| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial of service vulnerability in the Qualcomm FUSE file system could enable a remote attacker to use a specially crafted file to cause a device hang or reboot. This issue is rated as High due to the possibility of remote denial of service. Product: Android. Versions: Kernel-3.10, Kernel-3.18. Android ID: A-30786860. References: QC-CR#586855. |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| Cybozu Office 9.0.0 through 10.4.0 allows remote attackers to cause a denial of service. |
| The check_allocations function in libass/ass_shaper.c in libass before 0.13.4 allows remote attackers to cause a denial of service (memory allocation failure) via unspecified vectors. |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. |
| A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441. |
| Node.js was affected by OpenSSL vulnerability CVE-2017-3737 in regards to the use of SSL_read() due to TLS handshake failure. The result was that an active network attacker could send application data to Node.js using the TLS or HTTP2 modules in a way that bypassed TLS authentication and encryption. |
| The bnep_add_connection function in net/bluetooth/bnep/core.c in the Linux kernel before 3.19 does not ensure that an l2cap socket is available, which allows local users to gain privileges via a crafted application. |
| A HTTP/2 implementation built using any version of the Python HPACK library between v1.0.0 and v2.2.0 could be targeted for a denial of service attack, specifically a so-called "HPACK Bomb" attack. This attack occurs when an attacker inserts a header field that is exactly the size of the HPACK dynamic header table into the dynamic header table. The attacker can then send a header block that is simply repeated requests to expand that field in the dynamic table. This can lead to a gigantic compression ratio of 4,096 or better, meaning that 16kB of data can decompress to 64MB of data on the target machine. |
| A HTTP/2 implementation built using any version of the Python priority library prior to version 1.2.0 could be targeted by a malicious peer by having that peer assign priority information for every possible HTTP/2 stream ID. The priority tree would happily continue to store the priority information for each stream, and would therefore allocate unbounded amounts of memory. Attempting to actually use a tree like this would also cause extremely high CPU usage to maintain the tree. |
| Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| Cisco Data Center Network Manager is affected by Excessive Logging During a TCP Flood on Java Ports. If the size of server.log becomes very big because of too much logging by the DCNM server, then the CPU utilization increases. Known Affected Releases: 5.2(1). Known Fixed Releases: 6.0(0)SL1(0.14) 5.2(2.73)S0. Product identification: CSCtt15295. |
| The dynamicGetbuf function in the GD Graphics Library (aka libgd) before 2.2.4 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted TIFF image. |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| A Denial of Service Vulnerability in 802.11 ingress packet processing of the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause the connection table to be full of invalid connections and be unable to process new incoming requests. More Information: CSCvb66659. Known Affected Releases: 8.2(130.0). Known Fixed Releases: 8.2(131.10) 8.2(131.6) 8.2(141.0) 8.3(104.56) 8.4(1.88) 8.4(1.91). |
| A Denial of Service Vulnerability in 802.11 ingress connection authentication handling for the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause authentication to fail. Affected Products: This vulnerability affects Cisco Mobility Express 2800 Series and 3800 Series Access Points when configured in local mode in 40 MHz. More Information: CSCvb33575. Known Affected Releases: 8.2(121.12) 8.4(1.82). Known Fixed Releases: 8.2(131.2) 8.2(131.3) 8.2(131.4) 8.2(141.0) 8.3(104.53) 8.3(104.54) 8.4(1.80) 8.4(1.85). |
| A vulnerability in the data plane IP fragment handler of the Cisco Adaptive Security Appliance (ASA) CX Context-Aware Security module could allow an unauthenticated, remote attacker to cause the CX module to be unable to process further traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of IP fragments. An attacker could exploit this vulnerability by sending crafted fragmented IP traffic across the CX module. An exploit could allow the attacker to exhaust free packet buffers in shared memory (SHM), causing the CX module to be unable to process further traffic, resulting in a DoS condition. This vulnerability affects all versions of the ASA CX Context-Aware Security module. Cisco has not released and will not release software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCva62946. |
