| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPMU DEV Forminator forminator allows Stored XSS.This issue affects Forminator: from n/a through 1.57.3. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, readJSON in internal/bodyprocessors/json.go can stop its bounded flattening walk after reaching SecArgumentsLimit or the byte budget and then call gjson.Valid on the complete raw body. An unauthenticated attacker can submit shallow values followed by an extremely deeply nested JSON tail that was not visited by the bounded walk, causing gjson.Valid to recurse without a depth bound and terminate the hosting process with an unrecoverable fatal stack overflow. The ProcessRequest and ProcessResponse JSON paths share the affected readJSON validation flow, and the payload can remain within recommended body-size and argument-count limits. This issue is fixed in version 3.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not free nlk->groups while lockless readers can use it
netlink_realloc_groups() uses krealloc() under netlink_table_grab().
Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old
bitmap is freed immediately.
Two readers of nlk->groups / nlk->ngroups do not hold the netlink
table lock:
1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the
rhashtable walk in __netlink_diag_dump(), which only holds RCU.
Only the mc_list part of the dump takes nl_table_lock.
2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been
lockless since commit 21e4902aea80 ("netlink: Lockless lookup with
RCU grace period in socket release").
Both can read a freed buffer, and sk_diag_dump_groups() can also read
past the end of the old (smaller) buffer if it happens to load the old
@groups pointer together with the new @ngroups value, copying the
result into a NETLINK_DIAG_GROUPS attribute.
This is the same class of bug that commit f773608026ee ("netlink:
access nlk groups safely in netlink bind and getname") fixed for bind()
and getname(); these two readers were missed. Simply grabbing the table
lock in sk_diag_dump_groups() is not an option, because it is also
called with nl_table_lock already held from the mc_list section of the
dump.
Make the lockless readers safe instead:
- Allocate a new bitmap and free the old one after an RCU grace period,
instead of relying on the implicit kfree() done by krealloc().
- Publish @groups before @ngroups, both with release semantics, and have
the lockless readers load @ngroups first. A reader can then never pair
the new (bigger) size with the old (smaller) buffer, and a reader
picking up the new pointer while still seeing the old size is
guaranteed to see the initialized bitmap.
netlink_realloc_groups() is called from process context (bind() and
setsockopt()), so kfree_rcu_mightsleep() can be used, once the table
has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/IPoIB: Avoid restoring OPER_UP after multicast flush
ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to
prevent multicast joins while ipoib_mcast_dev_flush() is running, and
restores the flag afterwards if it was previously set.
This restore races with ipoib_ib_dev_down(). If the interface is brought
down while the flush is in progress, ipoib_ib_dev_down() clears
IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device
has already gone down.
Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race
aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP
being cleared to terminate its rtnl_trylock() retry loop. If the flag is
left set after shutdown, the workqueue retries forever, causing teardown
to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while
holding RTNL.
Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins
during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag.
Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast
joins are allowed, avoiding the race with device shutdown. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/i2c: Disable IRQ on unbind
Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind
path, leaving a potential UAF in case I2C IRQ is hit during this small
window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this.
(cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129
kfree+0x436/0x670 mm/slub.c:6818
ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210
ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706
rt2x00lib_remove_dev+0x55b/0x670
Undo the LED state in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent freeing a timer which is queued on the expiry list
Kijo analyzed another race in the POSIX CPU timer code:
Commit bf635681c906 converted cpu_timer::firing from a tristate value to a
boolean. This lost the distinction between "not owned by the firing list"
and "still owned, but delivery was canceled". The resulting race is:
expiry handler timer_settime() timer_delete()
-------------- --------------- --------------
collect timer onto
private firing list
firing = true
observes firing = true
firing = false
return TIMER_RETRY
wait for handler
observes firing = false
finish deletion
unhash and free timer
resume list traversal
read freed elist.next
-> UAF
The firing bit is clearly the wrong indicator since that commit.
Check whether the timer is queued on the expiry list or not instead. If it
is queued clear the firing bit to prevent signal delivery as before and
return TIMER_RETRY so the caller unlocks the timer which allows the expiry
code to make progress and remove it from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just free it on
completion if it was already cancelled. Also remove the warnings since
they can trigger in the intended architecture. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown
In drop_monitor teardown paths (net_dm_trace_off_set(),
net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set()
and net_dm_hw_monitor_start()), per-CPU timers are stopped using
timer_delete_sync() followed by cancel_work_sync().
However, there is a circular dependency between send_timer and
dm_alert_work:
1) sched_send_work() (timer callback) schedules dm_alert_work.
2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data()
or net_dm_hw_reset_per_cpu_data().
3) If memory allocation fails under memory pressure in the reset
function, it re-arms the timer via mod_timer(&data->send_timer, ...).
If dm_alert_work is running concurrently while timer_delete_sync()
executes on another CPU, an allocation failure in the worker will
re-arm the timer after timer_delete_sync() has already returned.
Once cancel_work_sync() completes and module_put() is called, the timer
remains active in the timer wheel. If the module is then unloaded, the
timer will fire and execute sched_send_work() in freed memory,
triggering a kernel panic / use-after-free.
Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees
that any in-flight timer handler has finished and prevents subsequent
re-arming attempts from running workers from succeeding. When monitoring
is restarted later, timer_setup() is invoked, which cleanly
re-initializes the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: pass PMKID to firmware if present
Zero out auth_status on initialization. Otherwise, garbage will
leak from the stack to the firmware (when ssid is less than 32 bytes
and/or when params->pmkid is set). Then, pass the params->pmkid to the
firmware (without it, the firmware caches a garbage PMKID on successful
authentication and denies a subsequent association request that includes
the PMKID). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local->interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: exclude old ACKs from tcp fast path
Exclude old ACKs before SND.UNA from the tcp fast path
as well as ACKs after SND.NXT.
Such ACKs will fall through to the slow path, where tcp_ack()
performs the appropriate validation and challenge ACK handling
according to RFC5961 and Commit 3d501dd326fb1c7 ("tcp: do not
accept ACK of bytes we never sent").
This prevents old ACKs from being accepted
or modifying connection state as part of the fast path before
appropriate ACK validation is applied.
In particular, this prevents payload carried by a segment with
an excessively old ACK from advancing RCV.NXT before the ACK
is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix potential UAF after asynchronous card release
Usually a sound driver releases the resources assigned to the card via
snd_card_free(), and it synchronizes with the whole release procedure.
However, when the card is released asynchronously via
snd_card_free_when_closed() like USB-audio driver, the situation is
slightly different; although the snd_card_disconnect() call at the
disconnection guarantees that any newer accesses will be gated, the
in-flight tasks might be still accessing to the underlying card->dev
device even after the disconnection, which would cause a
use-after-free in the end, as reported by fuzzers.
For addressing the bug above, this patch takes the refcount of
card->dev at initialization of the card object, and releases at its
destructor. This assures the availability of the card->dev in its
whole lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject IDR error pointers when deleting actions
tcf_action_delete() drops the reference held by its lookup before calling
tcf_idr_delete_index() with the saved action index. An unlocked
classifier can remove that action and reserve the same IDR slot with
ERR_PTR(-EBUSY) in between.
tcf_idr_delete_index() only checks the lookup result for NULL. It
therefore treats the reservation as a tc_action and dereferences
tcfa_bindcnt. A hardware execution breakpoint was used to schedule the
interleaving without changing the kernel source. KASAN reported this
decoded trace:
BUG: KASAN: null-ptr-deref in tca_action_gd+0x5b9/0x1010
Read of size 4 at addr 0000000000000010 by task poc/150
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002
RIP: tca_action_gd+0x5c0/0x1010:
arch_atomic_read at arch/x86/include/asm/atomic.h:23
raw_atomic_read at include/linux/atomic/atomic-arch-fallback.h:457
atomic_read at include/linux/atomic/atomic-instrumented.h:33
tcf_idr_delete_index at net/sched/act_api.c:766
tcf_action_delete at net/sched/act_api.c:1859
tcf_del_notify at net/sched/act_api.c:2014
tca_action_gd at net/sched/act_api.c:2064
R13: 0000000000000010 R15: fffffffffffffff0
Kernel panic - not syncing: Fatal exception
R15 contains ERR_PTR(-EBUSY), and adding the tcfa_bindcnt offset produces
the address in R13. With the guard applied, the same reproducer returned
-ENOENT without a KASAN report or panic. Treat error pointers as absent
and return -ENOENT. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lock the socket in sock_gettstamp()
sk->sk_flags must only be changed while holding the socket lock,
because sock_set_flag() and sock_reset_flag() use non atomic
operations (__set_bit() and __clear_bit()).
sock_gettstamp() is one of the last places where a bit of sk->sk_flags
is changed from a syscall without owning the socket lock, through
sock_enable_timestamp(sk, SOCK_TIMESTAMP).
sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags
without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp,
sunrpc, wireguard) need a careful audit, this will be addressed in a
separate patch.
Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free
caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind()
can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set,
because both threads perform a read-modify-write on the same word.
CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW)
-------------------------------- ----------------------------
read sk_flags = F read sk_flags = F
compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP)
store F | BIT(SOCK_RCU_FREE)
sk_add_node_rcu(sk, ...)
store F | BIT(SOCK_TIMESTAMP)
After the lost update, SOCK_RCU_FREE is clear while the socket is
visible to lockless UDP receive lookups. sk_destruct() then frees
the socket immediately instead of waiting for a RCU grace period,
while the receive path still holds a reference-less pointer to it:
BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410
Read of size 8 at addr ffff888008806610 by task exploit/207
CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1
ipv4_pktinfo_prepare+0x30/0x410
udp_queue_rcv_one_skb+0x51c/0x1180
udp_unicast_rcv_skb+0x109/0x350
ip_protocol_deliver_rcu+0x14b/0x310
ip_local_deliver_finish+0x29d/0x390
ip_local_deliver+0x24d/0x2a0
Only grab the socket lock when SOCK_TIMESTAMP has to be set,
to keep the common case lockless. |
