Export limit exceeded: 413273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (276 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45615 | 1 Mouse07410 | 1 Asn1c | 2026-05-29 | 8.2 High |
| mouse07410/asn1c is an ASN.1 compiler. In 1.4 and earlier, a memory safety vulnerability was identified in the OER decoding skeleton files generated by asn1c (specifically INTEGER_oer.c). When parsing a maliciously crafted, zero-length OER payload for a variable-length, non-negative INTEGER type, the decoder fails to validate the required bytes before extracting the Most Significant Bit (MSB). This forces a precise 1-byte Heap Out-of-Bounds (OOB) Read. Because asn1c generated code is primarily deployed to parse untrusted network inputs (such as V2X network protocols, 5G telecom headers, or X.509 certificates), when the decoder processes untrusted network-originated input, a remote attacker can exploit this to cause a Denial of Service (DoS) or trigger incorrect integer interpretation in downstream applications (e.g., protocol state poisoning or logic bypass). | ||||
| CVE-2026-48685 | 1 Pavel-odintsov | 1 Fastnetmon | 2026-05-27 | 6.5 Medium |
| FastNetMon Community Edition through 1.2.9 has out-of-bounds memory access because it incorrectly parses BGP path attributes with the extended length flag set. In src/bgp_protocol.hpp, the parse_raw_bgp_attribute() function correctly identifies when extended_length_bit is set and sets length_of_length_field to 2, but then reads only a single byte for the attribute value length (attribute_value_length = value[2] at line 173). Per RFC 4271 Section 4.3, when the Extended Length bit is set, the Attribute Length field is two octets and the value should be read as a 16-bit big-endian integer from value[2] and value[3]. As a result, any attribute longer than 255 bytes has its length silently truncated to the low byte (e.g., 300 bytes = 0x012C is read as 0x2C = 44 bytes). The remaining 256 bytes are then misinterpreted as subsequent attributes, causing cascading parse failures and potential out-of-bounds memory access. | ||||
| CVE-2026-9054 | 1 9front | 1 9front | 2026-05-22 | N/A |
| An attacker sending tcp, il, rudp, rudp, or gre packets with a length less than the header size would trigger a kernel panic. | ||||
| CVE-2026-43436 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface. | ||||
| CVE-2026-8562 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-18 | 4.3 Medium |
| Side-channel information leakage in Navigation in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-31635 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix oversized RESPONSE authenticator length check rxgk_verify_response() decodes auth_len from the packet and is supposed to verify that it fits in the remaining bytes. The existing check is inverted, so oversized RESPONSE authenticators are accepted and passed to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an impossible length and hit BUG_ON(len). Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: RIP: __skb_to_sgvec() [net/core/skbuff.c:5285 (discriminator 1)] Call Trace: skb_to_sgvec() [net/core/skbuff.c:5305] rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81] rxgk_verify_response() [net/rxrpc/rxgk.c:1268] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Reject authenticator lengths that exceed the remaining packet payload. | ||||
| CVE-2026-6923 | 1 Nuvoton | 1 Npct7xx | 2026-05-15 | 3.8 Low |
| A side-channel attack, which requires a physical presence to the TPM, can lead to extraction of an Elliptic Curve Diffie-Hellman (ECDH) key. | ||||
| CVE-2026-43291 | 1 Linux | 1 Linux Kernel | 2026-05-14 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Fix parameter validation for packet data Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct). | ||||
| CVE-2026-43266 | 1 Linux | 2 Kernel, Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ] | ||||
| CVE-2026-42216 | 2 Academysoftwarefoundation, Openexr | 2 Openexr, Openexr | 2026-05-08 | 9.1 Critical |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. | ||||
| CVE-2026-43017 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request. | ||||
| CVE-2026-8017 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 3.1 Low |
| Side-channel information leakage in Media in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-5766 | 1 Djangoproject | 1 Django | 2026-05-07 | 5.3 Medium |
| An issue was discovered in 6.0 before 6.0.5 and 5.2 before 5.2.14. ASGI requests with a missing or understated `Content-Length` header can bypass the `FILE_UPLOAD_MAX_MEMORY_SIZE` limit, potentially loading large files into memory and causing service degradation. As a reminder, Django expects a limit to be configured at the web server level rather than solely relying on `FILE_UPLOAD_MAX_MEMORY_SIZE`. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Kyle Agronick for reporting this issue. | ||||
| CVE-2026-35547 | 1 Freebsd | 1 Freebsd | 2026-05-01 | 8.1 High |
| When processing the header of an incoming message, libnv failed to properly validate the message size. The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges. | ||||
| CVE-2026-3868 | 1 Moxa | 2 Edr-8010 Series, Edr-g9010 Series | 2026-04-28 | N/A |
| An improper handling of the length parameter inconsistency vulnerability has been identified in Moxa’s Secure Router. Because of improper validation of length parameters in the HTTPS management interface, an unauthenticated remote attacker could send specially crafted requests that trigger a buffer overflow condition, causing the web service to become unresponsive. Successful exploitation may result in a denial-of-service condition requiring a device reboot to restore normal operation. While successful exploitation can severely impact the availability of the affected device, no impact to the confidentiality or integrity of the affected product has been identified. Additionally, no confidentiality, integrity, or availability impact to the subsequent system has been identified. | ||||
| CVE-2026-41898 | 1 Rust-openssl Project | 1 Rust-openssl | 2026-04-28 | 5.3 Medium |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.24 to before 0.10.78, the FFI trampolines behind SslContextBuilder::set_psk_client_callback, set_psk_server_callback, set_cookie_generate_cb, and set_stateless_cookie_generate_cb forwarded the user closure's returned usize directly to OpenSSL without checking it against the &mut [u8] that was handed to the closure. This can lead to buffer overflows and other unintended consequences. This vulnerability is fixed in 0.10.78. | ||||
| CVE-2009-2407 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-04-23 | N/A |
| Heap-based buffer overflow in the parse_tag_3_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to a large encrypted key size in a Tag 3 packet. | ||||
| CVE-2009-2406 | 2 Linux, Redhat | 4 Kernel, Linux Kernel, Enterprise Linux and 1 more | 2026-04-23 | N/A |
| Stack-based buffer overflow in the parse_tag_11_packet function in fs/ecryptfs/keystore.c in the eCryptfs subsystem in the Linux kernel before 2.6.30.4 allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving a crafted eCryptfs file, related to not ensuring that the key signature length in a Tag 11 packet is compatible with the key signature buffer size. | ||||
| CVE-2009-0847 | 1 Mit | 1 Kerberos | 2026-04-23 | N/A |
| The asn1buf_imbed function in the ASN.1 decoder in MIT Kerberos 5 (aka krb5) 1.6.3, when PK-INIT is used, allows remote attackers to cause a denial of service (application crash) via a crafted length value that triggers an erroneous malloc call, related to incorrect calculations with pointer arithmetic. | ||||
| CVE-2009-0692 | 2 Isc, Redhat | 3 Dhcp, Enterprise Linux, Rhel Eus | 2026-04-23 | N/A |
| Stack-based buffer overflow in the script_write_params method in client/dhclient.c in ISC DHCP dhclient 4.1 before 4.1.0p1, 4.0 before 4.0.1p1, 3.1 before 3.1.2p1, 3.0, and 2.0 allows remote DHCP servers to execute arbitrary code via a crafted subnet-mask option. | ||||