| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Starlette is a lightweight ASGI framework/toolkit. Prior to version 1.0.1, the HTTP `Host` request header was not validated before being used to reconstruct `request.url`. Because the routing algorithm relies on the raw HTTP path while `request.url` is rebuilt from the `Host` header, a malformed header could make `request.url.path` differ from the path that was actually requested. Middleware and endpoints that apply security restrictions based on `request.url` (rather than the raw `scope` path) could therefore be bypassed. Users should upgrade to a version greater than or equal to version 1.0.1, which validates the `Host` header against the grammar of RFC 9112 §3.2 / RFC 3986 §3.2.2 when constructing `request.url` and falls back to `scope["server"]` for malformed values. |
| Apache Traffic Server truncates over-long header names, allowing header aliasing, request smuggling, and policy bypass.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| Apache Traffic Server does not reject Transfer-Encoding in HTTP/2 requests, allowing downgrade request smuggling.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| Apache Traffic Server allows request smuggling if chunked messages are malformed.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| A flaw was found in openshift/console. An unauthenticated remote attacker can exploit a misconfiguration in the CatalogdHandler, which lacks proper authentication, and the forwarding of the `openshift-session-token` cookie. This allows the attacker to send requests to the in-cluster catalogd service, leading to the disclosure of the internal operator-catalog index and providing a relay into the openshift-catalogd namespace. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.15.2 until 1.20.0, the Node HTTP adapter in lib/adapters/http.js supplies request options without an own createConnection value. A separate same-process prototype-pollution flaw places a function on Object.prototype.createConnection. Node resolves and invokes the inherited createConnection socket factory, allowing the attacker-controlled function to select the transport endpoint. The attacker endpoint can receive request headers and bodies, including credentials, and return attacker-controlled responses while the URL appears legitimate. This issue is fixed in version 1.20.0. |
| A flaw was found in SoupServer (libsoup). When an HTTP/1.x client sends a request with Expect: 100-continue and a request body, and SoupServer returns an early final (non-1xx) response before the body is read, the server neither drains the declared body bytes nor closes the connection. On a keep-alive connection, those leftover bytes are interpreted as a subsequent HTTP request. A remote, unauthenticated attacker can place a complete HTTP request in the body and cause SoupServer to process that smuggled request, leading to unintended request handling. |
| IBM WebSphere Application Server 8.5, 9.0, and Liberty are vulnerable to HTTP request smuggling. |
| http4k (Maven package org.http4k:http4k-core) before 6.49.0.0, 5.42.0.0 and 4.51.0.0 uses substring (Contains) matching on the Host header by default in reverseProxy() and reverseProxyRouting() when dispatching to configured virtual hosts. If these functions are deployed as a public-facing inbound HTTP handler with two or more configured virtual hosts, a remote attacker can supply a Host header that merely contains a configured vhost name (for example Host: admin.evil.com for a vhost configured as "admin") and be routed to that vhost, bypassing routing-based authorization. The intended outbound-dispatch and test-time uses, where the Host value is set by the calling application, are not affected. |
| Netty's HttpServerCodec (io.netty:netty-codec-http) in versions 4.2.0.Final through 4.2.16.Final and in versions up to and including 4.1.136.Final pairs each outbound response with an inbound request by calling pollMethod() once per response, including for 1xx informational responses. If a client pipelines an HTTP/1.1 GET carrying an Expect: 100-continue header followed by a HEAD request, the 100 Continue response consumes the queued GET method, so the subsequent 200 OK for the GET is paired with HEAD and its body is dropped, while the following 200 OK for the HEAD request is written with a body. This desynchronizes HTTP parsing on the connection: the GET entity is never delivered and the HEAD response body is interpreted as the GET body, resulting in response splitting and unsafe connection reuse. Fixed in 4.2.17.Final and 4.1.137.Final. |
| Confused deputy in Mobile in Google Chrome on on Android prior to 154.0.8037.57 allowed a local attacker leveraging social engineering to obtain sensitive information via a co-installed app. (Chromium security severity: Low) |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize an intermediary and the Mint client on a pooled connection, poisoning the responses to subsequent requests that share the connection.
message_body/1 in lib/mint/http1.ex selects chunked framing when chunked is the first coding listed in a response's Transfer-Encoding fields. RFC 9112 section 6.3 applies chunked framing only when chunked is the final coding, and otherwise reads the body until the server closes the connection. For a response such as Transfer-Encoding: chunked, gzip, an intermediary that follows the RFC treats every byte up to the close as the body, while Mint ends the body at the zero-length chunk and parses the remaining bytes as the response to the next request on the connection.
Mint also keeps the connection open after an HTTP/1.0 response, final or 1xx, that carries Transfer-Encoding and Connection: keep-alive. RFC 9112 section 6.1 requires treating the framing of such a message as faulty and closing the connection after it, so bytes after its chunked body are parsed as the response to the next request in the same way.
This issue affects mint: from 0.1.0 before 1.10.2. |
| Capgo (capgo.app) exposes a native build TUS upload proxy (supabase/functions/_backend/public/build/upload.ts) that authorizes a caller against a single build job identified by the supplied builder_job_id and validates only that job's stored upload_path, but then forwards the user-controlled TUS resource suffix taken from /build/upload/:jobId/* to the builder service while injecting Capgo's privileged builder API key. Because the forwarded suffix is never bound to the authorized job's upload_path or upload_session_key, a caller holding a valid 'all' or 'write' Capgo API key with app.build_native permission for one application can use its authorized proxy path for job A to write to the TUS upload resource of another job B, provided that resource suffix is known or exposed, corrupting that build's artifacts. All versions are affected; no patch was available at the time of advisory publication. |
| Inconsistent interpretation of HTTP requests ('HTTP Request/Response smuggling') vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1-37.279 and NDcPP; Gateway: before 14.1-73.37 FIPS and before 13.1-64.23. |
| Mongoose is an embedded web server and network library. Priro to version 7.22, a remote unauthenticated attacker can send an HTTP request containing both Content-Length and Transfer-Encoding: chunked. The cl_count and te_count checks in the mg_http_parse() and http_cb() paths in src/http.c accept both headers and prioritize chunked encoding, while a Content-Length-preferring reverse proxy can use a different request boundary. This CL.TE desynchronization can inject requests that access or modify resources in another user context. This issue is fixed in version 7.22. |
| Mongoose is an embedded web server and network library. Prior to 7.22, a remote unauthenticated attacker can exploit an HTTP/1.0 reverse-proxy deployment by sending a request with Transfer-Encoding: chunked and conflicting framing. The http_cb() function in src/http.c tests hm.proto.len with an impossible greater-than-eight condition even though mg_http_parse() requires an eight-byte protocol string, so is_http_1_0 is never set. Mongoose consequently processes chunked encoding that an HTTP/1.0 proxy can ignore, enabling request smuggling and unauthorized access or state changes. This issue is fixed in version 7.22. |
| MCP Atlassian is a Model Context Protocol (MCP) server for Atlassian products (Confluence and Jira). Prior to 0.22.0, the Jira update_issue attachments argument is converted into local paths and routed to the attachment upload implementation without workspace validation. A caller can make the MCP server read arbitrary local files and attach them to a Jira issue, using the server as a confused deputy to exfiltrate the contents. The advisory traces the vulnerable input and processing flow through jira update_issue, attachments, upload_attachment, and file_path, which identify the affected entry points, controls, and code paths. This issue is fixed in version 0.22.0. |
| The Breeze Cache WordPress plugin before 2.5.15 does not include a set of tracking-related query parameters in its page-cache key while still caching pages requested with them, allowing unauthenticated attackers to have a page rendered under their own request context stored under, and served from, the clean URL's cache entry to every subsequent visitor. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.17.0 until 1.20.0, the fetch adapter bypasses the maxRedirects: 0 redirect policy. An Axios request uses the fetch adapter with maxRedirects set to zero and receives a redirect response. The underlying fetch implementation follows the redirect instead of returning the redirect response unchanged. The redirected request can access internal responses or reach state-changing internal endpoints despite redirects being disabled. This issue is fixed in version 1.20.0. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final. |
