| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: sysfs: add lock to bos_descriptors_read()
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB read from firmware IE lengths in connect event
The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len
fields in ath6kl_wmi_connect_event_rx() are not validated against the
buffer length. Their sum (up to 765) can exceed the actual WMI event
data, causing out-of-bounds reads during IE parsing and state corruption
of wmi->is_wmm_enabled.
Add a check that the total IE length fits within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate DFS referral PathConsumed
parse_dfs_referrals() validates that the response contains the fixed
referral entry array and, on for-next, the per-referral string offsets.
However, the response also contains a PathConsumed value that is later
used for DFS path parsing.
If a malformed response provides a PathConsumed value larger than the
search name, later DFS parsing can advance beyond the end of the path.
Validate PathConsumed against the search name length before storing it in
the parsed referral. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: drop incoming messages that cross network namespace boundaries
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: restrict socket creation to the initial network namespace
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code). |
| phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains an authorization bypass vulnerability that allows category-restricted editors to manage attachments of FAQs outside their categories by supplying arbitrary record IDs. Attackers in medium permission mode can send upload or delete requests with a target record_id or attachment ID to tamper with or remove files on unauthorized FAQs. |
| A security vulnerability has been detected in itsmeravitejak Online-Examination-System up to e6208e630b14657999bbfe4c9912302d2a1e2449. This affects the function MySQLDB::valid/MySQLDB::getresults/MySQLDB::noresults/MySQLDB::getExams/MySQLDB::latestExamID/MySQLDB::getreport of the file results.php/include/database.php. The manipulation of the argument id/user/topic leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.118.0 and 16.27.0, certain endpoints in the Sales Person-wise Transaction Summary report fail to enforce proper authorization checks. When a role-limited authenticated user requests the affected financial report, the query can query financial transaction rows without applying the requesting user's document permission match conditions. This allows the user to read financial data beyond the user's permitted role. This issue is fixed in versions 15.118.0 and 16.27.0. |
| FOSSBilling is an open source billing and client-management platform. From 0.8.4 until 0.8.6, hasManagePermission fails open for inactive non-core modules because its early return on !isExtensionActive skips the module-access and manage_settings checks. A low-privileged staff account with module-level extension access targets a deactivated non-core module through extension/config_get or extension/config_save. The account can call api/admin/extension/config_get or api/admin/extension/config_save for a deactivated non-core module to read decrypted retained extension secrets and overwrite stored extension configuration. The getConfig function returns the decrypted stored configuration despite the module's inactive state. This residual path remained after the earlier CVE-2026-62962 authorization fix. This issue is fixed in version 0.8.6. |
| Frappe CRM before 1.81.2 contains a missing authorization vulnerability that allows authenticated Sales Users to access other users' CRM Notification records due to absent permission hooks. Attackers can query frappe.client endpoints filtering on to_user or call mark_as_read with another user argument to read, mark read, or delete others' notifications. |
| Thelia before 3.1.5 and 3.2.x before 3.2.4 contains a business logic vulnerability that allows authenticated customers to bypass coupon usage limits because usage is counted only when orders become paid. Attackers can place multiple pay-later orders while a usage remains, or cancel paid orders to inflate max_usage, gaining unlimited discounts. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, an attacker can send an absolute-form request that causes Request.scheme to use attacker-controlled request-target scheme data instead of the connection protocol. Applications that use Request.scheme for security decisions can consequently be tricked into treating an unencrypted connection as encrypted or an encrypted connection as unencrypted. This issue is fixed in version 3.14.4. |
| Deleting a label compared the ID of the repository in the request against the organization ID of organization labels, and the two ID sequences overlap. A user with write access to the issues of a repository could therefore delete the labels of an organization that has the same numeric ID as that repository. Labels are now deleted only within their own repository or organization. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: unregister sysctl before tearing down listen socket
rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via
rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since
rds_tcp_skbuf_handler() derives the netns from
rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with
netns teardown and dereference the freed socket/sk.
KASAN reports the race as:
BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0
rds_tcp_skbuf_handler net/rds/tcp.c:721
proc_sys_call_handler fs/proc/proc_sysctl.c
vfs_write fs/read_write.c
__x64_sys_pwrite64 fs/read_write.c
Fix this by unregistering the RDS TCP sysctl table before calling
rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl
handlers from starting and waits for in-flight handlers to finish, so
the listen socket can then be released safely. The fix was tested
against the linked reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Hold a dma-buf reference for imported BOs
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
(cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()
The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only
valid while the lock is still being held. Once xa_unlock_irqrestore is
called and returned, the pointer is no longer under lock and is subject
to modification. Since, the caller still dereferences vm->task_info in
amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a
use after unlock problem.
Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid()
through removing the amdgpu_vm_get_vm_from_pasid() function from
amdgpu_vm.c and making the relevant code inline to hold the lock while
it is still in use.
(cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: drain a slave's callback before its master detaches it
snd_timer_close_locked() drains the closing instance's own in-flight
callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a
master instance is closed, remove_slave_links() clears each slave's
->timer; the slave's own close then reads timer == NULL and takes the
branch that skips the drain entirely (snd_timer_stop_slave() also no-ops
on a NULL timer). So a slave whose callback is still running when the
master is closed is freed underneath the live callback, leading to
use-after-free.
Drain the slaves too before remove_slave_links() severs them.
snd_timer_stop() has already taken this instance off the active list, so
no new slave callback can be queued. Take the slaves off the ack list so
a pending one can't fire either, then wait for any that is already in
flight. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Protect UUID list traversal
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion. |
