| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix recursive semaphore deadlock in fiemap call
syzbot detected a OCFS2 hang due to a recursive semaphore on a
FS_IOC_FIEMAP of the extent list on a specially crafted mmap file.
context_switch kernel/sched/core.c:5357 [inline]
__schedule+0x1798/0x4cc0 kernel/sched/core.c:6961
__schedule_loop kernel/sched/core.c:7043 [inline]
schedule+0x165/0x360 kernel/sched/core.c:7058
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115
rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185
__down_write_common kernel/locking/rwsem.c:1317 [inline]
__down_write kernel/locking/rwsem.c:1326 [inline]
down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591
ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142
do_page_mkwrite+0x14d/0x310 mm/memory.c:3361
wp_page_shared mm/memory.c:3762 [inline]
do_wp_page+0x268d/0x5800 mm/memory.c:3981
handle_pte_fault mm/memory.c:6068 [inline]
__handle_mm_fault+0x1033/0x5440 mm/memory.c:6195
handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364
do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387
handle_page_fault arch/x86/mm/fault.c:1476 [inline]
exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532
asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623
RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline]
RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline]
RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline]
RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26
Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89
f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 <f3> a4 0f
1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41
RSP: 0018:ffffc9000403f950 EFLAGS: 00050256
RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038
RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060
RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42
R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098
R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060
copy_to_user include/linux/uaccess.h:225 [inline]
fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145
ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806
ioctl_fiemap fs/ioctl.c:220 [inline]
do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532
__do_sys_ioctl fs/ioctl.c:596 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f13850fd9
RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9
RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004
RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0
R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b
ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since
v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the
extent list of this running mmap executable. The user supplied buffer to
hold the fiemap information page faults calling ocfs2_page_mkwrite() which
will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same
semaphore. This recursive semaphore will hold filesystem locks and causes
a hang of the fileystem.
The ip_alloc_sem protects the inode extent list and size. Release the
read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap()
and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock
on the last extent but simplifies the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: Fix UAF in polling when open file is released
A use-after-free (UAF) vulnerability was identified in the PSI (Pressure
Stall Information) monitoring mechanism:
BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140
Read of size 8 at addr ffff3de3d50bd308 by task systemd/1
psi_trigger_poll+0x3c/0x140
cgroup_pressure_poll+0x70/0xa0
cgroup_file_poll+0x8c/0x100
kernfs_fop_poll+0x11c/0x1c0
ep_item_poll.isra.0+0x188/0x2c0
Allocated by task 1:
cgroup_file_open+0x88/0x388
kernfs_fop_open+0x73c/0xaf0
do_dentry_open+0x5fc/0x1200
vfs_open+0xa0/0x3f0
do_open+0x7e8/0xd08
path_openat+0x2fc/0x6b0
do_filp_open+0x174/0x368
Freed by task 8462:
cgroup_file_release+0x130/0x1f8
kernfs_drain_open_files+0x17c/0x440
kernfs_drain+0x2dc/0x360
kernfs_show+0x1b8/0x288
cgroup_file_show+0x150/0x268
cgroup_pressure_write+0x1dc/0x340
cgroup_file_write+0x274/0x548
Reproduction Steps:
1. Open test/cpu.pressure and establish epoll monitoring
2. Disable monitoring: echo 0 > test/cgroup.pressure
3. Re-enable monitoring: echo 1 > test/cgroup.pressure
The race condition occurs because:
1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it:
- Releases PSI triggers via cgroup_file_release()
- Frees of->priv through kernfs_drain_open_files()
2. While epoll still holds reference to the file and continues polling
3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv
epolling disable/enable cgroup.pressure
fd=open(cpu.pressure)
while(1)
...
epoll_wait
kernfs_fop_poll
kernfs_get_active = true echo 0 > cgroup.pressure
... cgroup_file_show
kernfs_show
// inactive kn
kernfs_drain_open_files
cft->release(of);
kfree(ctx);
...
kernfs_get_active = false
echo 1 > cgroup.pressure
kernfs_show
kernfs_activate_one(kn);
kernfs_fop_poll
kernfs_get_active = true
cgroup_file_poll
psi_trigger_poll
// UAF
...
end: close(fd)
To address this issue, introduce kernfs_get_active_of() for kernfs open
files to obtain active references. This function will fail if the open file
has been released. Replace kernfs_get_active() with kernfs_get_active_of()
to prevent further operations on released file descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix resolving backrefs for inline extent followed by prealloc
If a file consists of an inline extent followed by a regular or prealloc
extent, then a legitimate attempt to resolve a logical address in the
non-inline region will result in add_all_parents reading the invalid
offset field of the inline extent. If the inline extent item is placed
in the leaf eb s.t. it is the first item, attempting to access the
offset field will not only be meaningless, it will go past the end of
the eb and cause this panic:
[17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8
[17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI
[17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199
[17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110
[17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202
[17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000
[17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001
[17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff
[17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918
[17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd
[17.663617] FS: 00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000
[17.666525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0
[17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[17.676034] PKRU: 55555554
[17.677004] Call Trace:
[17.677877] add_all_parents+0x276/0x480
[17.679325] find_parent_nodes+0xfae/0x1590
[17.680771] btrfs_find_all_leafs+0x5e/0xa0
[17.682217] iterate_extent_inodes+0xce/0x260
[17.683809] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.685597] ? iterate_inodes_from_logical+0xa1/0xd0
[17.687404] iterate_inodes_from_logical+0xa1/0xd0
[17.689121] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.691010] btrfs_ioctl_logical_to_ino+0x131/0x190
[17.692946] btrfs_ioctl+0x104a/0x2f60
[17.694384] ? selinux_file_ioctl+0x182/0x220
[17.695995] ? __x64_sys_ioctl+0x84/0xc0
[17.697394] __x64_sys_ioctl+0x84/0xc0
[17.698697] do_syscall_64+0x33/0x40
[17.700017] entry_SYSCALL_64_after_hwframe+0x44/0xae
[17.701753] RIP: 0033:0x7f64e72761b7
[17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7
[17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003
[17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60
[17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001
[17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0
[17.724839] Modules linked in:
Fix the bug by detecting the inline extent item in add_all_parents and
skipping to the next extent item. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: cdev: fix NULL-pointer dereferences
There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().
While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).
This affects both v1 and v2 uAPI.
This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cake: fix null pointer access issue when cake_init() fails
When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix memory leak on ntfs_fill_super() error path
syzbot reported kmemleak as below:
BUG: memory leak
unreferenced object 0xffff8880122f1540 (size 32):
comm "a.out", pid 6664, jiffies 4294939771 (age 25.500s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 ed ff ed ff 00 00 00 00 ................
backtrace:
[<ffffffff81b16052>] ntfs_init_fs_context+0x22/0x1c0
[<ffffffff8164aaa7>] alloc_fs_context+0x217/0x430
[<ffffffff81626dd4>] path_mount+0x704/0x1080
[<ffffffff81627e7c>] __x64_sys_mount+0x18c/0x1d0
[<ffffffff84593e14>] do_syscall_64+0x34/0xb0
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes this issue by freeing mount options on error path of
ntfs_fill_super(). |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()
In rtw_init_drv_sw(), there are various init functions are called to
populate the padapter structure and some checks for their return value.
However, except for the first one error path, the other five error paths
do not properly release the previous allocated resources, which leads to
various memory leaks.
This patch fixes them and keeps the success and error separate.
Note that these changes keep the form of `rtw_init_drv_sw()` in
"drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device
to test with, no runtime testing was performed. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID
An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to
lpfc_nlp_put() with a null pointer to a nodelist structure.
Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon
entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix leaking uninitialized memory in fast-commit journal
When space at the end of fast-commit journal blocks is unused, make sure
to zero it out so that uninitialized memory is not leaked to disk. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/52xx: Fix a resource leak in an error handling path
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: vpe-mt: fix possible memory leak while module exiting
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
it need be freed when module exiting, call put_device() to give up
reference, so that it can be freed in kobject_cleanup() when the
refcount hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release(). |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software documentation. This potential vulnerability is due to the use of a weak code signing key, Digital Signature Algorithm (DSA). |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: add lock for serializing concurrent pl->phydev writes with resolver
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: kexec: initialize kexec_buf struct in load_other_segments()
Patch series "kexec: Fix invalid field access".
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are cleanly
set, preventing future instances of uninitialized memory being used.
An initial fix was already landed for arm64[0], and this patchset fixes
the problem on the remaining arm64 code and on riscv, as raised by Mark.
Discussions about this problem could be found at[1][2].
This patch (of 3):
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used. |
| In the Linux kernel, the following vulnerability has been resolved:
of_numa: fix uninitialized memory nodes causing kernel panic
When there are memory-only nodes (nodes without CPUs), these nodes are not
properly initialized, causing kernel panic during boot.
of_numa_init
of_numa_parse_cpu_nodes
node_set(nid, numa_nodes_parsed);
of_numa_parse_memory_nodes
In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes
containing CPUs. Memory-only nodes should have been updated in
of_numa_parse_memory_nodes, but they weren't.
Subsequently, when free_area_init() attempts to access NODE_DATA() for
these uninitialized memory nodes, the kernel panics due to NULL pointer
dereference.
This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes:
qemu-system-aarch64 \
-cpu host -nographic \
-m 4G -smp 1 \
-machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \
-object memory-backend-ram,size=2G,id=mem0 \
-object memory-backend-ram,size=2G,id=mem1 \
-numa node,nodeid=0,memdev=mem0 \
-numa node,nodeid=1,memdev=mem1 \
-kernel $IMAGE \
-hda $DISK \
-append "console=ttyAMA0 root=/dev/vda rw earlycon"
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: linux,dummy-virt
[ 0.000000] efi: UEFI not found.
[ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff]
[ 0.000000] node 1 must be removed before remove section 23
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x0000000096000004
[ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] FSC = 0x04: level 0 translation fault
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.000000] [00000000000000a0] user address but active_mm is swapper
[ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT
[ 0.000000] Hardware name: linux,dummy-virt (DT)
[ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.000000] pc : free_area_init+0x50c/0xf9c
[ 0.000000] lr : free_area_init+0x5c0/0xf9c
[ 0.000000] sp : ffffa02ca0f33c00
[ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000
[ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000
[ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368
[ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002
[ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001
[ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002
[ 0.0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y
syzbot reported a WARNING in est_timer() [1]
Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks
can be preempted.
Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.
[1]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline]
WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline]
RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93
Call Trace:
<TASK>
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22c/0x710 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1043
smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using
kmap_local_page(), which requires unmapping in Last-In-First-Out order.
The current code maps dst_pte first, then src_pte, but unmaps them in the
same order (dst_pte, src_pte), violating the LIFO requirement. This
causes the warning in kunmap_local_indexed():
WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c
addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx)
Fix this by reversing the unmap order to respect LIFO ordering.
This issue follows the same pattern as similar fixes:
- commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order")
- commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename")
Both of which addressed the same fundamental requirement that kmap_local
operations must follow LIFO ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Prevent recovery work from being queued during device removal
Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()
to ensure that no new recovery work items can be queued after device
removal has started. Previously, recovery work could be scheduled even
after canceling existing work, potentially leading to use-after-free
bugs if recovery accessed freed resources.
Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better
reflect its new behavior. |
