Export limit exceeded: 421290 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26248 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23046 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix device mismatch in devm_kzalloc/devm_kfree Initial rss_hdr allocation uses virtio_device->device, but virtnet_set_queues() frees using net_device->device. This device mismatch causing below devres warning [ 3788.514041] ------------[ cut here ]------------ [ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463 [ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa] [ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT [ 3788.514067] Tainted: [W]=WARN [ 3788.514069] Hardware name: Marvell CN106XX board (DT) [ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) [ 3788.514074] pc : devm_kfree+0x84/0x98 [ 3788.514076] lr : devm_kfree+0x54/0x98 [ 3788.514079] sp : ffff800084e2f220 [ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f [ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080 [ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018 [ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000 [ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff [ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff [ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c [ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f [ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080 [ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000 [ 3788.514123] Call trace: [ 3788.514125] devm_kfree+0x84/0x98 (P) [ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net] [ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net] [ 3788.514139] virtio_dev_probe+0x1e0/0x338 [ 3788.514144] really_probe+0xc8/0x3a0 [ 3788.514149] __driver_probe_device+0x84/0x170 [ 3788.514152] driver_probe_device+0x44/0x120 [ 3788.514155] __device_attach_driver+0xc4/0x168 [ 3788.514158] bus_for_each_drv+0x8c/0xf0 [ 3788.514161] __device_attach+0xa4/0x1c0 [ 3788.514164] device_initial_probe+0x1c/0x30 [ 3788.514168] bus_probe_device+0xb4/0xc0 [ 3788.514170] device_add+0x614/0x828 [ 3788.514173] register_virtio_device+0x214/0x258 [ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa] [ 3788.514179] vdpa_dev_probe+0xa8/0xd8 [ 3788.514183] really_probe+0xc8/0x3a0 [ 3788.514186] __driver_probe_device+0x84/0x170 [ 3788.514189] driver_probe_device+0x44/0x120 [ 3788.514192] __device_attach_driver+0xc4/0x168 [ 3788.514195] bus_for_each_drv+0x8c/0xf0 [ 3788.514197] __device_attach+0xa4/0x1c0 [ 3788.514200] device_initial_probe+0x1c/0x30 [ 3788.514203] bus_probe_device+0xb4/0xc0 [ 3788.514206] device_add+0x614/0x828 [ 3788.514209] _vdpa_register_device+0x58/0x88 [ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa] [ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0 [ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158 [ 3788.514222] genl_rcv_msg+0x218/0x298 [ 3788.514225] netlink_rcv_skb+0x64/0x138 [ 3788.514229] genl_rcv+0x40/0x60 [ 3788.514233] netlink_unicast+0x32c/0x3b0 [ 3788.514237] netlink_sendmsg+0x170/0x3b8 [ 3788.514241] __sys_sendto+0x12c/0x1c0 [ 3788.514246] __arm64_sys_sendto+0x30/0x48 [ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8 [ 3788.514255] do_el0_svc+0x48/0xd0 [ 3788.514259] el0_svc+0x48/0x210 [ 3788.514264] el0t_64_sync_handler+0xa0/0xe8 [ 3788.514268] el0t_64_sync+0x198/0x1a0 [ 3788.514271] ---[ end trace 0000000000000000 ]--- Fix by using virtio_device->device consistently for allocation and deallocation | ||||
| CVE-2026-23047 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn't be paused anymore, but doesn't ever set t->paused even though it's able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn't work for linger requests -- since __submit_request() doesn't operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don't get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It's waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex. | ||||
| CVE-2026-23049 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again. | ||||
| CVE-2026-23051 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix drm panic null pointer when driver not support atomic When driver not support atomic, fb using plane->fb rather than plane->state->fb. (cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef) | ||||
| CVE-2026-23056 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uacce: implement mremap in uacce_vm_ops to return -EPERM The current uacce_vm_ops does not support the mremap operation of vm_operations_struct. Implement .mremap to return -EPERM to remind users. The reason we need to explicitly disable mremap is that when the driver does not implement .mremap, it uses the default mremap method. This could lead to a risk scenario: An application might first mmap address p1, then mremap to p2, followed by munmap(p1), and finally munmap(p2). Since the default mremap copies the original vma's vm_private_data (i.e., q) to the new vma, both munmap operations would trigger vma_close, causing q->qfr to be freed twice(qfr will be set to null here, so repeated release is ok). | ||||
| CVE-2026-23063 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers. | ||||
| CVE-2026-23068 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call. | ||||
| CVE-2026-23080 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. | ||||
| CVE-2026-23093 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbd: fix dma_unmap_sg() nents The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. | ||||
| CVE-2026-23094 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site. | ||||
| CVE-2026-2317 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-18 | 6.5 Medium |
| Inappropriate implementation in Animation in Google Chrome prior to 145.0.7632.45 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-2441 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-18 | 8.8 High |
| Use after free in CSS in Google Chrome prior to 145.0.7632.75 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-23127 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix refcount warning on event->mmap_count increment When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the following warning is triggered: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 PoC: struct perf_event_attr attr = {0}; int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd, PERF_FLAG_FD_OUTPUT); mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0); This occurs when creating a group member event with the flag PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing the event triggers the warning. Since the event has copied the output_event in perf_event_set_output(), event->rb is set. As a result, perf_mmap_rb() calls refcount_inc(&event->mmap_count) when event->mmap_count = 0. Disallow the case when event->mmap_count = 0. This also prevents two events from updating the same user_page. | ||||
| CVE-2026-23131 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names The hp-bioscfg driver attempts to register kobjects with empty names when the HP BIOS returns attributes with empty name strings. This causes multiple kernel warnings: kobject: (00000000135fb5e6): attempted to be registered with empty name! WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310 Add validation in hp_init_bios_buffer_attribute() to check if the attribute name is empty after parsing it from the WMI buffer. If empty, log a debug message and skip registration of that attribute, allowing the module to continue processing other valid attributes. | ||||
| CVE-2026-23134 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slab: fix kmalloc_nolock() context check for PREEMPT_RT On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ context, but misses the case where preemption is disabled. When a BPF program runs from a tracepoint with preemption disabled (preempt_count > 0), kmalloc_nolock() proceeds to call local_lock_irqsave() which attempts to acquire a sleeping lock, triggering: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128 preempt_count: 2, expected: 0 Fix this by checking !preemptible() on PREEMPT_RT, which directly expresses the constraint that we cannot take a sleeping lock when preemption is disabled. This encompasses the previous checks for NMI and hard IRQ contexts while also catching cases where preemption is disabled. | ||||
| CVE-2026-23156 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: fix error propagation in efivar_entry_get() efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get(). | ||||
| CVE-2026-23159 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: sched: Fix perf crash with new is_user_task() helper In order to do a user space stacktrace the current task needs to be a user task that has executed in user space. It use to be possible to test if a task is a user task or not by simply checking the task_struct mm field. If it was non NULL, it was a user task and if not it was a kernel task. But things have changed over time, and some kernel tasks now have their own mm field. An idea was made to instead test PF_KTHREAD and two functions were used to wrap this check in case it became more complex to test if a task was a user task or not[1]. But this was rejected and the C code simply checked the PF_KTHREAD directly. It was later found that not all kernel threads set PF_KTHREAD. The io-uring helpers instead set PF_USER_WORKER and this needed to be added as well. But checking the flags is still not enough. There's a very small window when a task exits that it frees its mm field and it is set back to NULL. If perf were to trigger at this moment, the flags test would say its a user space task but when perf would read the mm field it would crash with at NULL pointer dereference. Now there are flags that can be used to test if a task is exiting, but they are set in areas that perf may still want to profile the user space task (to see where it exited). The only real test is to check both the flags and the mm field. Instead of making this modification in every location, create a new is_user_task() helper function that does all the tests needed to know if it is safe to read the user space memory or not. [1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/ | ||||
| CVE-2026-23174 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: handle changing device dma map requirements The initial state of dma_needs_unmap may be false, but change to true while mapping the data iterator. Enabling swiotlb is one such case that can change the result. The nvme driver needs to save the mapped dma vectors to be unmapped later, so allocate as needed during iteration rather than assume it was always allocated at the beginning. This fixes a NULL dereference from accessing an uninitialized dma_vecs when the device dma unmapping requirements change mid-iteration. | ||||
| CVE-2026-23177 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, shmem: prevent infinite loop on truncate race When truncating a large swap entry, shmem_free_swap() returns 0 when the entry's index doesn't match the given index due to lookup alignment. The failure fallback path checks if the entry crosses the end border and aborts when it happens, so truncate won't erase an unexpected entry or range. But one scenario was ignored. When `index` points to the middle of a large swap entry, and the large swap entry doesn't go across the end border, find_get_entries() will return that large swap entry as the first item in the batch with `indices[0]` equal to `index`. The entry's base index will be smaller than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the "base < index" check. The code will then call shmem_confirm_swap(), get the order, check if it crosses the END boundary (which it doesn't), and retry with the same index. The next iteration will find the same entry again at the same index with same indices, leading to an infinite loop. Fix this by retrying with a round-down index, and abort if the index is smaller than the truncate range. | ||||
| CVE-2026-23179 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready() When the socket is closed while in TCP_LISTEN a callback is run to flush all outstanding packets, which in turns calls nvmet_tcp_listen_data_ready() with the sk_callback_lock held. So we need to check if we are in TCP_LISTEN before attempting to get the sk_callback_lock() to avoid a deadlock. | ||||