| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) discloses sensitive information to unauthorized users. The information can be used to mount further attacks on the system. IBM X-Force ID: 123860. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| A vulnerability in the Operations, Administration, Maintenance, and Provisioning (OAMP) credential reset functionality for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the OAMP and sending a crafted HTTP request. A successful exploit could allow the attacker to gain administrator privileges. The attacker must successfully authenticate to the system to exploit this vulnerability. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) running software release 10.5, 11.0, or 11.5. Cisco Bug IDs: CSCve92752. |
| A vulnerability in the email message filtering feature of Cisco AsyncOS Software for the Cisco Email Security Appliance could allow an unauthenticated, remote attacker to cause an affected device to run out of memory and stop scanning and forwarding email messages. When system memory is depleted, it can cause the filtering process to crash, resulting in a denial of service (DoS) condition on the device. This vulnerability affects software version 9.0 through the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. Cisco Bug IDs: CSCvd29354. |
| A vulnerability in the web-based user interface of Cisco SocialMiner could allow an unauthenticated, remote attacker to have read and write access to information stored in the affected system. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries, which could allow the attacker to read and write files and execute remote code within the application. Cisco Bug IDs: CSCvf47946. |
| A vulnerability in the General Packet Radio Service (GPRS) Tunneling Protocol ingress packet handler of Cisco ASR 5500 System Architecture Evolution (SAE) Gateways could allow an unauthenticated, remote attacker to cause a partial denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation of GPRS Tunneling Protocol packet headers. An attacker could exploit this vulnerability by sending a malformed GPRS Tunneling Protocol packet to an affected device. A successful exploit could allow the attacker to cause the GTPUMGR process on an affected device to restart unexpectedly, resulting in a partial DoS condition. If the GTPUMGR process restarts, there could be a brief impact on traffic passing through the device. Cisco Bug IDs: CSCve07119. |
| A vulnerability in the malware detection functionality within Advanced Malware Protection (AMP) of Cisco AsyncOS Software for Cisco Email Security Appliances (ESAs) could allow an unauthenticated, remote attacker to cause an email attachment containing malware to be delivered to the end user. The vulnerability is due to the failure of AMP to scan certain EML attachments that could contain malware. An attacker could exploit this vulnerability by sending an email with a crafted EML attachment through the targeted device. A successful exploit could allow the attacker to bypass the configured ESA email message and content filtering and allow the malware to be delivered to the end user. Vulnerable Products: This vulnerability affects Cisco AsyncOS Software for Cisco ESA, both virtual and hardware appliances, that are configured with message or content filters to scan incoming email attachments on the ESA. Cisco Bug IDs: CSCuz81533. |
| A vulnerability in the ROM Monitor (ROMMON) code of Cisco IR800 Integrated Services Router Software could allow an unauthenticated, local attacker to boot an unsigned Hypervisor on an affected device and compromise the integrity of the system. The vulnerability is due to insufficient sanitization of user input. An attacker who can access an affected router via the console could exploit this vulnerability by entering ROMMON mode and modifying ROMMON variables. A successful exploit could allow the attacker to execute arbitrary code and install a malicious version of Hypervisor firmware on an affected device. Cisco Bug IDs: CSCvb44027. |
| A vulnerability in the ability for guest users to join meetings via a hyperlink with Cisco Meeting Server could allow an authenticated, remote attacker to enter a meeting with a hyperlink URL, even though access should be denied. The vulnerability is due to the incorrect implementation of the configuration setting Guest access via hyperlinks, which should allow the administrative user to prevent guest users from using hyperlinks to connect to meetings. An attacker could exploit this vulnerability by using a crafted hyperlink to connect to a meeting. An exploit could allow the attacker to connect directly to the meeting with a hyperlink, even though access should be denied. The attacker would still require a valid hyperlink and encoded secret identifier to be connected. Cisco Bug IDs: CSCve20873. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| A vulnerability in the Cisco Network Plug and Play application of Cisco IOS 12.4 through 15.6 and Cisco IOS XE 3.3 through 16.4 could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data by using an invalid certificate. The vulnerability is due to insufficient certificate validation by the affected software. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt confidential information on user connections to the affected software. Cisco Bug IDs: CSCvc33171. |
| An issue was discovered on MOXA EDS-G512E 5.1 build 16072215 devices. A denial of service may occur. |
| In FlightGear before version 2017.3.1, Main/logger.cxx in the FGLogger subsystem allows one to overwrite any file via a resource that affects the contents of the global Property Tree. |
| In the PatternMatch function in fontfile/fontdir.c in libXfont through 1.5.2 and 2.x before 2.0.2, an attacker with access to an X connection can cause a buffer over-read during pattern matching of fonts, leading to information disclosure or a crash (denial of service). This occurs because '\0' characters are incorrectly skipped in situations involving ? characters. |
| In the pcfGetProperties function in bitmap/pcfread.c in libXfont through 1.5.2 and 2.x before 2.0.2, a missing boundary check (for PCF files) could be used by local attackers authenticated to an Xserver for a buffer over-read, for information disclosure or a crash of the X server. |
| There is a floating point exception in the kodak_radc_load_raw function in dcraw_common.cpp in LibRaw 0.18.2. It will lead to a remote denial of service attack. |
| Sensitive data can be exposed in the IBM TRIRIGA Application Platform 3.3, 3.4, and 3.5 that can lead to an attacker gaining unauthorized access to the system. IBM X-Force ID: 126867. |
| The Fastly CDN module before 1.2.26 for Magento2, when used with a third-party authentication plugin, might allow remote authenticated users to obtain sensitive information from authenticated sessions via vectors involving caching of redirect responses. |
| In Wireshark 2.4.0, 2.2.0 to 2.2.8, and 2.0.0 to 2.0.14, the MSDP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-msdp.c by adding length validation. |
| The WriteTHUMBNAILImage function in coders/thumbnail.c in ImageMagick through 7.0.6-10 allows an attacker to cause a denial of service (buffer over-read) by sending a crafted JPEG file. |
