| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Authentication Endpoint accepts user-supplied input without sufficient encoding, allowing for the injection of malicious JavaScript payloads. This vulnerability can be triggered by submitting crafted input to the Authentication Endpoint.
Successful exploitation allows an attacker to redirect the user's browser to a malicious website, modify the web page's user interface, or extract sensitive information from the browser. However, due to the `httpOnly` flag on session-related cookies, session hijacking is not possible. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: clear delay state when freeing policy data
io.latency can throttle a group which has no latency target of its own.
When a sibling misses its target, check_scale_change() scales down its
peers, and a peer that reaches queue depth one gets blkcg_use_delay()
called on it on every further scale-down, even with min_lat_nsec == 0.
iolatency_pd_offline() resets the target through
iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero
to zero transition, so it never clears such a peer. Freeing the policy
data then leaves blkg->use_delay set and blkcg->congestion_count
elevated with nothing left that can drop it.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants for as long as the cgroup lives: page_cache_sync_ra()
cuts readahead to a single page, page_cache_async_ra() skips it
altogether, and __folio_throttle_swaprate() takes swap_avail_lock and
schedules a throttle on anonymous folio allocation.
Clear the delay in iolatency_pd_free(). By then bio-held blkg
references have drained, or the queue is frozen for policy
deactivation, so check_scale_change() cannot re-arm it. The free
callback can also see policy data which was never attached to a blkg,
hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.1: zero referring call lists before decoding
decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so
each referring_call_list starts uninitialized. decode_rc_list() assigns
rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero
referring calls therefore leaves the pointer uninitialized, and
nfs4_callback_sequence() later passes stale slab contents to kfree().
Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is
NULL from the beginning, including valid empty referring call lists. |
| The Translate WordPress with Weglot 2.0 WordPress plugin before 6.4.3 does not escape the URLs it re-inserts into a page when rewriting links for a translated language, and reverses the encoding that was applied to them beforehand, allowing unauthenticated users to store a payload which executes in the browser of anyone viewing the page in a translated language. |
| The Jane Menu WordPress plugin before 1.5.1 does not have any capability or nonce checks on one of its form handlers, which is reachable by unauthenticated users, allowing them to bind any published page to a remote document of their choosing. The plugin then fetches that document and outputs its head and body into the page without escaping, so an unauthenticated attacker can run arbitrary JavaScript in the browser of any visitor to that page, including an administrator. |
| The Elementor Website Builder WordPress plugin before 4.3.5 does not sanitize the text content of SVG files, checking only their elements and attributes, allowing users with the Contributor role and above to store a payload which breaks out when the SVG is rendered inline in a page and executes in the browser of any user viewing it. Execution is specific to Chromium-based browsers; Firefox is not affected. |
| The Elementor Website Builder WordPress plugin before 4.3.5 does not sanitize uploaded SVG files on every upload route, allowing users with the Author role and above to upload a file containing JavaScript, which will run in the browser of any user who opens it. Exploitation requires unfiltered file uploads to be enabled in the Elementor Website Builder WordPress plugin before 4.3.5 settings, which is not the default. |
| The Advanced File Manager WordPress plugin before 6.0.0 does not correctly determine whether a stored file is an SVG before sanitising it, allowing users granted file-manager access by an administrator to store a file containing script that is not stripped and that runs in the browser of anyone who opens it, including an administrator. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force SureCart surecart allows Stored XSS.This issue affects SureCart: from n/a through 4.9.5. |
| The User Profile Builder WordPress plugin before 4.0.1 does not escape the current page URL before outputting it in a JavaScript context on one of its admin pages, leading to Reflected Cross-Site Scripting against high-privilege users. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CozyThemes Rootblox rootblox allows Stored XSS.This issue affects Rootblox: from n/a through 1.0.7. |
| The Redirection for Contact Form 7 WordPress plugin before 3.2.12 does not sanitise or escape submitted form data stored as lead entries before outputting it in the lead debug metabox, allowing unauthenticated attackers to store a malicious script that executes when a logged-in user views the entry with the Redirection for Contact Form 7 WordPress plugin before 3.2.12's debug mode enabled. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Kevin Stover Ninja Forms ninja-forms allows Stored XSS.This issue affects Ninja Forms: from n/a through 3.15.5. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in geekontheroad Live Summary for Gravity Forms live-summary-for-gravity-forms allows Reflected XSS.This issue affects Live Summary for Gravity Forms: from n/a through 1.2.10. |
| The WP Booking System WordPress plugin before 2.1.0.3 does not validate and escape one of its parameters before reflecting it back in an admin page, leading to Reflected Cross-Site Scripting which could be used against high privilege users such as administrators. |
| The HireZoot WordPress plugin before 4.1.1 does not sanitise and escape some of its stored data before outputting it in the admin dashboard, and additionally reverses the HTML-entity encoding that would otherwise neutralise it, allowing users with the Author role to perform Stored Cross-Site Scripting attacks that execute in the context of a logged-in administrator. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Chill Strong Testimonials strong-testimonials allows Stored XSS.This issue affects Strong Testimonials: from n/a through 3.3.12. |
| The Brizy – Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'brizy-compiled-sections' parameter in all versions up to, and including, 2.8.18 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Backdrop CMS Core 1.35.x before 1.35.2 and 1.34.x before 1.34.6 does not sufficiently validate uploaded SVG images to ensure they lack potentially dangerous SVG tags. SVG images can contain clickable links or executable scripting. By uploading a crafted SVG, it is possible to execute scripting in the browser when an SVG image is viewed. This issue is mitigated by the attacker needing to be able to upload SVG images, and that Backdrop embeds all uploaded SVG images within <img> tags, which prevents script from executing. The SVG must be viewed directly by its URL in order to run any embedded scripting. |
| Jooan JA-A12 IP cameras with firmware 009_20171107 and 05.02.31.105 contain a remote code execution vulnerability that allows unauthenticated attackers to run root commands via hard-coded credentials. Attackers send singleCMD=SetDiagMode to /goform/SingleHandlebyCommand with an attacker-chosen authserverip and authcode, making the jooandiag daemon execute their commands through /bin/sh, giving full device control. |
