| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: don't check the listener's sk_err in vsock_accept()
Syzbot reported an issue which can be reproduced with these steps:
r0 = socket(AF_VSOCK, SOCK_STREAM, 0)
bind(r0, {VMADDR_CID_ANY, PORT})
connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect)
listen(r0, backlog) -> 0
r1 = socket(AF_VSOCK, SOCK_STREAM, 0)
connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0
accept(r0) -> -1, EPROTO (stale sk_err)
Basically, it creates a socket (r0) and triggers a self-connect after
binding it. This self-connect fails with EPROTO because it loops back
to r0 while the socket is still in the TCP_SYN_SENT state, causing it
to be incorrectly dispatched to the connecting-client path. The
unexpected packet type encountered there sets sk_err to EPROTO.
After that, it invokes a listen() call on the same socket. This
listen() call succeeds because the kernel's listening path never
inspects or clears sk_err. Then, a new socket (r1) is created as a
normal client and connects to r0. However, vsock_accept() rejects this
incoming connection because the listener's sk_err still holds the
EPROTO error from the earlier failed self-connect.
This rejection causes the child socket created for r1's connection to
never be freed on virtio or hyperv transports; only the VMCI transport
implements pending_work to revisit and clean up a rejected socket.
For a non-blocking connect(), vsock_connect() may return -EINPROGRESS
immediately, and vsock_connect_timeout() can later set sk->sk_err
asynchronously.
Since no vsock transport ever sets sk_err on a socket while it is in
TCP_LISTEN state, checking it in vsock_accept() serves no purpose and
only carries forward errors left behind by earlier, unrelated
connection attempts on the same socket. Remove the checks so accept()
no longer rejects valid incoming connections because of a stale
error, which also avoids the resource leak described above. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: account classifier filter allocations to memcg
Allocations in the tc classifier *_change() paths (filter objects,
per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without
__GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside
memcg charging. The shared tcf_exts_init_ex() action array allocation in
cls_api.c was also uncharged; this patch closes it along with the
per-classifier filter-object/percpu/aux allocations that remain
unaccounted.
Add GFP_KERNEL_ACCOUNT to:
- the shared tcf_exts_init_ex() action array (cls_api.c), common to every
filter of every classifier (32 pointers, 256 bytes);
- the filter-object, per-CPU-counter, and per-filter aux allocations in
cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw,
cls_matchall, cls_route and cls_u32;
- the u32_init_knode() replace-path knode allocation (cls_u32.c), which
allocates the same struct tc_u_knode + sel.keys on every replace of an
existing knode and was missed by the create-path-only conversion.
Also fix the cls_basic error path: basic_change() inserts fnew into the
IDR before allocating the per-CPU counter. If alloc_percpu() fails the
errout path kfree'd fnew without idr_remove, leaving a dangling pointer
in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable
on demand (memcg at memory.max), making the dead path attacker-reachable
and burning the handle permanently. Add the idr_remove on the percpu
failure path, matching the basic_set_parms failure-path pattern.
Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to
extend to the other classifiers.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used),
CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS.
- Unprivileged user in a fresh user+network namespace (unshare -Urn),
or root with CAP_NET_ADMIN.
- Create a large number of tc filters (e.g. tc filter add dev lo
ingress ... <classifier> ...) while watching a memcg-limited cgroup:
system slab grows far faster than memory.current, pinning kernel
memory outside memcg charging. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the KIQ ring fences on reset
Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a
polling fence, so it is skipped by the force-completion loop in
amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and
survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a
reset the first KIQ submission can poll forever on a seq that is never written
back.
Force complete the KIQ ring fences too so their hw fence is realigned to
sync_seq. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00% |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
