| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: protect late read accesses to the hierarchy
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
This is not proper, a conversion from a ref to a locked netdev
must include a liveness check (a check if the netdev hasn't been
unregistered already). Fix the read cases (those under RCU).
Writes needs a separate change to protect from creating the
hierarchy after flush has already run. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reset sparse-read state in osd_fault()
When a fault occurs, the connection is abandoned, reestablished, and any
pending operations are retried. The OSD client tracks the progress of a
sparse-read reply using a separate state machine, largely independent of
the messenger's state.
If a connection is lost mid-payload or the sparse-read state machine
returns an error, the sparse-read state is not reset. The OSD client
will then interpret the beginning of a new reply as the continuation of
the old one. If this makes the sparse-read machinery enter a failure
state, it may never recover, producing loops like:
libceph: [0] got 0 extents
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
libceph: data len 142248331 != extent len 0
libceph: osd0 (1)...:6801 socket error on read
Therefore, reset the sparse-read state in osd_fault(), ensuring retries
start from a clean state. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: Make the addrs_lock be per port
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
smc91x: fix broken irq-context in PREEMPT_RT
When smc91x.c is built with PREEMPT_RT, the following splat occurs
in FVP_RevC:
[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106]
[ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work
[ 13.062266] C
** replaying previous printk message **
[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}
[ 13.062353] Hardware name: , BIOS
[ 13.062382] Workqueue: mld mld_ifc_work
[ 13.062469] Call trace:
[ 13.062494] show_stack+0x24/0x40 (C)
[ 13.062602] __dump_stack+0x28/0x48
[ 13.062710] dump_stack_lvl+0x7c/0xb0
[ 13.062818] dump_stack+0x18/0x34
[ 13.062926] process_scheduled_works+0x294/0x450
[ 13.063043] worker_thread+0x260/0x3d8
[ 13.063124] kthread+0x1c4/0x228
[ 13.063235] ret_from_fork+0x10/0x20
This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,
but smc_special_unlock() does not restore IRQs on PREEMPT_RT.
The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),
and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke
rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.
To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). |
| In the Linux kernel, the following vulnerability has been resolved:
erspan: Initialize options_len before referencing options.
The struct ip_tunnel_info has a flexible array member named
options that is protected by a counted_by(options_len)
attribute.
The compiler will use this information to enforce runtime bounds
checking deployed by FORTIFY_SOURCE string helpers.
As laid out in the GCC documentation, the counter must be
initialized before the first reference to the flexible array
member.
After scanning through the files that use struct ip_tunnel_info
and also refer to options or options_len, it appears the normal
case is to use the ip_tunnel_info_opts_set() helper.
Said helper would initialize options_len properly before copying
data into options, however in the GRE ERSPAN code a partial
update is done, preventing the use of the helper function.
Before this change the handling of ERSPAN traffic in GRE tunnels
would cause a kernel panic when the kernel is compiled with
GCC 15+ and having FORTIFY_SOURCE configured:
memcpy: detected buffer overflow: 4 byte write of buffer size 0
Call Trace:
<IRQ>
__fortify_panic+0xd/0xf
erspan_rcv.cold+0x68/0x83
? ip_route_input_slow+0x816/0x9d0
gre_rcv+0x1b2/0x1c0
gre_rcv+0x8e/0x100
? raw_v4_input+0x2a0/0x2b0
ip_protocol_deliver_rcu+0x1ea/0x210
ip_local_deliver_finish+0x86/0x110
ip_local_deliver+0x65/0x110
? ip_rcv_finish_core+0xd6/0x360
ip_rcv+0x186/0x1a0
Reported-at: https://launchpad.net/bugs/2129580 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid deadlock on fallback while reinjecting
Jakub reported an MPTCP deadlock at fallback time:
WARNING: possible recursive locking detected
6.18.0-rc7-virtme #1 Not tainted
--------------------------------------------
mptcp_connect/20858 is trying to acquire lock:
ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280
but task is already holding lock:
ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&msk->fallback_lock);
lock(&msk->fallback_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by mptcp_connect/20858:
#0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0
#1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0
#2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0
stack backtrace:
CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full)
Hardware name: Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_deadlock_bug.cold+0xc0/0xcd
validate_chain+0x2ff/0x5f0
__lock_acquire+0x34c/0x740
lock_acquire.part.0+0xbc/0x260
_raw_spin_lock_bh+0x38/0x50
__mptcp_try_fallback+0xd8/0x280
mptcp_sendmsg_frag+0x16c2/0x3050
__mptcp_retrans+0x421/0xaa0
mptcp_release_cb+0x5aa/0xa70
release_sock+0xab/0x1d0
mptcp_sendmsg+0xd5b/0x1bc0
sock_write_iter+0x281/0x4d0
new_sync_write+0x3c5/0x6f0
vfs_write+0x65e/0xbb0
ksys_write+0x17e/0x200
do_syscall_64+0xbb/0xfd0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fa5627cbc5e
Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e
RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005
RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920
R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9c
The packet scheduler could attempt a reinjection after receiving an
MP_FAIL and before the infinite map has been transmitted, causing a
deadlock since MPTCP needs to do the reinjection atomically from WRT
fallback.
Address the issue explicitly avoiding the reinjection in the critical
scenario. Note that this is the only fallback critical section that
could potentially send packets and hit the double-lock. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: duplicate handshake cancellations leak socket
When a handshake request is cancelled it is removed from the
handshake_net->hn_requests list, but it is still present in the
handshake_rhashtbl until it is destroyed.
If a second cancellation request arrives for the same handshake request,
then remove_pending() will return false... and assuming
HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue
processing through the out_true label, where we put another reference on
the sock and a refcount underflow occurs.
This can happen for example if a handshake times out - particularly if
the SUNRPC client sends the AUTH_TLS probe to the server but doesn't
follow it up with the ClientHello due to a problem with tlshd. When the
timeout is hit on the server, the server will send a FIN, which triggers
a cancellation request via xs_reset_transport(). When the timeout is
hit on the client, another cancellation request happens via
xs_tls_handshake_sync().
Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel
path so duplicate cancels can be detected. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix XDP_TX path
For XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is not
correct. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may be
looping within NAPI and some event flags may be set in earlier
iterations. In particular, if BNXT_TX_EVENT is set earlier indicating
some XDP_TX packets are ready and pending, it will be cleared if it is
XDP_TX action again. Normally, we will set BNXT_TX_EVENT again when we
successfully call __bnxt_xmit_xdp(). But if the TX ring has no more
room, the flag will not be set. This will cause the TX producer to be
ahead but the driver will not hit the TX doorbell.
For multi-buf XDP_TX, there is no need to clear the event flags and set
BNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier in
bnxt_rx_pkt().
The visible symptom of this is that the RX ring associated with the
TX XDP ring will eventually become empty and all packets will be dropped.
Because this condition will cause the driver to not refill the RX ring
seeing that the TX ring has forever pending XDP_TX packets.
The fix is to only clear BNXT_RX_EVENT when we have successfully
called __bnxt_xmit_xdp(). |
| Openwave Webtop Media Transcoder does not enforce administrator-defined file type restrictions to restrict the file-types to be converted. This may allow an authenticated user to process and convert unintended document types if bypassing the Webmail experience. |
| IBM i 7.3, 7.4, 7.5, and 7.6 is vulnerable to a denial of service to Digital Certificate Manager (DCM) for System TLS using applications attempting to create secure network connections. A bad actor could use this to prevent a service from starting or cause it to fallback to non-secure connections. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix runtime PM leak in nouveau_connector_detect()
If nvif_outp_edid_get() fails, nouveau_connector_detect() returns
early without dropping the runtime PM reference taken at the start
of the function, keeping the device powered on until the next
successful detect.
Balance the reference on the error path like the other exit paths
do. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()
nouveau_bo_pin_locked() checks whether an already pinned BO is in a
memory domain compatible with a new pin request. When the domains are
incompatible, it sets -EBUSY but still calls ttm_bo_pin() before
returning.
Callers treat a failed nouveau_bo_pin() as not having acquired a new pin,
so the extra pin count is never decreased by a matching unpin.
This triggers the warning in ttm_bo_release():
WARN_ON_ONCE(bo->pin_count);
Found when fuzzing the nouveau driver with a modified Syzkaller:
WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212
Modules linked in:
CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy)
nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256
Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8
msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-...
RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36
RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8
msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55
R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290
R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline]
ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330
nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90
drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165
kref_put include/linux/kref.h:65 [inline]
__drm_gem_object_put include/drm/drm_gem.h:562 [inline]
drm_gem_object_put include/drm/drm_gem.h:575 [inline]
nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195
nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000
nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225
nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284
nouveau 0000:01:00.0: syz.2.23[2209]: validate_init
drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438
__fput+0x39c/0xa60 fs/file_table.c:512
nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2
task_work_run+0x15a/0x230 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x82b/0x25a0 kernel/exit.c:1009
do_group_exit+0xc2/0x280 kernel/exit.c:1152
get_signal+0x1d6e/0x1f30 kernel/signal.c:3046
arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:66 [inline]
exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RI
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in cd321x_update_work()
cd321x_update_work() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| libIEC61850 is an open-source implementation of IEC 61850 client and server protocols including MMS, GOOSE, Sampled Values, and R-Session. Prior to 1.6.2, Reporting_RCBWriteAccessHandler accepts an RptID longer than 129 bytes in the report-control-block write path. When GI later causes sendNextReportEntrySegment to serialize the report, the function wraps rptIdBuf[130] as a temporary MmsValue and passes it to MmsValue_setVisibleString. The setter's resize path frees the stack-backed buffer, allowing a remote client to trigger an invalid free and server crash by writing the oversized RptID and then generating a report. This issue is fixed in version 1.6.2. |
| Invalid pointer, undefined behavior in the DOM: Notifications component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. |
| An Improper Control of a Resource Through its Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent eBGP peer to cause a routing-daemon crash via a BGP route update when RIB sharding is enabled. |
