| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/irq: Fix missing r2 clobber in PCREL inline assembly
In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC
pointer and is available as a caller-saved register [0].
Both call_do_irq() and call_do_softirq() use inline assembly to call
functions with stack switching, but fail to list r2 in their clobber
lists. This causes the compiler to assume r2 is preserved across these
calls, leading to register corruption when the called functions
(__do_irq and __do_softirq) clobber r2.
As a result of this kernel crash during interrupt handling is seen and
the kernel fails to boot:
BUG: Unable to handle kernel data access on write at 0xc000000404697638
Faulting instruction address: 0xc0000000000181ec
Oops: Kernel access of bad area, sig: 11 [#1]
NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0
With older GCC, the compiler would conservatively allocate
callee-saved registers (like r31) for values spanning function calls,
accidentally avoiding the bug:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f8 ff e1 fb std r31,-8(r1)
f0 ff c1 fb std r30,-16(r1)
2d 03 10 06 pla r31,53297316
...
3d e8 ff 4b bl c0000000000165ac <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 4d e9 ld r10,40(r13)
40 00 21 38 addi r1,r1,64
2a f9 aa 7f stdx r29,r10,r31
With newer GCC 14, the compiler uses r2 for such values, exposing the
missing clobber specification:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f0 ff c1 fb std r30,-16(r1)
f8 ff e1 fb std r31,-8(r1)
29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs>
...
85 dc ff 4b bl c000000000015ee0 <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 2d e9 ld r9,40(r13)
30 00 21 38 addi r1,r1,48
2a 11 c9 7f stdx r30,r9,r2
Fix this by adding r2 to the clobber list for both call_do_irq() and
call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled.
[0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: only stop PTP if it was initialized
fec_ptp_init() is only called when fep->bufdesc_ex is available.
However, fec_probe() unconditionally calls fec_ptp_stop() on the
failed_init path, and fec_drv_remove() unconditionally calls
fec_ptp_stop() during device removal.
Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths
to avoid stopping PTP when it was not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: usbatm: fix invalid ci_range initialization
syzbot reported a shift-out-of-bounds in __vcc_connect():
UBSAN: shift-out-of-bounds in net/atm/common.c:382:32
shift exponent -1 is negative
CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
ubsan_epilogue+0xa/0x30 lib/ubsan.c:233
__ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494
__vcc_connect+0x14b4/0x19c0 net/atm/common.c:382
vcc_connect+0x328/0x8f0 net/atm/common.c:498
pvc_bind+0x272/0x380 net/atm/pvc.c:52
__sys_bind+0x2e3/0x410 net/socket.c:1976
__x64_sys_bind+0x7a/0x90 net/socket.c:1979
...
ATM device ci_range fields (vpi_bits and vci_bits) represent the
number of bits supported for VPI and VCI addressing on the device.
net/atm/common.c directly uses these fields as bit shift counts:
vpi >> dev->ci_range.vpi_bits
vci >> dev->ci_range.vci_bits
1 << vcc->dev->ci_range.vpi_bits
1 << vcc->dev->ci_range.vci_bits
usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to
ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a
sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit
count. Shifting by -1 is undefined behavior and triggers UBSAN
warnings.
ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits
for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as
done by solos-pci. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: move hardware offload step after building the chain blob
Allocate the chain blob before the ruleset offload to reduce chances of
entering an inconsistent state where the offloaded ruleset in the nic
and the software ruleset differ. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: st33zp24: Return zero on status read failure
st33zp24_status() ignores the result of the transport read and returns
data even when no byte was received. The I2C transport, for example,
skips i2c_master_recv() when the register-select write is short or fails,
leaving data uninitialized. The resulting stack value can be interpreted
as TPM_STS flags and let status checks complete spuriously.
The status callback cannot propagate a transport error. Return zero
unless recv() reports exactly one byte. With no status bits set, callers
retry or take their existing timeout or error path instead of acting on
an invalid status value.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 123.154926] Call Trace:
[ 123.155172] <TASK>
[ 123.155419] ? __pfx_mutex_lock+0x10/0x10
[ 123.156181] ? __pfx__raw_spin_lock+0x10/0x10
[ 123.156571] nullb_group_make_group+0x20/0x100 [null_blk]
[ 123.157011] configfs_mkdir+0x47b/0xc70
[ 123.157337] ? __pfx_configfs_mkdir+0x10/0x10
[ 123.157719] ? may_create_dentry+0x242/0x2e0
[ 123.158061] vfs_mkdir+0x2a9/0x6c0
[ 123.158352] filename_mkdirat+0x3dc/0x500
[ 123.158710] ? __pfx_filename_mkdirat+0x10/0x10
[ 123.159070] ? strncpy_from_user+0x3a/0x1d0
[ 123.159413] __x64_sys_mkdir+0x6b/0x90
[ 123.159760] do_syscall_64+0xea/0x600
Replace the runtime mutex_init(&lock) with a static DEFINE_MUTEX(lock)
declaration to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: Restore DAIF state on error
Sashiko AI has reported that if swsusp_mte_save_tags() for some reason
fails we return from swsusp_arch_suspend() with DAIF being masked -
that is not what we'd expect. Restore the saved DAIF state before
returning from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT
on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves
CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard
IRQ context.
On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping
sighand->siglock:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
rt_spin_lock from lock_task_sighand
lock_task_sighand from run_posix_cpu_timers
run_posix_cpu_timers from update_process_times
ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M.
ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove
32bit KVM host support"), so the select need not be conditional on KVM.
Select it to defer POSIX CPU timer expiry to task context.
Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path
is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers
created with timer_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: lp5860: Fix a potential double-unlock
In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked
mutex is unlocked another time.
Slightly rework how the lock is taken/released to avoid this potential
double unlock. |
