result in the consumption of all available system memory with unevictable folios and cause system instability. A secretmem fd can be passed between processes and over fork so a per-process limit simply does not make sense, so follow the precedent set by io_uring, perf, skbuff, iommufd and xdp by tracking the number of locked pages in user_struct->locked_vm. Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK applies per-user not per-process, so it doesn't make sense to bypass for users with CAP_IPC_LOCK, therefore remove this bypass. There is simply no reason to carry on marking the mapping as mlock()'d since it's misleading and the lifecycle is now correctly handled, so remove this too. Note that secretmem does not support any form of truncation (including hole punching) and the folios are unreclaimable, so the folios need only be accounted on fault and unaccounted on inode destruction. __secretmem_account_pages() is more or less a duplicate of the code that io_uring etc. use, but since this is a bug fix that needs backporting, defer any de-duplication efforts to a follow-up. test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has been removed, so remove the test altogether for the fix. A new test will be sent separately for upstream. | ||||
| CVE-2026-92519 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. Fix this by adding the missing kfree(jit_data->ctx.offset) in bpf_jit_free(). | ||||
| CVE-2026-92488 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed, leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and permanently disables the command queue, so no retry can succeed; the RDMA core keeps the object after a failed destructor and forced uverbs cleanup then nulls the pointers, making the resources unreachable. Warn on failure but release every software-owned resource and return success, since during terminal destruction the hardware command result is only diagnostic. | ||||
| CVE-2026-90424 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits it, and preallocates its logical VCMDQs. Two of its error paths leak. When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach it; free it directly there. A later VCMDQ preallocation failure instead leaves VINTF0 published, and so this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag only afterward, from a HW read-back, so the still-uninited VINTF0 reads as guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields it never set up. Decide ownership from vintf->idx instead, the index assigned when its id is allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure HW-readback state. | ||||
| CVE-2026-90422 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path When mtk_clk_register_pllfhs function fails to register a PLL, it unregisters all PLLs and cleans up itself in its error path before returning, so the function callers don't need to do it. But contrary to mtk_clk_unregister_pllfhs function, that does almost the same sequence, it does not free the IO memory mapped on fhctl node, leading to a leak. Fix this leak by factorizing the cleanup sequence in a new private function and use it both mtk_clk_register_pllfhs and mtk_clk_unregister_pllfhs functions. Also, change the loop index start value to avoid the -1 operation on index at each loop. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90346 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: clean up color-change beacon data on errors nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies. A parsing failure returned directly instead of using the out: cleanup, leaking any allocations completed before the error. Allocate the nested attribute table before parsing beacon_next. Its allocation failure can then return before beacon data exists, while a later parsing failure uses out: to release the parsed data. | ||||
| CVE-2026-90247 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock leak in irq_work path stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the same mmap_unlock_work. Both callers only check whether the work is busy before taking mmap_lock, so a nested caller can reuse the slot before the first caller queues it. Two read locks may then be acquired while only one deferred unlock runs, leaking a read lock and blocking exit_mmap(). Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper in stackmap and bpf_find_vma() so both callers release the reservation on trylock failure. Keep rejecting the slot while the irq_work remains busy. Release it after the irq_work callback unlocks the mm. | ||||
| CVE-2026-90213 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix memory leak in error path of build_tree() In the error path of build_tree(), node instances can remain in the local linked list when the function returns. Whenever an invalid value is detected in the self ID sequence, each allocated node instance is either an entry in the linked list or an entry in the ports array of its parent node. Therefore, the allocate node instances can be safely released by traversing the linked list from its head. Release the remaining node instances with for_each_fw_node() before returning to the caller. | ||||
| CVE-2026-90187 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no longer necessary because every caller already invokes null_del_dev() first: via nullb_group_drop_item() before nullb_device_release(), in the null_add_dev() error path of null_create_dev(), and in null_destroy_dev(). Remove the redundant call. And take &lock around zone_cond_store() in the two store wrappers to serialize dev->zones check-and-deref against its alloc/free, which already run under &lock. The reason there was no problem before is that only nullb_device_release() or null_exit() frees the dev->zones, which guarantees that subsequent users won't access the configfs interface. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90099 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the per-CPU counter. If alloc_percpu() fails the errout path kfree'd fnew without idr_remove, leaving a dangling pointer in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable on demand (memcg at memory.max), making the dead path attacker-reachable and burning the handle permanently. Add the idr_remove on the percpu failure path, matching the basic_set_parms failure-path pattern. Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to extend to the other classifiers. Conditions to recreate the bug: - CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used), CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS. - Unprivileged user in a fresh user+network namespace (unshare -Urn), or root with CAP_NET_ADMIN. - Create a large number of tc filters (e.g. tc filter add dev lo ingress ... <classifier> ...) while watching a memcg-limited cgroup: system slab grows far faster than memory.current, pinning kernel memory outside memcg charging. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89813 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the KIQ ring fences on reset Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a polling fence, so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a reset the first KIQ submission can poll forever on a seq that is never written back. Force complete the KIQ ring fences too so their hw fence is realigned to sync_seq. | ||||
| CVE-2026-89812 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the MES ring fences on reset The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1 reset, while fence_drv.sync_seq keeps advancing for every packet. When the reset is triggered because MES itself stopped responding, the timed-out packets advance sync_seq past the last hw fence value MES wrote. After resume the first MES submission polls forever on a seq that is never written back, failing the resume and wedging the box on a second reset: amdgpu: MES ring buffer is full. amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110) amdgpu: resume of IP block <gfx_v11_0> failed -110 amdgpu: GPU reset end with ret = -110 Force complete the MES scheduler ring fences together with the scheduler rings so their hw fence is realigned to sync_seq. v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. | ||||
| CVE-2026-74385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check return value of nvmet_tcp_set_queue_sock The return value of nvmet_tcp_set_queue_sock() is currently ignored in nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket not being in TCP_ESTABLISHED state), the socket callbacks will not be properly set, leading to queue and socket leakage. Fix this by capturing the return value and calling nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. | ||||
| CVE-2026-72363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio state after ENOMEM whilst under writeback iteration Fix the state of the current folio when ENOMEM occurs during writeback iteration. The folio needs to be redirtied and unlocked before the terminal writeback_iter() is invoked. | ||||