| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: guard io_size EOF trim against concurrent truncate underflow
iomap: fix zero padding data issue in concurrent append writes
changed ioend accounting so that io_size tracks only valid data
within EOF. This trims io_size when a writeback range extends
past end_pos:
ioend->io_size += map_len;
if (ioend->io_offset + ioend->io_size > end_pos)
ioend->io_size = end_pos - ioend->io_offset;
However, if end_pos ends up below ioend->io_offset, the subtraction
becomes negative and is stored in size_t io_size, causing an unsigned
wrap to a huge value. This can happen when writeback continues past
byte-level EOF up to a block-aligned range, or when a concurrent
truncate shrinks the file after end_pos was sampled in
iomap_writeback_handle_eof().
A wrapped io_size can mislead append detection and corrupt
completion-time size handling, since filesystem end_io paths consume
io_size for decisions such as on-disk EOF updates and unwritten/COW
completion ranges.
Fix this by clamping io_size to zero when EOF has moved to or before
the ioend start offset. This preserves the original intent of trimming
io_size to valid in-EOF data while avoiding the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch
In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd
and non-rsvd hugetlb cgroup charges. When map_chg is set,
hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but
the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg
with the non-rsvd cgroup pointer.
As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong
(non-rsvd) cgroup pointer into the folio's rsvd slot.
When the folio is later freed, free_huge_folio() unconditionally calls
both hugetlb_cgroup_uncharge_folio() and
hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the
wrong cgroup from the folio and decrements a counter that was never
charged for that cgroup, causing a page_counter underflow:
page_counter underflow: -512 nr_pages=512
WARNING: mm/page_counter.c:61 at page_counter_cancel
Fix this by introducing a separate h_cg_rsvd pointer exclusively for the
rsvd charge path, keeping the rsvd and non-rsvd charges fully independent
through their charge, commit, and error uncharge paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ieee80211: validate MLE common info length
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
[remove now misleading comment] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. At advertise time the
flags are still prepended, and the memcpy() writes 3 + adv_data_len
bytes into the size-byte buffer:
BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301)
Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65
Workqueue: hci0 hci_cmd_sync_work
__asan_memcpy (mm/kasan/shadow.c:106)
eir_create_adv_data (net/bluetooth/eir.c:301)
hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310)
hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:332)
This frame has 1 object:
[32, 64) 'cp'
The "Flags" structure is added by the kernel, not requested by
userspace, so only prepend it when it fits together with the instance
advertising data; when there is no room for both, drop the flags rather
than the user-provided data.
Reachable by a local user with CAP_NET_ADMIN owning an LE-only
controller on the legacy advertising path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
nvmet_execute_disc_get_log_page() validates only the dword alignment
of the host-supplied Log Page Offset (lpo). The 64-bit offset is then
added to a small kzalloc'd buffer that holds the discovery log page
and the result is passed straight to nvmet_copy_to_sgl(), which
memcpy()s data_len bytes out to the host with no source-side bound
check:
u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */
size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */
...
if (offset & 0x3) { ... } /* only check */
...
alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req);
buffer = kzalloc(alloc_len, GFP_KERNEL);
...
status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len);
The Discovery controller is unauthenticated -- nvmet_host_allowed()
returns true unconditionally for the discovery subsystem -- so the call
is reachable pre-authentication by any TCP/RDMA/FC peer that can reach
the nvmet target. With a discovery log page of ~1 KiB, an attacker
requesting up to 4 KiB starting at offset == alloc_len reads the next
slab page out and gets its content returned over the fabric (an
empirical run on a default nvmet-tcp loopback target leaked 81
canonical kernel pointers in one Get Log Page response). Pointing the
offset at unmapped kernel memory faults the in-kernel memcpy and
crashes (or panics, on panic_on_oops=1) the target host instead.
The attacker-controlled source-side offset pattern
"nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique
to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every
other Get Log Page handler in admin-cmd.c either ignores lpo (and
silently starts every response at offset 0) or tracks a local
destination offset with a fixed source pointer.
Validate the host-supplied offset against the log page size, cap the
copy length to what is actually available, and zero-fill any remainder
of the host transfer buffer. The zero-fill matches the existing
short-response pattern in nvmet_execute_get_log_changed_ns()
(admin-cmd.c) and prevents leaking transport SGL contents when the
host asks for more bytes than the log page contains. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/rstat: validate cpu before css_rstat_cpu() access
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
