| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper neutralization of special elements used in a command ('command injection') in Azure Pipelines allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the
adapter is already gone from the host configuration, ap_zapq() returns
AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in
vfio_ap_mdev_reset_queue()'s switch statement and falls through to
the default case, which issues a WARN but does not call
vfio_ap_free_aqic_resources(). As a result, if IRQ handling was
enabled for the queue by the guest, the KVM GISC registration and
the pinned guest page holding the notification indicator byte (NIB)
are both leaked.
This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as
AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in
vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL
indicates the queue is not operational and no further reset attempts
are possible; the correct action is to free the IRQ resources
immediately.
Problem 2:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check()
In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue
reset has not yet completed, in which case apq_reset_check() is queued to
a work queue to verify completion of the reset operation. This function
uses the PQAP(TAPQ) function to get the queue's status and calls
apq_status_check() to verify whether the reset has completed, failed or
needs to be executed again. As described in Problem #1 above,
apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL,
thereby potentially leaking KVM GISC registration and the pinned guest page
holding the NIB.
This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to
apq_status_check() and returning -ENODEV for that case. The caller,
apq_reset_check() will then check for this return code and call
vfio_ap_free_aqic_resources() to prevent the leak.
Problem 3:
~~~~~~~~~
vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL
vfio_ap_free_aqic_resources() guards the call to
kvm_s390_gisc_unregister() with:
if (q->saved_isc != VFIO_AP_ISC_INVALID &&
!WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm)))
If matrix_mdev->kvm is NULL -- which can happen when
vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a
subsequent cleanup path reaches this function -- the WARN_ON fires
and the entire block is skipped. This leaves q->saved_isc set to a
non-invalid value, creating a potential double-free on any subsequent
call to this function.
When kvm is NULL the KVM guest is already torn down, so
kvm_s390_gisc_unregister() need not and cannot be called; however,
q->saved_isc must always be cleared. Fix this by separating the
kvm_s390_gisc_unregister() call from the q->saved_isc reset. The
WARN_ON now guards only the genuinely impossible case of matrix_mdev
being NULL. A NULL kvm is handled gracefully by skipping only the
unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set
unconditionally whenever saved_isc was not already invalid.
Additionally, add an else clause to the host-config check in
vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources()
directly when the queue is not in the host's AP configuration. This
serves as a backstop: when the AP bus fires the driver .remove
callback after an adapter is removed from the host config, the queue
is by definition no longer addressable, so vfio_ap_mdev_reset_queue
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
Fix 3 leaks in macb_alloc() error paths:
- Tx buffer allocated but crossing a 4G boundary: Tx leaked.
- Rx buffer allocation fails: Tx leaked.
- Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked.
This is because our error handling calls macb_free(bp) which in turn
frees the buffers stored in bp->queues[0], but nothing has been stored
in there. Fix by storing allocated buffers into bp->queues[0] ASAP. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also not robust against other
KVM bugs, though that's kind of a moot point since any such bugs would show
up even if sev->active is never set. I.e. KVM must get that side of things
correct. But, that's not a great reason to add more code just to make
things marginally less robust. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl()
virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on
both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create()
error paths instead of dropping the reference it owns, so
obj->funcs->free() never runs and the virtio_gpu_object, the resource id
and the host-side resource are leaked.
Use drm_gem_object_put() instead. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. From 3.9.0 until 3.22.0, pristine manual FileRise installations without PERSISTENT_TOKENS_KEY or metadata/persistent_tokens.key can activate a published legacy compatibility key. If an attacker separately obtains ciphertext-bearing account or configuration files, the known fallback key can enable decryption of TOTP secrets or credentials. Docker installations already generated a unique persistent key, and existing installations are not automatically rotated because doing so could make encrypted state unreadable. This issue is fixed in version 3.22.0. |
| An Allocation of Resources Without Limits or Throttling vulnerability in rpd, the routing protocol daemon, of Juniper Networks Junos OS and Junos OS Evolved platforms allows an unauthenticated adjacent attacker to cause a denial of service and heap memory corruption via OSPFv3 messages on an enabled broadcast interface. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::FpySequencer STORE directive stack write validation the bounds check adds attacker-controlled offset and size before memcpy, allowing integer wraparound to make an out-of-range destination appear valid. When a sequence-controlled STORE directive supplies a stack offset and size whose U32 sum wraps, memcpy can write outside the sequencer stack, causing memory corruption, denial of service, and potentially code execution. This issue is fixed in version 4.2.0. |
| Cypht webmail 2.0.0 through 2.12.2 contains a DOM-based cross-site scripting vulnerability that allows remote attackers to execute arbitrary JavaScript by crafting malicious alt text or URL values in an HTML email's external image tag when ALLOW_EXTERNAL_IMAGE_SOURCES is enabled. Attackers can send a specially crafted email so that when the victim opens it, the externalResources.js code builds the blocked-image notice using innerHTML with decoded email-derived values, triggering script execution in the victim's authenticated session to read mailboxes, send email, or change settings. |
| A flaw has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this issue is the function sub_182B0 of the file /cgi-bin/mainfunction.cgi of the component CGI Interface. This manipulation of the argument usefile/usescript/option causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| filelock is a platform-independent file lock for Python. Prior to 4.2.1, UnixFileLock can truncate a regular file renamed onto the lock path when another local user has actual rename permission, or hard-linked there under a permissive hard-link policy; when an explicit mode is requested, affected versions from 3.10.2 can also change that file's mode. This issue is fixed in version 4.2.1. |
| A vulnerability was found in H3C Magic NX15 100R017. This issue affects the function sub_416874 of the file /usr/bin/usrlist. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix object leak when drm_gem_handle_create() fails
virtio_gpu_gem_create() owns the reference taken by
virtio_gpu_object_create(). On the drm_gem_handle_create() error path it
calls drm_gem_object_release() instead of dropping that reference.
drm_gem_object_release() is the inverse of drm_gem_object_init() and does
not touch the reference count or call obj->funcs->free(), so it is only
correct as the last step of a destructor, as in
virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1
with no remaining reference, so virtio_gpu_free_object() never runs and
the shmem pages, sg table and virtio_gpu_object are leaked. Since
virtio_gpu_object_create() has already set bo->created,
VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side
resource and the resource id.
drm_gem_handle_create_tail() drops the handle reference on all of its
internal error paths, so the caller only has to drop its own. Use
drm_gem_object_put(), matching the success path below. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Bound ownership depth through local kptrs and graph roots
Program-allocated objects can own other local objects through referenced
kptrs. bpf_obj_free_fields() follows those pointers through
__bpf_obj_drop_impl() synchronously, before the object storage is freed
through RCU. A self-referential local kptr type therefore permits arbitrarily
deep object chains, and dropping the head can exhaust the kernel stack.
Long acyclic type chains have the same problem.
btf_check_and_fixup_fields() still assumes referenced kptrs only point to
kernel types and checks ownership through list and rbtree roots only. Its
existing rule is sufficient for graph-only cycles: the target of each graph
edge must contain a node, so every type in a cycle has both a root and a
node. The rule rejects such a type owning another root, breaking every
cycle. It also limits graph-only chains to three types, or two if the first
type contains a node, and conservatively rejects longer acyclic chains.
The missing local-kptr edges, rather than a missed graph-only cycle, are the
bug introduced by support for bpf_kptr_xchg() into local kptrs.
Replace that restriction with one bounded ownership walk covering graph
roots and local referenced kptrs. Run it after all BTF records have been
fixed up, reject cycles and paths deeper than eight record-bearing types,
and cache each type's suffix depth while checking it against the remaining
budget. This also permits the longer acyclic graph-only layouts rejected
by the old rule; update their existing BTF tests accordingly.
Keep the bound independent of MAX_CALL_FRAMES because recursive destruction
can run below a BPF call chain. A plain local pointee without special-field
metadata adds only a final non-recursing drop. Non-owning kptrs and
kernel-BTF kptrs do not recurse through local records and remain outside the
walk. Include local percpu-kptr edges too, although allocation of percpu
objects with special fields is currently forbidden, so that relaxing that
restriction cannot bypass the ownership bound.
btf_check_and_fixup_fields() continues to initialize graph_root.value_rec,
including for separately allocated map records. The ownership relationships
belong to immutable program BTF and only need validation at BTF load time. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| An OS Command Injection vulnerability in the bootzd zero-touch provisioning daemon of Juniper Networks Junos OS Evolved allows an unauthenticated attacker on the management LAN to execute commands as root via crafted DHCP response. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileUplink handling of Fw::FilePacket::StartPacket destination paths FileUplink copies the packet-controlled destinationPath and opens it for writing without canonicalization or confinement to an upload directory. When a peer able to send file-uplink packets supplies an absolute, traversing, or otherwise attacker-selected writable destination path, files can be created or overwritten at attacker-selected writable filesystem locations, affecting integrity and potentially availability. This issue is fixed in version 4.3.0. |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. |
