| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga_mgr_test_img_load_sgt() allocates memory for sgt using
kunit_kzalloc() however it does not check if the allocation failed.
It then passes sgt to sg_alloc_table(), which passes it to
__sg_alloc_table(). This function calls memset() on sgt in an attempt to
zero it out. If the allocation fails then sgt will be NULL and the
memset will trigger a NULL pointer dereference.
Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: prevent a NULL deref in rtnl_create_link()
At the time rtnl_create_link() is running, dev->netdev_ops is NULL,
we must not use netdev_lock_ops() or risk a NULL deref if
CONFIG_NET_SHAPER is defined.
Use netif_set_group() instead of dev_set_group().
RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline]
RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82
Call Trace:
<TASK>
rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674
rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813
__rtnl_newlink net/core/rtnetlink.c:3940 [inline]
rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix yet another UAF in binder_devices
Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices")
addressed a use-after-free where devices could be released without first
being removed from the binder_devices list. However, there is a similar
path in binder_free_proc() that was missed:
==================================================================
BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100
Write of size 8 at addr ffff0000c773b900 by task umount/467
CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_remove_device+0xd4/0x100
binderfs_evict_inode+0x230/0x2f0
evict+0x25c/0x5dc
iput+0x304/0x480
dentry_unlink_inode+0x208/0x46c
__dentry_kill+0x154/0x530
[...]
Allocated by task 463:
__kmalloc_cache_noprof+0x13c/0x324
binderfs_binder_device_create.isra.0+0x138/0xa60
binder_ctl_ioctl+0x1ac/0x230
[...]
Freed by task 215:
kfree+0x184/0x31c
binder_proc_dec_tmpref+0x33c/0x4ac
binder_deferred_func+0xc10/0x1108
process_one_work+0x520/0xba4
[...]
==================================================================
Call binder_remove_device() within binder_free_proc() to ensure the
device is removed from the binder_devices list before being kfreed. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix use-after-free in binderfs_evict_inode()
Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled
kernel, I've noticed the following:
BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0
Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699
CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1c2/0x2a0
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __virt_addr_valid+0x18c/0x540
? __virt_addr_valid+0x469/0x540
print_report+0x155/0x840
? __virt_addr_valid+0x18c/0x540
? __virt_addr_valid+0x469/0x540
? __phys_addr+0xba/0x170
? binderfs_evict_inode+0x1de/0x2d0
kasan_report+0x147/0x180
? binderfs_evict_inode+0x1de/0x2d0
binderfs_evict_inode+0x1de/0x2d0
? __pfx_binderfs_evict_inode+0x10/0x10
evict+0x524/0x9f0
? __pfx_lock_release+0x10/0x10
? __pfx_evict+0x10/0x10
? do_raw_spin_unlock+0x4d/0x210
? _raw_spin_unlock+0x28/0x50
? iput+0x697/0x9b0
__dentry_kill+0x209/0x660
? shrink_kill+0x8d/0x2c0
shrink_kill+0xa9/0x2c0
shrink_dentry_list+0x2e0/0x5e0
shrink_dcache_parent+0xa2/0x2c0
? __pfx_shrink_dcache_parent+0x10/0x10
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
do_one_tree+0x23/0xe0
shrink_dcache_for_umount+0xa0/0x170
generic_shutdown_super+0x67/0x390
kill_litter_super+0x76/0xb0
binderfs_kill_super+0x44/0x90
deactivate_locked_super+0xb9/0x130
cleanup_mnt+0x422/0x4c0
? lockdep_hardirqs_on+0x9d/0x150
task_work_run+0x1d2/0x260
? __pfx_task_work_run+0x10/0x10
resume_user_mode_work+0x52/0x60
syscall_exit_to_user_mode+0x9a/0x120
do_syscall_64+0x103/0x210
? asm_sysvec_apic_timer_interrupt+0x1a/0x20
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0xcac57b
Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8
RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850
RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff
R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718
R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830
</TASK>
Allocated by task 1705:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x213/0x3e0
binderfs_binder_device_create+0x183/0xa80
binder_ctl_ioctl+0x138/0x190
__x64_sys_ioctl+0x120/0x1b0
do_syscall_64+0xf6/0x210
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1705:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x46/0x50
__kasan_slab_free+0x62/0x70
kfree+0x194/0x440
evict+0x524/0x9f0
do_unlinkat+0x390/0x5b0
__x64_sys_unlink+0x47/0x50
do_syscall_64+0xf6/0x210
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This 'stress-ng' workload causes the concurrent deletions from
'binder_devices' and so requires full-featured synchronization
to prevent list corruption.
I've found this issue independently but pretty sure that syzbot did
the same, so Reported-by: and Closes: should be applicable here as well. |
| In the Linux kernel, the following vulnerability has been resolved:
userns and mnt_idmap leak in open_tree_attr(2)
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma()
This fixes the following problem:
[ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30
[ 750.346409] [ T9870] ==================================================================
[ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870
[ 750.347705] [ T9870]
[ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary)
[ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 750.348085] [ T9870] Call Trace:
[ 750.348086] [ T9870] <TASK>
[ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0
[ 750.348106] [ T9870] print_report+0xd1/0x640
[ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210
[ 750.348124] [ T9870] kasan_report+0xe7/0x130
[ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30
[ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs]
[ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs]
[ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs]
[ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs]
[ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0
[ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100
[ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0
[ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs]
[ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190
[ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70
[ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70
[ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0
[ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs]
[ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs]
[ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs]
[ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs]
[ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.349987] [ T9870] ? do_writepages+0x21f/0x590
[ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140
[ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs]
[ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs]
[ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0
[ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60
[ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0
[ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs]
[ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs]
[ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs]
[ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.350763] [ T98
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add sanity checks for drm_edid_raw()
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to
return proper EDID bytes the caller wants: it may be either NULL (that
leads to an Oops) or with too long bytes over the fixed size raw_edid
array (that may lead to memory corruption). The latter was reported
actually when connected with a bad adapter.
Add sanity checks for drm_edid_raw() to address the above corner
cases, and return EDID_BAD_INPUT accordingly.
(cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf) |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: fix folio unpinning
syzbot complains about an unmapping failure:
[ 108.070381][ T14] kernel BUG at mm/gup.c:71!
[ 108.070502][ T14] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 108.123672][ T14] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250221-8.fc42 02/21/2025
[ 108.127458][ T14] Workqueue: iou_exit io_ring_exit_work
[ 108.174205][ T14] Call trace:
[ 108.175649][ T14] sanity_check_pinned_pages+0x7cc/0x7d0 (P)
[ 108.178138][ T14] unpin_user_page+0x80/0x10c
[ 108.180189][ T14] io_release_ubuf+0x84/0xf8
[ 108.182196][ T14] io_free_rsrc_node+0x250/0x57c
[ 108.184345][ T14] io_rsrc_data_free+0x148/0x298
[ 108.186493][ T14] io_sqe_buffers_unregister+0x84/0xa0
[ 108.188991][ T14] io_ring_ctx_free+0x48/0x480
[ 108.191057][ T14] io_ring_exit_work+0x764/0x7d8
[ 108.193207][ T14] process_one_work+0x7e8/0x155c
[ 108.195431][ T14] worker_thread+0x958/0xed8
[ 108.197561][ T14] kthread+0x5fc/0x75c
[ 108.199362][ T14] ret_from_fork+0x10/0x20
We can pin a tail page of a folio, but then io_uring will try to unpin
the head page of the folio. While it should be fine in terms of keeping
the page actually alive, mm folks say it's wrong and triggers a debug
warning. Use unpin_user_folio() instead of unpin_user_page*.
[axboe: adapt to current tree, massage commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a7xx: Call CP_RESET_CONTEXT_STATE
Calling this packet is necessary when we switch contexts because there
are various pieces of state used by userspace to synchronize between BR
and BV that are persistent across submits and we need to make sure that
they are in a "safe" state when switching contexts. Otherwise a
userspace submission in one context could cause another context to
function incorrectly and hang, effectively a denial of service (although
without leaking data). This was missed during initial a7xx bringup.
Patchwork: https://patchwork.freedesktop.org/patch/654924/ |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
The platform profile driver is loaded even on platforms that do not have
ACPI enabled. The initialization of the sysfs entries was recently moved
from platform_profile_register() to the module init call, and those
entries need acpi_kobj to be initialized which is not the case when ACPI
is disabled.
This results in the following warning:
WARNING: CPU: 5 PID: 1 at fs/sysfs/group.c:131 internal_create_group+0xa22/0xdd8
Modules linked in:
CPU: 5 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.15.0-rc7-dirty #6 PREEMPT
Tainted: [W]=WARN
Hardware name: riscv-virtio,qemu (DT)
epc : internal_create_group+0xa22/0xdd8
ra : internal_create_group+0xa22/0xdd8
Call Trace:
internal_create_group+0xa22/0xdd8
sysfs_create_group+0x22/0x2e
platform_profile_init+0x74/0xb2
do_one_initcall+0x198/0xa9e
kernel_init_freeable+0x6d8/0x780
kernel_init+0x28/0x24c
ret_from_fork+0xe/0x18
Fix this by checking if ACPI is enabled before trying to create sysfs
entries.
[ rjw: Subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe()
The returned value, pfsm->miscdev.name, from devm_kasprintf()
could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: zynqmp_nvmem: unbreak driver after cleanup
Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup")
changed the driver to expect the device pointer to be passed as the
"context", but in nvmem the context parameter comes from nvmem_config.priv
which is never set - Leading to null pointer exceptions when the device is
accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: EM: Fix potential division-by-zero error in em_compute_costs()
When the device is of a non-CPU type, table[i].performance won't be
initialized in the previous em_init_performance(), resulting in division
by zero when calculating costs in em_compute_costs().
Since the 'cost' algorithm is only used for EAS energy efficiency
calculations and is currently not utilized by other device drivers, we
should add the _is_cpu_device(dev) check to prevent this division-by-zero
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
Commit e0573444edbf ("firmware: arm_ffa: Add interfaces to request
notification callbacks") adds support for notifier callbacks by allocating
and inserting a callback node into a hashtable during registration of
notifiers. However, during unregistration, the code only removes the
node from the hashtable without freeing the associated memory, resulting
in a memory leak.
Resolve the memory leak issue by ensuring the allocated notifier callback
node is properly freed after it is removed from the hashtable entry. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
The current use of a mutex to protect the notifier hashtable accesses
can lead to issues in the atomic context. It results in the below
kernel warnings:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4
| Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x78/0x90
| dump_stack+0x18/0x24
| __might_resched+0x114/0x170
| __might_sleep+0x48/0x98
| mutex_lock+0x24/0x80
| handle_notif_callbacks+0x54/0xe0
| notif_get_and_handle+0x40/0x88
| generic_exec_single+0x80/0xc0
| smp_call_function_single+0xfc/0x1a0
| notif_pcpu_irq_work_fn+0x2c/0x38
| process_one_work+0x14c/0x2b4
| worker_thread+0x2e4/0x3e0
| kthread+0x13c/0x210
| ret_from_fork+0x10/0x20
To address this, replace the mutex with an rwlock to protect the notifier
hashtable accesses. This ensures that read-side locking does not sleep and
multiple readers can acquire the lock concurrently, avoiding unnecessary
contention and potential deadlocks. Writer access remains exclusive,
preserving correctness.
This change resolves warnings from lockdep about potential sleep in
atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix data race in show_numa_info()
The following data-race was found in show_numa_info():
==================================================================
BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_show
read to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0:
show_numa_info mm/vmalloc.c:4936 [inline]
vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1:
show_numa_info mm/vmalloc.c:4934 [inline]
vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016
seq_read_iter+0x373/0xb40 fs/seq_file.c:230
proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299
....
value changed: 0x0000008f -> 0x00000000
==================================================================
According to this report,there is a read/write data-race because
m->private is accessible to multiple CPUs. To fix this, instead of
allocating the heap in proc_vmalloc_init() and passing the heap address to
m->private, vmalloc_info_show() should allocate the heap. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated
via devm_kzalloc() to store touch bar keyboard related data.
Later on if backlight_device_get_by_name() finds a backlight device
with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup
with appletb_inactivity_timer() and the timer is armed to run after
appletb_tb_dim_timeout (60) seconds.
A use-after-free is triggered when failure occurs after the timer is
armed. This ultimately means probe failure occurs and as a result the
"struct appletb_kbd *kbd" which is device managed memory is freed.
After 60 seconds the timer will have expired and __run_timers will
attempt to access the timer (kbd->inactivity_timer) however the kdb
structure has been freed causing a use-after free.
[ 71.636938] ==================================================================
[ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890
[ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0
[ 71.637915]
[ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary)
[ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 71.637915] Call Trace:
[ 71.637915] <IRQ>
[ 71.637915] dump_stack_lvl+0x53/0x70
[ 71.637915] print_report+0xce/0x670
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] kasan_report+0xce/0x100
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] __run_timers+0x7ad/0x890
[ 71.637915] ? __pfx___run_timers+0x10/0x10
[ 71.637915] ? update_process_times+0xfc/0x190
[ 71.637915] ? __pfx_update_process_times+0x10/0x10
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 71.637915] run_timer_softirq+0x141/0x240
[ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10
[ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10
[ 71.637915] ? kvm_clock_get_cycles+0x18/0x30
[ 71.637915] ? ktime_get+0x60/0x140
[ 71.637915] handle_softirqs+0x1b8/0x5c0
[ 71.637915] ? __pfx_handle_softirqs+0x10/0x10
[ 71.637915] irq_exit_rcu+0xaf/0xe0
[ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80
[ 71.637915] </IRQ>
[ 71.637915]
[ 71.637915] Allocated by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] __kasan_kmalloc+0x8f/0xa0
[ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 71.637915] devm_kmalloc+0x74/0x1e0
[ 71.637915] appletb_kbd_probe+0x37/0x3c0
[ 71.637915] hid_device_probe+0x2d1/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
[ 71.637915]
[ 71.637915] Freed by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] kasan_save_free_info+0x3b/0x60
[ 71.637915] __kasan_slab_free+0x37/0x50
[ 71.637915] kfree+0xcf/0x360
[ 71.637915] devres_release_group+0x1f8/0x3c0
[ 71.637915] hid_device_probe+0x315/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
The root cause of the issue is that the timer is not disarmed
on failure paths leading to it remaining active and accessing
freed memory. To fix this call timer_delete_sync() to deactivate
the timer.
Another small issue is that timer_delete_sync is called
unconditionally in appletb_kbd_remove(), fix this by checking
for a valid kbd->backlight_dev before calling timer_delete_sync. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
Shawn and John reported a hang issue during system suspend as below:
- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)
The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.
The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.
To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability. |
