| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Information Exposure Through Query Strings in GET Request vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Session Hijacking.This issue affects DX NetOps Spectrum: 24.3.8 and earlier. |
| Insufficiently Protected Credentials vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Sniffing Attacks.This issue affects DX NetOps Spectrum: 24.3.13 and earlier. |
| Cleartext Transmission of Sensitive Information vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Sniffing Attacks.This issue affects DX NetOps Spectrum: 21.2.1 and earlier. |
| Improper Authentication vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Authentication Bypass.This issue affects DX NetOps Spectrum: 24.3.10 and earlier. |
| Authorization Bypass Through User-Controlled Key vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Privilege Escalation.This issue affects DX NetOps Spectrum: 24.3.10 and earlier. |
| Dependency on Vulnerable Third-Party Component vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows DOM-Based XSS.This issue affects DX NetOps Spectrum: 24.3.9 and earlier. |
| Deserialization of Untrusted Data vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows Object Injection.This issue affects DX NetOps Spectrum: 24.3.13 and earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "fs/ntfs3: Replace inode_trylock with inode_lock"
This reverts commit 69505fe98f198ee813898cbcaf6770949636430b.
Initially, conditional lock acquisition was removed to fix an xfstest bug
that was observed during internal testing. The deadlock reported by syzbot
is resolved by reintroducing conditional acquisition. The xfstest bug no
longer occurs on kernel version 6.16-rc1 during internal testing. I
assume that changes in other modules may have contributed to this. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Remove the direct link to net_device
The similar patch in siw is in the link:
https://git.kernel.org/rdma/rdma/c/16b87037b48889
This problem also occurred in RXE. The following analyze this problem.
In the following Call Traces:
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295
CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted
6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
Workqueue: infiniband ib_cache_event_task
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60
__ib_query_port drivers/infiniband/core/device.c:2111 [inline]
ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143
ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494
ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
"
1). In the link [1],
"
infiniband syz2: set down
"
This means that on 839.350575, the event ib_cache_event_task was sent andi
queued in ib_wq.
2). In the link [1],
"
team0 (unregistering): Port device team_slave_0 removed
"
It indicates that before 843.251853, the net device should be freed.
3). In the link [1],
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0
"
This means that on 850.559070, this slab-use-after-free problem occurred.
In all, on 839.350575, the event ib_cache_event_task was sent and queued
in ib_wq,
before 843.251853, the net device veth was freed.
on 850.559070, this event was executed, and the mentioned freed net device
was called. Thus, the above call trace occurred.
[1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid possible NULL deref in modify_prefix_route()
syzbot found a NULL deref [1] in modify_prefix_route(), caused by one
fib6_info without a fib6_table pointer set.
This can happen for net->ipv6.fib6_null_entry
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089
Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84
RSP: 0018:ffffc900035d7268 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030
R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5849
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x33/0x40 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
modify_prefix_route+0x30b/0x8b0 net/ipv6/addrconf.c:4831
inet6_addr_modify net/ipv6/addrconf.c:4923 [inline]
inet6_rtm_newaddr+0x12c7/0x1ab0 net/ipv6/addrconf.c:5055
rtnetlink_rcv_msg+0x3c7/0xea0 net/core/rtnetlink.c:6920
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2541
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
____sys_sendmsg+0xaaf/0xc90 net/socket.c:2583
___sys_sendmsg+0x135/0x1e0 net/socket.c:2637
__sys_sendmsg+0x16e/0x220 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fd1dcef8b79
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc59cc4378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd1dcef8b79
RDX: 0000000000040040 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 00000000000113fd R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 00007ffc59cc438c
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: setup queue ->tag_set before initializing hctx
Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
needs to check queue mapping via tag set in hctx's cpuhp handler.
However, q->tag_set may not be setup yet when the cpuhp handler is
enabled, then kernel oops is triggered.
Fix the issue by setup queue tag_set before initializing hctx. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix KMSAN uninit-value in extent_info usage
KMSAN reported a use of uninitialized value in `__is_extent_mergeable()`
and `__is_back_mergeable()` via the read extent tree path.
The root cause is that `get_read_extent_info()` only initializes three
fields (`fofs`, `blk`, `len`) of `struct extent_info`, leaving the
remaining fields uninitialized. This leads to undefined behavior
when those fields are accessed later, especially during
extent merging.
Fix it by zero-initializing the `extent_info` struct before population. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: xilinx: vcu: unregister pll_post only if registered correctly
If registration of pll_post is failed, it will be set to NULL or ERR,
unregistering same will fail with following call trace:
Unable to handle kernel NULL pointer dereference at virtual address 008
pc : clk_hw_unregister+0xc/0x20
lr : clk_hw_unregister_fixed_factor+0x18/0x30
sp : ffff800011923850
...
Call trace:
clk_hw_unregister+0xc/0x20
clk_hw_unregister_fixed_factor+0x18/0x30
xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu]
xvcu_probe+0x2bc/0x53c [xlnx_vcu] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: reject malicious packets in ipv6_gso_segment()
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget : fix use-after-free in composite_dev_cleanup()
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: vm_unmap_ram() may be called from an invalid context
When testing F2FS with xfstests using UFS backed virtual disks the
kernel complains sometimes that f2fs_release_decomp_mem() calls
vm_unmap_ram() from an invalid context. Example trace from
f2fs/007 test:
f2fs/007 5s ... [12:59:38][ 8.902525] run fstests f2fs/007
[ 11.468026] BUG: sleeping function called from invalid context at mm/vmalloc.c:2978
[ 11.471849] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 68, name: irq/22-ufshcd
[ 11.475357] preempt_count: 1, expected: 0
[ 11.476970] RCU nest depth: 0, expected: 0
[ 11.478531] CPU: 0 UID: 0 PID: 68 Comm: irq/22-ufshcd Tainted: G W 6.16.0-rc5-xfstests-ufs-g40f92e79b0aa #9 PREEMPT(none)
[ 11.478535] Tainted: [W]=WARN
[ 11.478536] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 11.478537] Call Trace:
[ 11.478543] <TASK>
[ 11.478545] dump_stack_lvl+0x4e/0x70
[ 11.478554] __might_resched.cold+0xaf/0xbe
[ 11.478557] vm_unmap_ram+0x21/0xb0
[ 11.478560] f2fs_release_decomp_mem+0x59/0x80
[ 11.478563] f2fs_free_dic+0x18/0x1a0
[ 11.478565] f2fs_finish_read_bio+0xd7/0x290
[ 11.478570] blk_update_request+0xec/0x3b0
[ 11.478574] ? sbitmap_queue_clear+0x3b/0x60
[ 11.478576] scsi_end_request+0x27/0x1a0
[ 11.478582] scsi_io_completion+0x40/0x300
[ 11.478583] ufshcd_mcq_poll_cqe_lock+0xa3/0xe0
[ 11.478588] ufshcd_sl_intr+0x194/0x1f0
[ 11.478592] ufshcd_threaded_intr+0x68/0xb0
[ 11.478594] ? __pfx_irq_thread_fn+0x10/0x10
[ 11.478599] irq_thread_fn+0x20/0x60
[ 11.478602] ? __pfx_irq_thread_fn+0x10/0x10
[ 11.478603] irq_thread+0xb9/0x180
[ 11.478605] ? __pfx_irq_thread_dtor+0x10/0x10
[ 11.478607] ? __pfx_irq_thread+0x10/0x10
[ 11.478609] kthread+0x10a/0x230
[ 11.478614] ? __pfx_kthread+0x10/0x10
[ 11.478615] ret_from_fork+0x7e/0xd0
[ 11.478619] ? __pfx_kthread+0x10/0x10
[ 11.478621] ret_from_fork_asm+0x1a/0x30
[ 11.478623] </TASK>
This patch modifies in_task() check inside f2fs_read_end_io() to also
check if interrupts are disabled. This ensures that pages are unmapped
asynchronously in an interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: aio_iiro_16: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl812: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: nbpfaxi: Fix memory corruption in probe()
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result. |
