| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Guard mana_remove against double invocation
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: revalidate bridge ports
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't need the bridge port structure.
Also, this fix keeps another bug intact:
Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER
too aggressive, which prevents certain logging features when queueing
in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old
CONFIG_BRIDGE_NETFILTER cruft is off.
Fixes tag is a common ancestor, this was always broken. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: admv1013: fix NULL pointer dereference on str
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dc_link NULL handling in HPD init
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw()
dcn401_init_hw() assumes that update_bw_bounding_box() is valid when
entering the update path. However, the existing condition:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
(cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
lockd, nfsd: RCU-protect nlmsvc_ops dispatch
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix BUG_ON in nfsd4_alloc_layout_stateid on racing delegation revoke
nfsd4_alloc_layout_stateid reads fp->fi_deleg_file without holding
fi_lock when the parent stateid is a delegation. A concurrent delegation
revoke via the laundromat can clear fi_deleg_file under fi_lock, causing
nfsd_file_get() to return NULL and triggering the BUG_ON.
This race is client-reachable: two NFS clients can trigger it by having
one hold a delegation while another opens the same file to force a
recall. When the first client doesn't respond to the recall, the
laundromat revokes it. A concurrent LAYOUTGET from any client using the
delegation stateid hits the race window.
Fix this by taking fi_lock around the fi_deleg_file read in the
SC_TYPE_DELEG path, matching the locking discipline of the
find_any_file() arm, and replacing the BUG_ON with a graceful error
return that cleans up the partially-initialized layout stateid. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv()
ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL
check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears
dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev
check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with
dev->ip6_ptr already NULL.
Reproduced by flooding the receiving interface with ping6 traffic while
flapping its MTU between 1500 and 1200:
BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070
Read of size 4 at addr 00000000000006b4 by task ping6/394
CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full)
Call Trace:
<IRQ>
kasan_report+0xc6/0x100
ipv6_rpl_srh_rcv+0xb3/0x1070
ip6_protocol_deliver_rcu+0x759/0x9a0
ip6_input_finish+0xa8/0x1b0
ip6_input+0xe1/0x490
ipv6_rcv+0x33d/0x460
__netif_receive_skb_one_core+0xd6/0x130
process_backlog+0x2cc/0xa00
__napi_poll.constprop.0+0x56/0x270
net_rx_action+0x327/0x730
handle_softirqs+0x11e/0x630
do_softirq+0xb3/0xf0
</IRQ>
Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from
ipv6_rthdr_rcv(), which already has an idev lookup.
Fix the NULL dereference on the RPL path by checking idev in
ipv6_rthdr_rcv(), before it calls either function. The callees take idev as
an argument and no longer call __in6_dev_get(), so the packet is now
dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
params: fix charp corruption on allocation failure
param_set_charp() stores charp parameters in allocated memory after slab is
available, and releases the previous value when the parameter is updated.
The previous value is released before the replacement allocation succeeds.
If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter
left as NULL.
Failing zswap's compressor update before zswap is initialized can later
trigger:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:strcmp+0x10/0x30
Call Trace:
zswap_setup+0x3b1/0x490
zswap_enabled_param_set+0x5b/0xa0
param_attr_store+0x93/0xe0
module_attr_store+0x1c/0x30
kernfs_fop_write_iter+0x116/0x1f0
Allocate and copy the replacement first, then replace the parameter value
only after allocation succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix gssx_dec_option_array error path bugs
Four coupled defects in the gssx XDR option-array decoder make the
error paths unsafe: a NULL deref in the caller, a refcount leak on
the decoded group_info, and a latent use-after-free that the leak
fix would otherwise expose.
gssx_dec_option_array() sets oa->count = 1 before allocating
oa->data. If that allocation fails, -ENOMEM is returned with
oa->count == 1 and oa->data == NULL. All other error paths jump
to free_oa: which frees oa->data and NULLs it but also leaves
oa->count == 1. The caller trusts the count:
gssp_accept_sec_context_upcall()
gssx_dec_accept_sec_context()
gssx_dec_option_array() /* fails, count=1 data=NULL */
data = res.options.data[0].value /* NULL deref */
Independently, free_creds: releases the partially decoded svc_cred
with a bare kfree(creds). gssx_dec_linux_creds() installs a
groups_alloc() result into creds->cr_group_info; that object is
kvmalloc-backed and refcounted, and only put_group_info() reaches
kvfree(). A plain kfree(creds) drops the wrapper and leaks the
group_info allocation.
The natural fix for the leak is to call free_svc_cred(creds) before
kfree(creds), but free_svc_cred() invokes put_group_info() on
creds->cr_group_info unconditionally when non-NULL. The existing
out_free_groups: path in gssx_dec_linux_creds() already called
groups_free() on that pointer without clearing it, so once
free_svc_cred() is wired in, the subsequent put_group_info() would
touch freed memory.
Fix all four together:
- Move the oa->count = 1 assignment below the oa->data allocation
so it is never set when oa->data is NULL.
- Reset oa->count to 0 at free_oa: so count and data stay
coherent and the caller sees an empty option array.
- Call free_svc_cred(creds) before kfree(creds) at free_creds:
so the refcounted cr_group_info is released. free_svc_cred()
either NULL-guards each field explicitly (cr_group_info has
an if() check) or delegates to a helper that is NULL-safe
itself (kfree for the string fields, gss_mech_put() which
guards with if(gm) at gss_mech_switch.c:342), so it is safe
to call on a partially decoded svc_cred where only
cr_uid/cr_gid/cr_group_info have been written and everything
else is zero from kzalloc.
- In gssx_dec_linux_creds()'s out_free_groups: path, release
cr_group_info with put_group_info() rather than groups_free()
so the teardown matches free_svc_cred()'s refcount-aware path,
and clear the pointer so a later free_svc_cred() on the same
creds does not release it a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Read lists that exceed the page budget
Individual Read segment lengths are validated at decode time, but
nothing prevents a requester from sending multiple segments whose
cumulative length exceeds the rq_pages array budget. When one
segment fills the page array exactly, the runtime guard in
svc_rdma_build_read_segment() is bypassed because len reaches zero.
A subsequent segment then accesses the NULL sentinel slot at
rq_pages[rq_maxpages], resulting in a NULL pointer dereference during
DMA mapping.
Accumulate pages across all Read segments and reject the message at
decode time when the total would overflow the page budget. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: fix NULL dereference on lockowner allocation failure
nlmclnt_locks_init_private() installs NLM file lock operations even when
nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc()
then returns -ENOMEM, but the VFS still tears down the partially
initialized file_lock and calls locks_release_private().
That invokes nlmclnt_locks_release_private(), which dereferences
fl->fl_u.nfs_fl.owner and crashes because the owner was never installed.
Clear fl_ops before attempting to initialize the NLM private state, and
install the NLM lock operations only after a lockowner has been allocated
successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Set handle->dev before the SVA handle is visible
iommu_attach_device_pasid() installs the new SVA attach handle in the
group PASID lookup before iommu_sva_bind_device() returns. A concurrent
bind can therefore find and reuse the same handle after iommu_sva_lock is
dropped.
handle->dev was initialized after dropping iommu_sva_lock. This leaves a
window where a racing bind can return a handle whose dev pointer is still
NULL. A subsequent iommu_sva_unbind_device() can then dereference it via
handle->dev->iommu_group.
Initialize handle->dev before releasing iommu_sva_lock so any visible SVA
handle is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Add a NULL check for sst_inst[]
To be consistent with other places, add a NULL check for failed socket
loading by checking isst_common.sst_inst[]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if dml21_add_phantom_plane() is successful
Verify that the phantom plane was allocated to avoid a later
segfault.
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) |
