| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Ensure swevent hrtimer is properly destroyed
With the change to hrtimer_try_to_cancel() in
perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to
still be active by the time the event gets freed.
Make sure the event does a full hrtimer_cancel() on the free path by
installing a perf_event::destroy handler. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: fix double free of devm_kzalloc() memory
A previous change added NULL checks and cleanup for allocation
failures in sma1307_setting_loaded().
However, the cleanup for mode_set entries is wrong. Those entries are
allocated with devm_kzalloc(), so they are device-managed resources and
must not be freed with kfree(). Manually freeing them in the error path
can lead to a double free when devres later releases the same memory.
Drop the manual kfree() loop and let devres handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: return after auxiliary_device_uninit() in error path
When auxiliary_device_add() fails, the error block calls
auxiliary_device_uninit() but does not return. The uninit drops the
last reference and synchronously runs bnge_aux_dev_release(), which sets
bd->auxr_dev = NULL and frees the underlying object. The subsequent
bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a
good thing to have happen when trying to clean up from an error.
Add the missing return, as the auxiliary bus documentation states is a
requirement (seems that LLM tools read documentation better than humans
do...) |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix use-after-free in migration restore
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Drain deferred trigger frees if kthread creation fails
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either. |
| Out of bounds read in GPU in Google Chrome on Android prior to 147.0.7727.117 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Race in GPU in Google Chrome on Windows prior to 147.0.7727.117 allowed a remote attacker to potentially perform a sandbox escape via a crafted video file. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix memory leaks and NULL deref in smb2_lock()
smb2_lock() has three error handling issues after list_del() detaches
smb_lock from lock_list at no_check_cl:
1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK
path, goto out leaks smb_lock and its flock because the out:
handler only iterates lock_list and rollback_list, neither of
which contains the detached smb_lock.
2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out
leaks smb_lock and flock for the same reason. The error code
returned to the dispatcher is also stale.
3) In the rollback path, smb_flock_init() can return NULL on
allocation failure. The result is dereferenced unconditionally,
causing a kernel NULL pointer dereference. Add a NULL check to
prevent the crash and clean up the bookkeeping; the VFS lock
itself cannot be rolled back without the allocation and will be
released at file or connection teardown.
Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before
the if(!rc) check in the UNLOCK branch so all exit paths share one
free site, and by freeing smb_lock and flock before goto out in the
non-UNLOCK branch. Propagate the correct error code in both cases.
Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding
a NULL check for locks_free_lock(rlock) in the shared cleanup.
Found via call-graph analysis using sqry. |
| Use after free in DevTools in Google Chrome prior to 147.0.7727.117 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
[ rjw: Subject tweak ] |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access()
In function kvm_eiointc_regs_access(), the register base address is
caculated from array base address plus offset, the offset is absolute
value from the base address. The data type of array base address is
u64, it should be converted into the "void *" type and then plus the
offset. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so
that whenever something else modifies CR4, that bit remains set. Which
in itself is a perfectly fine idea.
However, there's an issue when during boot FRED is initialized: first on
the BSP and later on the APs. Thus, there's a window in time when
exceptions cannot be handled.
This becomes particularly nasty when running as SEV-{ES,SNP} or TDX
guests which, when they manage to trigger exceptions during that short
window described above, triple fault due to FRED MSRs not being set up
yet.
See Link tag below for a much more detailed explanation of the
situation.
So, as a result, the commit in that Link URL tried to address this
shortcoming by temporarily disabling CR4 pinning when an AP is not
online yet.
However, that is a problem in itself because in this case, an attack on
the kernel needs to only modify the online bit - a single bit in RW
memory - and then disable CR4 pinning and then disable SM*P, leading to
more and worse things to happen to the system.
So, instead, remove the FRED bit from the CR4 pinning mask, thus
obviating the need to temporarily disable CR4 pinning.
If someone manages to disable FRED when poking at CR4, then
idt_invalidate() would make sure the system would crash'n'burn on the
first exception triggered, which is a much better outcome security-wise. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix RESPONSE authenticator parser OOB read
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix use-after-free in encoder release path
The fops_vcodec_release() function frees the context structure (ctx)
without first cancelling any pending or running work in ctx->encode_work.
This creates a race window where the workqueue handler (mtk_venc_worker)
may still be accessing the context memory after it has been freed.
Race condition:
CPU 0 (release path) CPU 1 (workqueue)
--------------------- ------------------
fops_vcodec_release()
v4l2_m2m_ctx_release()
v4l2_m2m_cancel_job()
// waits for m2m job "done"
mtk_venc_worker()
v4l2_m2m_job_finish()
// m2m job "done"
// BUT worker still running!
// post-job_finish access:
other ctx dereferences
// UAF if ctx already freed
// returns (job "done")
kfree(ctx) // ctx freed
Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job
lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle.
After v4l2_m2m_job_finish() is called, the m2m framework considers
the job complete and v4l2_m2m_ctx_release() returns, but the worker
function continues executing and may still access ctx.
The work is queued during encode operations via:
queue_work(ctx->dev->encode_workqueue, &ctx->encode_work)
The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx
fields even after calling v4l2_m2m_job_finish().
This vulnerability was confirmed with KASAN by running an instrumented
test module that widens the post-job_finish race window. KASAN detected:
BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180
Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12
Workqueue: mtk_vcodec_enc_wq mtk_venc_worker
Allocated by task 47:
__kasan_kmalloc+0x7f/0x90
fops_vcodec_open+0x85/0x1a0
Freed by task 47:
__kasan_slab_free+0x43/0x70
kfree+0xee/0x3a0
fops_vcodec_release+0xb7/0x190
Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx).
This ensures the workqueue handler is both cancelled (if pending) and
synchronized (waits for any running handler to complete) before the
context is freed.
Placement rationale: The fix is placed after v4l2_ctrl_handler_free()
and before list_del_init(&ctx->list). At this point, all m2m operations
are done (v4l2_m2m_ctx_release() has returned), and we need to ensure
the workqueue is synchronized before removing ctx from the list and
freeing it.
Note: The open error path does NOT need cancel_work_sync() because
INIT_WORK() only initializes the work structure - it does not schedule
it. Work is only scheduled later during device_run() operations. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
