| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xps: reject an out of range traffic class
Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and
dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc()
lowers dev->num_tc without touching either array.
netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and
netdev_get_prio_tc_map() returns the entry as it stands, so a leftover
entry is handed out as a traffic class >= dev->num_tc. Taking that
class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a
negative one and indexes an XPS map sized for dev->num_tc classes:
tci = j * num_tc + tc;
RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map);
attr_map[] holds nr_ids * num_tc entries and j runs over the ids named
in the mask, so a class that is not below num_tc pushes tci past the end
of the map for the last ids and the store overruns it.
Any caller that lowers num_tc leaves such entries behind, and
mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than
netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7]
still describe txq 1..7. The splat is from an XPS write to txq 2 on a
veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and
j == 6 stores one past the end of the 88-byte map:
BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954)
Write of size 8 at addr ffff88813016bc58 by task xps_oob/634
__netif_set_xps_queue (net/core/dev.c:2954)
xps_rxqs_store (net/core/net-sysfs.c:1880)
netdev_queue_attr_store (net/core/net-sysfs.c:1390)
Allocated by task 634:
__kmalloc_noprof (mm/slub.c:5439)
__netif_set_xps_queue (net/core/dev.c:2937)
The buggy address is located 0 bytes to the right of
allocated 88-byte region [ffff88813016bc00, ffff88813016bc58)
Reject a class the map has no room for. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
| The Getwid – Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data-image-points' parameter in all versions up to, and including, 3.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The 10Web Booster – Website speed optimization, Cache & Page Speed optimizer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'author' parameter in all versions up to, and including, 2.34.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable because a comment author Name value containing ' src=' and an event-handler payload contains no HTML tags or quote characters, allowing it to survive WordPress core's sanitize_text_field and land verbatim inside the alt attribute, where the plugin's own str_replace subsequently injects the single quote that breaks out of the attribute context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb->csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place. |
| A flaw was found in Hibernate Reactive. When an HTTP endpoint is exposed to perform database operations, a remote client can prematurely close the HTTP connection. This action may lead to leaking connections from the database connection pool, potentially causing a Denial of Service (DoS) by exhausting available database connections. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.9, an unauthenticated remote attacker can send an email to a monitored group or IMAP address, including an email-to-Case address, and place arbitrary HTML in its plain-text body. EspoCRM stores that body and renders it without escaping in Email Received stream notification emails sent to users following the related record, allowing HTML injection and, in mail clients that execute it, JavaScript execution. Earlier sanitization for Post and Mention notifications did not cover this notification path. This issue is fixed in version 9.3.9. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, Firewall Rules and NAT views place stored category names and alias descriptions into HTML title attributes in filter_rule.volt and nat_rule.volt without quote-safe encoding. The response layer uses ENT_NOQUOTES, so a double quote survives and closes the attribute, allowing an event-handler attribute to be added to the existing span. A user with Firewall Categories or Firewall Alias Edit privileges can store a category name or alias description; the category must be assigned to a filter or NAT rule, or the alias must be referenced by a rule source or destination, and the rule must be saved so the affected tooltip is rendered. Script then executes in the session of an administrator or other user who opens the affected Rules or NAT page. The script can access CSRF material and perform authenticated actions as the victim. This issue is fixed in version 26.1.11. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the OpenVPN connection-status dashboard widget in src/opnsense/www/js/widgets/OpenVPNClients.js and the connection-status view place a client common_name into data-common-name attributes without quote-safe encoding. Exploitation requires an OpenVPN server configured with username-as-common-name and RADIUS or LDAP authentication, plus the ability to provision or self-register a valid backend username containing a double quote; deployments where the same administrator controls both the identity backend and firewall do not cross a separate trust boundary. An authenticated client using that username can close the attribute and add an event handler, while the local user database is not affected because its username validator rejects quotes. Script executes in an administrator's session when the administrator opens the dashboard or connection-status page and the injected event is triggered; the demonstrated payload used pointer movement over the client row rather than unconditional page-load execution. The advisory demonstrates that the script can read config.xml, invoke privileged APIs, reset the root password, and obtain root command execution. This issue is fixed in version 26.1.11. |
| WeGIA is a web manager for charitable institutions. Prior to 3.8.6, the pre-installation web/instalador/instalador.php endpoint is reachable before config.php exists and processes unauthenticated installation POST data. In the Linux reinstall flow, a crafted usuario value reaches a command executed by shell_exec(). The installer also writes attacker-controlled values into executable config.php and concatenates the database name nomebd into a CREATE DATABASE statement. Successful exploitation can execute commands as the web-server user, persist attacker-controlled PHP configuration, and alter or disrupt the application and its data. This issue is fixed in version 3.8.6. |
| A vulnerability has been found in Wavlink WL-WN530BE2-A up to M30BE2_V250604. The affected element is the function sub_12580 of the file api.cgi of the component Login Processing. The manipulation of the argument REMOTE_ADDR leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2026-09-24-841a51c6d5_tclinux.bin is sufficient to fix this issue. You should upgrade the affected component. The vendor confirms: "We confirm the finding, and it has already been addressed. In the current firmware the api=info&client=app handler no longer builds a shell command: the login script is now invoked through an argument vector (execvp) instead of system(), and the client address is length-limited and null-checked." |
| FreeRDP versions 3.13.0 before 3.32.0 contain a resource retention flaw in drive_process_irp_create, which registers an opened local file in the drive dictionary before applying the allocation size and does not remove it when that operation fails. A malicious RDP server connected to a client with drive redirection enabled can send IRP_MJ_CREATE with AllocationSize set to UINT64_MAX, forcing the seek to fail and leaking the file object and operating-system handle until drive teardown. |
| A security vulnerability has been detected in Praat up to 7.0.02. Affected is the function whisper_model_load of the file external/whispercpp/whisper.cpp of the component Model Loader. The manipulation of the argument n_dims leads to out-of-bounds write. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is a910d21a2705ef4cd16d91f29cdc8da1ab1a7221. To fix this issue, it is recommended to deploy a patch. The project maintainer confirms: "We did a quick fix (suggested fix 1) for Praat version 7.0.03, and scheduled a better fix (suggested fix 2)." |
| In the Linux kernel, the following vulnerability has been resolved:
HID: winwing: fix use-after-free in force feedback teardown
winwing_init_ff() passes the driver's private data, allocated with
devm_kzalloc() in winwing_probe(), as the effect context to
input_ff_create_memless(). The memoryless force-feedback core takes
ownership of that pointer and frees it with kfree() from
input_ff_destroy() (ml_ff_destroy()) when the input device is
destroyed.
Freeing a devm-managed allocation with kfree() is an invalid free, and
the same object is then released again by devres when the HID device is
torn down, a double free. As the allocation also embeds the LED class
devices, their timers and work item live on freed memory and the slab
gets corrupted. This triggers on unbind, rmmod, hot-unplug and on system
suspend, where the firmware cache walks the now-corrupt devres list.
KASAN reports:
BUG: KASAN: invalid-free in input_ff_destroy
Allocated by task N:
winwing_probe
Pass NULL as the memless context instead and fetch the driver data from
the input device in winwing_play_effect(): the HID core already stores
the hid_device as the input device's drvdata. The force-feedback core
then owns nothing that it must not free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| The WP Photo Album Plus plugin for WordPress is vulnerable to Stored Cross-Site Scripting via REQUEST_URI Session History in all versions up to, and including, 9.3.03.002 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The bypass works because esc_url_raw() strips literal angle brackets but retains HTML entities, which wppaEntityDecode() silently converts back to live HTML tags before jQuery('#wppa-modal-container').html() renders them. |
| A flaw was found in DPDK lib/vhost. Memory size is not adequately validated before mmap during vhost memory-region setup, which can lead to a host crash or memory corruption. |
| libzvbi through 0.2.45 contains an out-of-bounds write vulnerability in the Teletext decoder that allows attackers to corrupt memory by supplying unvalidated DRCS pixel-mode values in X/28/3 packets. Attackers can send a crafted Teletext stream decoded via vbi_decode with every slot set to DRCS_MODE_6_5_4, causing convert_drcs to overflow chars[48][60] and crash the application. |
