| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vikunja 2.6.0 contains a broken access control flaw in getProjectAccessForUser (pkg/models/project_access.go), which resolves a user's effective project permission as the maximum over the project tree, silently overriding explicit lower-permission shares on sub-projects. A collaborator with write access on a parent project but read-only access to a child project can modify the child project's tasks and content. |
| phpMyFAQ before 4.1.9 contains a missing authorization vulnerability in the deleteUser() API that allows authenticated non-superadmin users with delete_user permission to delete superadmin accounts. Attackers can send a DELETE request to /admin/api/user/delete with a superadmin's userId other than 1, removing administrative access and accountability. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skmsg: preserve sg.copy across SG transforms
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting. |
| An Improper Privilege Management vulnerability [CWE-269] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.11, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions, FortiPAM 1.6.0, FortiPAM 1.5 all versions, FortiPAM 1.4 all versions, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.6.0 through 7.6.3, FortiProxy 7.4.0 through 7.4.13, FortiProxy 7.2 all versions, FortiProxy 7.0 all versions may allow an authenticated administrator to bypass the trusted host policy via crafted CLI command. |
| The Academy LMS – AI Course Builder, Quizzes, Certificates & eLearning plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.0.3. This is due to the `add_child()` function calling `add_role('academy_student')` on any existing account resolved from the attacker-supplied `email` parameter before `Store::link()` validates the guardian-ward relationship, and failing to roll back that role write when `Store::link()` returns a `WP_Error`. This makes it possible for authenticated attackers with the `academy_guardian` role or higher to elevate any existing WordPress account — including their own — to the `academy_student` role, gaining `edit_posts` (Contributor-equivalent) capabilities and, when the student file-upload setting is enabled, `upload_files` (Author-equivalent) capabilities not granted to the guardian role. When a guardian supplies their own email address, `email_exists()` resolves to their own user ID, causing `Store::link()` to reject the self-link, but because the `add_role()` call has already executed and is never reversed, the academy_student role grant on their own account persists permanently. |
| KEDA is a Kubernetes-based Event Driven Autoscaling component. In version 2.20.2 and earlier, a namespace administrator who can create TriggerAuthentication and ScaledObject resources can set hashiCorpVault.address to a tenant-controlled endpoint and select Kubernetes authentication without an explicit credential. KEDA then uses the operator pod's projected ServiceAccount token and sends it to that endpoint as a Vault login credential. The JWT-shape filter from the prior CVE-2025-68476 remediation accepts the operator token because its subject is a Kubernetes ServiceAccount, so the attacker can obtain the operator's cluster-wide permissions, including broad Secret reads and workload or admission-related operations. This vulnerability is fixed in 2.21.0. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 5.7.3. This is due to the `OsSettingsController::update()` handler iterating over attacker-supplied `settings` parameters without an allowlist of permitted setting names or values, and `OsSettingsHelper::prepare_value()` performing no role allowlist validation before persisting the `default_wp_role_for_customer` setting — a restriction that exists only in the UI dropdown and is never enforced server-side. This makes it possible for authenticated attackers holding a LatePoint role with the `settings__edit` capability (such as an agent or custom role) to overwrite the default WordPress role for new customers with `administrator`, causing any subsequently self-registered LatePoint customer account to be created with full WordPress administrator privileges. Exploitation requires that a WordPress administrator has granted the `settings__edit` capability to a LatePoint agent or custom role, and that a new customer account is registered through LatePoint after the malicious setting change is persisted. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink
ip6gre_changelink() and ip6erspan_changelink() operate on at most two
netns, dev_net(dev) and the tunnel link netns t->net. They differ once
the device is created in or moved to a netns other than the one the
request runs in. The rtnl changelink path checks CAP_NET_ADMIN only
against dev_net(dev), so a caller privileged there but not in t->net can
rewrite a tunnel that lives in t->net.
Gate both ops on rtnl_dev_link_net_capable() at their top, before any
attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
memfd: deny writeable mappings when implying SEAL_WRITE
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in
net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked it. The other patches in this series use the same helper.
Gate ipgre_changelink() and erspan_changelink() with it, at the top of
the op before any attribute is parsed, because the parsers update live
tunnel fields first. ipgre_netlink_parms() sets t->collect_md before
ip_tunnel_changelink() runs.
Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in
vti6_siocdevprivate().") added the same check on the ioctl path. This
adds it on RTM_NEWLINK. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: require CAP_NET_ADMIN in target netns for unattached ioctls
/dev/ppp open is currently authorized against file->f_cred->user_ns,
while unattached administrative ioctls operate on current->nsproxy->net_ns.
As a result, a local unprivileged user can create a new user namespace
with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,
and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against
an inherited network namespace.
Require CAP_NET_ADMIN in the user namespace that owns the target network
namespace before handling unattached PPP administrative ioctls.
This preserves normal pppd operation in the network namespace it is
actually privileged in, while rejecting the userns-only inherited-netns
case. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The shovel management resource's is_authorized/2 delegates to rabbit_mgmt_util:is_authorized_monitor/2, which accepts the monitoring tag. But allowed_methods includes DELETE, and delete_resource/2 deletes / restarts shovel runtime parameters with no additional role check. A monitoring user , intended to have read-only visibility , can therefore delete or restart any shovel in any vhost they can see. A read-only monitoring user can delete or restart any dynamic shovel , a state-changing operation that the equivalent /api/parameters endpoint correctly restricts to policymaker. Preconditions include rabbitmq_shovel + rabbitmq_shovel_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| Incorrect Privilege Assignment vulnerability in Brainstorm Force OttoKit suretriggers allows Privilege Escalation.This issue affects OttoKit: from n/a through 1.1.40. |
| A vulnerability was detected in donetick up to 0.1.82. The impacted element is the function CanDeleteHistory of the file internal/chore/model/model.go of the component History Deletion Handler. The manipulation of the argument AssignedTo results in improper authorization. The attack can be launched remotely. The exploit is now public and may be used. The project maintainer explains: "The concerns about "IDOR" framing seem to be overstated in my opinion (...), as Circle members are already trusted collaborators. We will address this issue. However, since the impact is limited to trusted members within the same circle, I would classify this as a bug rather than a security vulnerability." |
| A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This impacts an unknown function of the file App/Home/Controller/UserController.class.php of the component Captcha Validation. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| Privilege escalation in the DLL Services component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, and Firefox ESR 140.17. |
