Export limit exceeded: 421604 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26198 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50825 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. | ||||
| CVE-2022-50826 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection() Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose() with a subdev state of NULL leads to a NULL pointer dereference. This can currently happen in imgu_subdev_set_selection() when the state passed in is NULL, as this method first gets pointers to both the "try" and "active" states and only then decides which to use. The same issue has been addressed for imgu_subdev_get_selection() with commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active selection access"). However the issue still persists in imgu_subdev_set_selection(). Therefore, apply a similar fix as done in the aforementioned commit to imgu_subdev_set_selection(). To keep things a bit cleaner, introduce helper functions for "crop" and "compose" access and use them in both imgu_subdev_set_selection() and imgu_subdev_get_selection(). | ||||
| CVE-2022-50827 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_create_port() Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox command") introduced allocations for the VMID resources in lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the VMID allocations, the new code would branch to the 'out' label, which returns NULL without unwinding anything, thus skipping the call to scsi_host_put(). Fix the problem by creating a separate label 'out_free_vmid' to unwind the VMID resources and make the 'out_put_shost' label call only scsi_host_put(), as was done before the introduction of allocations for VMID. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50829 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb() It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak. The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2022-50830 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: hd44780: Fix potential memory leak in hd44780_remove() hd44780_probe() allocates a memory chunk for hd with kzalloc() and makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(), we should release all relevant memory and resource. But "lcd->drvdata ->hd44780" is not released, which will lead to a memory leak. We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix the memory leak bug. | ||||
| CVE-2022-50837 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path If dsa_tag_8021q_setup() fails, for example due to the inability of the device to install a VLAN, the tag_8021q context of the switch will leak. Make sure it is freed on the error path. | ||||
| CVE-2022-50761 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/xen: Fix memory leak in xen_init_lock_cpu() In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(), if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead to a memory leak issue, fix it. | ||||
| CVE-2022-50698 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section. | ||||
| CVE-2022-50768 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Correct device removal for multi-actuator devices Correct device count for multi-actuator drives which can cause kernel panics. | ||||
| CVE-2022-50702 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() Inject fault while probing module, if device_register() fails in vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). (vdpa_sim_net) unreferenced object 0xffff88807eebc370 (size 16): comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5 vdpasim_net.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0270013>] 0xffffffffa0270013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (vdpa_sim_blk) unreferenced object 0xffff8881070c1250 (size 16): comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5 vdpasim_blk.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0220013>] 0xffffffffa0220013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2022-50704 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: Fix use-after-free during usb config switch In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free). The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior. Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none" gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 (2) rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc (3) rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14 kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. ======================================================================= | ||||
| CVE-2022-50740 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2022-50678 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix invalid address access when enabling SCAN log level The variable i is changed when setting random MAC address and causes invalid address access when printing the value of pi->reqs[i]->reqid. We replace reqs index with ri to fix the issue. [ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ 136.737365] Mem abort info: [ 136.740172] ESR = 0x96000004 [ 136.743359] Exception class = DABT (current EL), IL = 32 bits [ 136.749294] SET = 0, FnV = 0 [ 136.752481] EA = 0, S1PTW = 0 [ 136.755635] Data abort info: [ 136.758514] ISV = 0, ISS = 0x00000004 [ 136.762487] CM = 0, WnR = 0 [ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577 [ 136.772265] [0000000000000000] pgd=0000000000000000 [ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O) [ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb) [ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1 [ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT) [ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO) [ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac] [ 136.828162] sp : ffff00000e9a3880 [ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400 [ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0 [ 136.842098] x25: ffff80002054345c x24: ffff800088d22400 [ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8 [ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400 [ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000 [ 136.863343] x17: 0000000000000000 x16: 0000000000000000 [ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050 [ 136.873966] x13: 0000000000003135 x12: 0000000000000000 [ 136.879277] x11: 0000000000000000 x10: ffff000009a61888 [ 136.884589] x9 : 000000000000000f x8 : 0000000000000008 [ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d [ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942 [ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8 [ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000 [ 136.911146] Call trace: [ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac] [ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac] [ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac] [ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211] [ 136.937298] genl_rcv_msg+0x358/0x3f4 [ 136.940960] netlink_rcv_skb+0xb4/0x118 [ 136.944795] genl_rcv+0x34/0x48 [ 136.947935] netlink_unicast+0x264/0x300 [ 136.951856] netlink_sendmsg+0x2e4/0x33c [ 136.955781] __sys_sendto+0x120/0x19c | ||||
| CVE-2022-50677 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: fix use after free in _ipmi_destroy_user() The intf_free() function frees the "intf" pointer so we cannot dereference it again on the next line. | ||||
| CVE-2022-50705 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: defer fsnotify calls to task context We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3694e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 | ||||
| CVE-2022-50675 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE is untagged"), mte_sync_tags() was only called for pte_tagged() entries (those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently setting PG_mte_tagged on an untagged page. The above commit was required as guests may enable MTE without any control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM. However, the side-effect was that any page with a PTE that looked like swap (or migration) was getting PG_mte_tagged set automatically. A subsequent page copy (e.g. migration) copied the tags to the destination page even if the tags were owned by KASAN. This issue was masked by the page_kasan_tag_reset() call introduced in commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags"). When this commit was reverted (20794545c146), KASAN started reporting access faults because the overriding tags in a page did not match the original page->flags (with CONFIG_KASAN_HW_TAGS=y): BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26 Read at addr f5ff000017f2e000 by task syz-executor.1/2218 Pointer tag: [f5], memory tag: [f2] Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual place where tags are cleared (mte_sync_page_tags()) or restored (mte_restore_tags()). | ||||
| CVE-2022-50674 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. | ||||
| CVE-2022-50672 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynq-ipi: fix error handling while device_register() fails If device_register() fails, it has two issues: 1. The name allocated by dev_set_name() is leaked. 2. The parent of device is not NULL, device_unregister() is called in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because of removing not added device. Call put_device() to give up the reference, so the name is freed in kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes() to avoid null-ptr-deref. | ||||