| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Initialize re_id before removal registration
rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client
before returning the new rdma_cm_id to rpcrdma_ep_create(). However
rpcrdma_ep_create() currently stores that pointer in ep->re_id only
after rpcrdma_create_id() returns.
A local administrator can race an NFS/RDMA mount against RDMA device
removal. If rpcrdma_remove_one() observes the just-registered
notification before rpcrdma_ep_create() assigns ep->re_id,
rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL).
The tracepoint dereferences id->device->name and copies
id->route.addr.dst_addr, so the callback can crash the kernel with a
NULL pointer dereference.
Store the rdma_cm_id in ep->re_id immediately before publishing
ep->re_rn. The existing error path still destroys the id directly if
registration fails; ep is then freed by the caller without using
ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: link kn to its parent before the LSM init hook
After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"),
kernfs_xattr_set() and kernfs_xattr_get() compute the cache via
kernfs_root(kn) before any other check. kernfs_root(kn) walks
kn->__parent first and falls back to kn->dir.root, both of which are
NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set
in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root
is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir().
The LSM kernfs_init_security hook is invoked from inside
__kernfs_new_node(), before either field has been initialized.
selinux_kernfs_init_security() ends with kernfs_xattr_set(kn,
XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and
&((struct kernfs_root *)NULL)->xa_cache evaluates to
offsetof(struct kernfs_root, xa_cache) which faults:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
RIP: 0010:simple_xattr_set+0x27/0x8b0
Call Trace:
kernfs_xattr_set+0x63/0xb0
selinux_kernfs_init_security+0x13b/0x270
security_kernfs_init_security+0x36/0xc0
__kernfs_new_node+0x182/0x290
kernfs_new_node+0x80/0xc0
kernfs_create_dir_ns+0x2b/0xa0
cgroup_create+0x116/0x380
cgroup_mkdir+0x7c/0x1a0
Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled
distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled
parent panics the kernel.
The LSM hook's contract is that the kn_dir argument is the parent of
the new kn, so kn->__parent should already point at kn_dir when the
hook runs. Move kernfs_get(parent) and rcu_assign_pointer of
kn->__parent from kernfs_new_node() into __kernfs_new_node() right
before the security hook, and unwind the parent reference on the
err_out4 path. kernfs_root(kn) then takes its parent branch during
the hook and returns parent->dir.root, which is the correct root.
This also closes the same-shape latent bug in kernfs_xattr_get() (which
today is hidden only by kernfs_iattrs_noalloc() returning NULL on a
fresh kn). |
| Incus is a system container and virtual machine manager. Prior to version 7.1.0, `(*backend).CreateCustomVolumeFromBackup` in `internal/server/storage/backend.go` contains an unguarded `*time.Time` dereference on the `ExpiresAt` field of every volume-snapshot entry in an imported custom-volume backup. An authenticated user with `can_create_storage_volumes` permission on any project can crash the `incusd` daemon by uploading a backup tarball whose `volume_snapshots[*].expires_at` field is absent. This is a sibling-field variant of GHSA-r7w7-mmxr-47r9 (CVE-2026-40197). Commit `985a1dedf9f3e7ba729c93b654905ed510de25c2` added `if s == nil` at the top of the loop body, but did not guard the adjacent `*snapshot.ExpiresAt` deref 19 lines later. Every other consumer of `Config.VolumeSnapshots[i].ExpiresAt` in this same file already gates the deref with a nil-check — the asymmetric guard is the bug. Version 7.1.0 contains an updated patch. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return. |
| A flaw was found in mod_cluster's AdvertiseListenerImpl (org.jboss.modcluster core module). A single crafted UDP multicast datagram with a valid HTTP status line and a "Server:" header but without the "Date:", "Digest:", and "Sequence:" headers triggers a NullPointerException in verifyDigest() that is not caught by the worker thread's exception handler. This causes the advertise listener thread to terminate permanently. The failure is silent (isListening() continues to return true) and persists until the node is restarted. The crash occurs before the AdvertiseSecurityKey comparison, so deployments with a configured security key are still affected. |
| A NULL
pointer dereference vulnerability exists in the HTTP request parsing
functionality of
TL-MR6400 v7. An unauthenticated remote attacker can
trigger the vulnerability by sending a specially crafted HTTP request
containing a malformed session cookie header.
Successful
exploitation may cause the HTTP service process to crash, resulting in a
denial-of-service condition and temporary loss of management or CGI
functionality until service recovery. |
| Incus is a system container and virtual machine manager. Prior to version 7.1.0, `(*backend).CreateInstanceFromBackup` in `internal/server/storage/backend.go` contains a nil-pointer dereference that an authenticated user with permission to create instances in any project can trigger remotely by uploading a crafted backup tarball. The Incus daemon panics and the process crashes, causing denial of service to every project on that cluster member. This is a sibling of `GHSA-fwj8-62r8-8p8m`, `GHSA-r7w7-mmxr-47r9`, and `GHSA-x5r6-jr56-89pv` (all assigned 2026-05-04). Those patches added guards on adjacent fields of the same `backup/config.Config` struct; the `Volume` field on the instance-import path was missed. Version 7.1.0 contains an updated patch. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.1, JNI-backed XXHash implementations fail to validate the byte array object and the off and len arguments in XXHashFactory.nativeInstance().hash32().hash(), XXHashFactory.nativeInstance().hash64().hash(), XXHashFactory.nativeInstance().newStreamingHash32().update(), and XXHashFactory.nativeInstance().newStreamingHash64().update(), allowing null arrays or oversized ranges to reach native code, read outside the Java array, and fatally terminate the JVM. This issue is fixed in version 1.11.1. |
| Adaguc-server is an open source geographical information system to visualize, combine, compare and share real-time meteorological, climatological and remote sensing data via OGC standards. Versions prior to 7.2.2 crash with a memory-safety fault when it parses a GeoJSON document whose geometry contains a malformed coordinate. The coordinate parser in `adagucserverEC/CConvertGeoJSON.cpp` indexes `pt.u.array.values[0]` and `pt.u.array.values[1]` and uses `polygon.u.array.length` as a loop bound without first validating the JSON node type or the coordinate length. A coordinate that is an empty array, a one-element array, a scalar, or `null` leads to an out-of-bounds heap read or a NULL pointer dereference. The same unchecked pattern is present in four geometry branches: `Polygon`, `LineString`, `MultiLineString` and `MultiPolygon`. The vulnerable parser runs whenever the server processes a local GeoJSON file, either a configured GeoJSON dataset or a GeoJSON file exposed through the `AutoResource` feature and requested by an unauthenticated WMS request. A crafted GeoJSON file reliably crashes the backend process that handles that request. Version 7.2.2 patches the vulnerability. |
| A flaw was found in the `ipa-enrollment` SLAPI plugin. A remote authenticated client can exploit a null pointer dereference vulnerability by sending a malformed Lightweight Directory Access Protocol (LDAP) extended operation. By omitting the request value for the `JOIN_OID` in the `ipa-enrollment` extended operation, an attacker can trigger a server crash, potentially causing a denial of service. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a NULL pointer dereference. |
| Wekan is open source kanban built with Meteor. Prior to 10.38, the /api/boards/:boardId/export, /api/boards/:boardId/attachments/:attachmentId/export, /api/boards/:boardId/export/csv, and /api/boards/:boardId/exportExcel handlers in models/export.js and models/exportExcel.js looked up a user from the attacker-controlled authToken query parameter and immediately called user._id.toString() without checking whether ReactiveCache.getUser() returned undefined. A request for a private board with an unknown token therefore threw a TypeError from an asynchronous route, producing an unhandled rejection that could terminate the Wekan process and deny service to all users. Version 10.38 adds a 401 guard after every export token lookup and wraps export handlers with safeRoute() so unexpected exceptions become controlled responses. This issue is fixed in version 10.38. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump
inet6_dump_fib() saves its progress in cb->args[1] as a positional
index within the current hash chain. Between batches, a concurrent
fib6_new_table() can insert a new table at the chain head, shifting
all existing entries. The saved index then lands on a different
table, causing fib6_dump_table() to set w->root to the wrong table
while w->node still points into the previous one.
fib6_walk_continue() dereferences w->node->parent (NULL) and panics:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:fib6_walk_continue+0x6e/0x170
Call Trace:
<TASK>
fib6_dump_table.isra.0+0xc5/0x240
inet6_dump_fib+0xf6/0x420
rtnl_dumpit+0x30/0xa0
netlink_dump+0x15b/0x460
netlink_recvmsg+0x1d6/0x2a0
____sys_recvmsg+0x17a/0x190
Fix by storing tb->tb6_id in cb->args[1] instead of a positional
index. On resume, skip entries until the id matches; a concurrent
head-insert can never match the saved id, so the walker always
resumes on the correct table. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
ffa_partition_info_get() passes uuid_str directly to uuid_parse()
without a NULL check. When a caller passes NULL, uuid_parse() ->
__uuid_parse() -> uuid_is_valid() dereferences the pointer, causing
a kernel panic:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000040
| pc : uuid_parse+0x40/0xac
| lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa]
Add a NULL guard before uuid_parse() so a NULL argument returns
-ENODEV instead of crashing. Callers are expected to always supply
a valid partition UUID, so NULL is not a supported input. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Call trace:
ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P)
ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k]
ath11k_core_restart+0x40/0x168 [ath11k]
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 |
| A remote code execution vulnerability exists in Microsoft SharePoint Server when it fails to properly identify and filter unsafe ASP.Net web controls. An authenticated attacker who successfully exploited the vulnerability could use a specially crafted page to perform actions in the security context of the SharePoint application pool process.
To exploit the vulnerability, an authenticated user must create and invoke a specially crafted page on an affected version of Microsoft SharePoint Server.
The security update addresses the vulnerability by correcting how Microsoft SharePoint Server handles processing of created content. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix devconf_all NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the devconf_all is
never initialized because inet6_init() exits before addrconf_init() is
called which initializes it. bond_send_validate(), however, will still
call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to
NULL derefence of net->ipv6.devconf_all in ip6_pol_route().
BUG: kernel NULL pointer dereference, address: 000000000000000c
[...]
Workqueue: bond0 bond_arp_monitor [bonding]
RIP: 0010:ip6_pol_route+0x69/0x480
[...]
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
? __pfx_ip6_pol_route_output+0x10/0x10
fib6_rule_lookup+0xfe/0x260
? wakeup_preempt+0x8a/0x90
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? sched_balance_rq+0x369/0x810
ip6_route_output_flags+0xd7/0x170
bond_ns_send_all+0xde/0x280 [bonding]
bond_ab_arp_probe+0x296/0x320 [bonding]
? srso_return_thunk+0x5/0x5f
bond_activebackup_arp_mon+0xb4/0x2c0 [bonding]
process_one_work+0x196/0x370
worker_thread+0x1af/0x320
? srso_return_thunk+0x5/0x5f
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x199/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by adding ipv6_mod_enabled() condition check in the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: Check resource mutex allocation
nfp_cpp_resource_find() allocates a CPP mutex handle for the matching
resource-table entry and then reports success. nfp_resource_try_acquire()
immediately passes that handle to nfp_cpp_mutex_trylock().
However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens
for a matching table entry, the resource lookup still returns success and
the following trylock dereferences a NULL mutex pointer while opening the
resource.
nfp_resource_acquire() already treats failure to allocate the table mutex
as -ENOMEM. Do the same for the resource mutex and fail the lookup before
publishing the rest of the resource handle.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
wan: wanxl: Only reset hardware after BAR mapping
wanxl_pci_init_one() stores the freshly allocated card in driver data
before the PLX BAR is mapped. Several early probe failures then unwind
through wanxl_pci_remove_one(), including failure to allocate the coherent
status area or to restore the DMA mask.
wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and
wanxl_reset() dereferences card->plx. On those early failures card->plx
is still NULL, so the error path can dereference a NULL MMIO pointer.
Only issue the hardware reset once the BAR mapping exists. The remaining
cleanup in wanxl_pci_remove_one() already checks whether later resources
were allocated.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst
is never initialized because inet6_init() exits before addrconf_init()
is called to initialize it. An attempt to bind an RDS socket to
an ipv6 address results in a crash in __ipv6_chk_addr_and_flags()
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0
Call Trace:
<TASK>
ipv6_chk_addr+0x3b/0x50
rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp]
rds_trans_get_preferred+0x15d/0x2d0 [rds]
? trace_hardirqs_on+0x2d/0x110
rds_bind+0x1433/0x1d60 [rds]
? rds_remove_bound+0xd50/0xd50 [rds]
? aa_af_perm+0x250/0x250
? __might_fault+0xde/0x190
? __sys_bind+0x1dc/0x210
__sys_bind+0x1dc/0x210
? __ia32_sys_socketpair+0x100/0x100
? restore_fpregs_from_fpstate+0x53/0x100
__x64_sys_bind+0x73/0xb0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f47f8269ea9
</TASK>
The following code reproduces the issue:
struct sockaddr_in6 addr;
s = socket(PF_RDS, SOCK_SEQPACKET, 0);
memset(&addr, 0, sizeof(addr));
inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(PORT);
bind(s, &addr, sizeof(addr));
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller. |
