| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
When devm_add_action_or_reset() fails, it calls the passed cleanup
function. Hence the caller must not repeat that cleanup.
Replace the "goto err_regulator_free" by the actual freeing, as there
will never be a need again for a second user of this label. |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid NULL pointer dereference in f2fs_check_quota_consistency()
syzbot reported a f2fs bug as below:
Oops: gen[ 107.736417][ T5848] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 5848 Comm: syz-executor263 Tainted: G W 6.17.0-rc1-syzkaller-00014-g0e39a731820a #0 PREEMPT_{RT,(full)}
RIP: 0010:strcmp+0x3c/0xc0 lib/string.c:284
Call Trace:
<TASK>
f2fs_check_quota_consistency fs/f2fs/super.c:1188 [inline]
f2fs_check_opt_consistency+0x1378/0x2c10 fs/f2fs/super.c:1436
__f2fs_remount fs/f2fs/super.c:2653 [inline]
f2fs_reconfigure+0x482/0x1770 fs/f2fs/super.c:5297
reconfigure_super+0x224/0x890 fs/super.c:1077
do_remount fs/namespace.c:3314 [inline]
path_mount+0xd18/0xfe0 fs/namespace.c:4112
do_mount fs/namespace.c:4133 [inline]
__do_sys_mount fs/namespace.c:4344 [inline]
__se_sys_mount+0x317/0x410 fs/namespace.c:4321
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The direct reason is f2fs_check_quota_consistency() may suffer null-ptr-deref
issue in strcmp().
The bug can be reproduced w/ below scripts:
mkfs.f2fs -f /dev/vdb
mount -t f2fs -o usrquota /dev/vdb /mnt/f2fs
quotacheck -uc /mnt/f2fs/
umount /mnt/f2fs
mount -t f2fs -o usrjquota=aquota.user,jqfmt=vfsold /dev/vdb /mnt/f2fs
mount -t f2fs -o remount,usrjquota=,jqfmt=vfsold /dev/vdb /mnt/f2fs
umount /mnt/f2fs
So, before old_qname and new_qname comparison, we need to check whether
they are all valid pointers, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because
rxcb->peer_id is not updated with a valid value. This is expected
in monitor mode, where RX frames bypass the regular RX
descriptor path that typically sets rxcb->peer_id.
As a result, the peer is NULL, and link_id and link_valid fields
in the RX status are not populated. This leads to a WARN_ON in
mac80211 when it receives data frame from an associated station
with invalid link_id.
Fix this potential issue by using ppduinfo->peer_id, which holds
the correct peer id for the received frame. This ensures that the
peer is correctly found and the associated link metadata is updated
accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+) |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it. |
| In the Linux kernel, the following vulnerability has been resolved:
vfat: fix missing sb_min_blocksize() return value checks
When emulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, but without format, a kernel panic
was triggered during the early boot stage while attempting to mount a
vfat filesystem.
[95553.682035] EXT4-fs (nvme0n1): unable to set blocksize
[95553.684326] EXT4-fs (nvme0n1): unable to set blocksize
[95553.686501] EXT4-fs (nvme0n1): unable to set blocksize
[95553.696448] ISOFS: unsupported/invalid hardware sector size 8192
[95553.697117] ------------[ cut here ]------------
[95553.697567] kernel BUG at fs/buffer.c:1582!
[95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary)
[95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0
[95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f
[95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246
[95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001
[95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000
[95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000
[95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000
[95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000
[95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0
[95553.708439] PKRU: 55555554
[95553.708734] Call Trace:
[95553.709015] <TASK>
[95553.709266] __getblk_slow+0xd2/0x230
[95553.709641] ? find_get_block_common+0x8b/0x530
[95553.710084] bdev_getblk+0x77/0xa0
[95553.710449] __bread_gfp+0x22/0x140
[95553.710810] fat_fill_super+0x23a/0xfc0
[95553.711216] ? __pfx_setup+0x10/0x10
[95553.711580] ? __pfx_vfat_fill_super+0x10/0x10
[95553.712014] vfat_fill_super+0x15/0x30
[95553.712401] get_tree_bdev_flags+0x141/0x1e0
[95553.712817] get_tree_bdev+0x10/0x20
[95553.713177] vfat_get_tree+0x15/0x20
[95553.713550] vfs_get_tree+0x2a/0x100
[95553.713910] vfs_cmd_create+0x62/0xf0
[95553.714273] __do_sys_fsconfig+0x4e7/0x660
[95553.714669] __x64_sys_fsconfig+0x20/0x40
[95553.715062] x64_sys_call+0x21ee/0x26a0
[95553.715453] do_syscall_64+0x80/0x670
[95553.715816] ? __fs_parse+0x65/0x1e0
[95553.716172] ? fat_parse_param+0x103/0x4b0
[95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0
[95553.717034] ? __do_sys_fsconfig+0x3d9/0x660
[95553.717548] ? __x64_sys_fsconfig+0x20/0x40
[95553.717957] ? x64_sys_call+0x21ee/0x26a0
[95553.718360] ? do_syscall_64+0xb8/0x670
[95553.718734] ? __x64_sys_fsconfig+0x20/0x40
[95553.719141] ? x64_sys_call+0x21ee/0x26a0
[95553.719545] ? do_syscall_64+0xb8/0x670
[95553.719922] ? x64_sys_call+0x1405/0x26a0
[95553.720317] ? do_syscall_64+0xb8/0x670
[95553.720702] ? __x64_sys_close+0x3e/0x90
[95553.721080] ? x64_sys_call+0x1b5e/0x26a0
[95553.721478] ? do_syscall_64+0xb8/0x670
[95553.721841] ? irqentry_exit+0x43/0x50
[95553.722211] ? exc_page_fault+0x90/0x1b0
[95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[95553.723166] RIP: 0033:0x72ee774f3afe
[95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48
[95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
[95553.725892] RAX: ffffffffffffffda RBX:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
When running perf_fuzzer on PTL, sometimes the below "unchecked MSR
access error" is seen when accessing IA32_PMC_x_CFG_B MSRs.
[ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30)
[ 55.611280] Call Trace:
[ 55.611282] <TASK>
[ 55.611284] ? intel_pmu_config_acr+0x87/0x160
[ 55.611289] intel_pmu_enable_acr+0x6d/0x80
[ 55.611291] intel_pmu_enable_event+0xce/0x460
[ 55.611293] x86_pmu_start+0x78/0xb0
[ 55.611297] x86_pmu_enable+0x218/0x3a0
[ 55.611300] ? x86_pmu_enable+0x121/0x3a0
[ 55.611302] perf_pmu_enable+0x40/0x50
[ 55.611307] ctx_resched+0x19d/0x220
[ 55.611309] __perf_install_in_context+0x284/0x2f0
[ 55.611311] ? __pfx_remote_function+0x10/0x10
[ 55.611314] remote_function+0x52/0x70
[ 55.611317] ? __pfx_remote_function+0x10/0x10
[ 55.611319] generic_exec_single+0x84/0x150
[ 55.611323] smp_call_function_single+0xc5/0x1a0
[ 55.611326] ? __pfx_remote_function+0x10/0x10
[ 55.611329] perf_install_in_context+0xd1/0x1e0
[ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10
[ 55.611333] __do_sys_perf_event_open+0xa76/0x1040
[ 55.611336] __x64_sys_perf_event_open+0x26/0x30
[ 55.611337] x64_sys_call+0x1d8e/0x20c0
[ 55.611339] do_syscall_64+0x4f/0x120
[ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix potential null deref in ext4_mb_init()
In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called
when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo
slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy()
lacks null pointer checking, this leads to a null pointer dereference.
==================================================================
EXT4-fs: no memory for groupinfo slab cache
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP PTI
CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none)
RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40
Call Trace:
<TASK>
xa_destroy+0x61/0x130
ext4_mb_init+0x483/0x540
__ext4_fill_super+0x116d/0x17b0
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
do_new_mount+0x197/0x300
__x64_sys_mount+0x116/0x150
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy()
to prevent this issue. The same fix is also applied to
ext4_mb_largest_free_orders_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()
The ethtool tsconfig Netlink path can trigger a null pointer
dereference. A call chain such as:
tsconfig_prepare_data() ->
dev_get_hwtstamp_phylib() ->
vlan_hwtstamp_get() ->
generic_hwtstamp_get_lower() ->
generic_hwtstamp_ioctl_lower()
results in generic_hwtstamp_ioctl_lower() being called with
kernel_cfg->ifr as NULL.
The generic_hwtstamp_ioctl_lower() function does not expect
a NULL ifr and dereferences it, leading to a system crash.
Fix this by adding a NULL check for kernel_cfg->ifr in
generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: pretend $Extend records as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
During mpt3sas_transport_port_remove(), messages were logged with
dev_printk() against &mpt3sas_port->port->dev. At this point the SAS
transport device may already be partially unregistered or freed, leading
to a crash when accessing its struct device.
Using ioc_info(), which logs via the PCI device (ioc->pdev->dev),
guaranteed to remain valid until driver removal.
[83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI
[83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary)
[83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024
[83428.295799] RIP: 0010:__dev_printk+0x1f/0x70
[83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff
[83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206
[83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32
[83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845
[83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8
[83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000
[83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30
[83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000
[83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0
[83428.295844] PKRU: 55555554
[83428.295846] Call Trace:
[83428.295848] <TASK>
[83428.295850] _dev_printk+0x5c/0x80
[83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas]
[83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas]
[83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas]
[83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas]
[83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas]
[83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas]
[83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas]
[83428.295957] pci_device_remove+0x3b/0xb0
[83428.295962] device_release_driver_internal+0x193/0x200
[83428.295968] driver_detach+0x44/0x90
[83428.295971] bus_remove_driver+0x69/0xf0
[83428.295975] pci_unregister_driver+0x2a/0xb0
[83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas]
[83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310
[83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296000] ? __x64_sys_getdents64+0x9a/0x110
[83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296009] ? syscall_trace_enter+0xf6/0x1b0
[83428.296014] do_syscall_64+0x7b/0x2c0
[83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5
[83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: act_connmark: initialize struct tc_ife to fix kernel leak
In tcf_connmark_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied. |
