| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs, afs: Fix write skipping in dir/link writepages
Fix netfs_write_single() and afs_single_writepages() to better handle a
write that would be skipped due to lock contention and WB_SYNC_NONE by
returning 1 from netfs_write_single() if it skipped and making
afs_single_writepages() skip also. If a skip occurs, the inode must be
re-marked as the VFS may have cleared the mark.
This is really only theoretical for directories in netfs_write_single() as
the only path to that is through afs_single_writepages() that takes the
->validate_lock around it, thereby serialising it. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use list_del_rcu in l2tp_session_unhash
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: fix NULL pointer dereference in phy_reply_size
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Call Trace:
mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
devlink_health_reporter_recover+0xa2/0x150
devlink_health_report+0x254/0x7c0
mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core]
mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core]
process_one_work+0x677/0xf20
worker_thread+0x51f/0xd90
kthread+0x3a5/0x810
ret_from_fork+0x208/0x400
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: refresh hdr pointer before ioam6_event()
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and
passes it to i2c_smbus_read_block_data() to retrieve the 4-byte
BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour
caller buffer sizes -- it memcpy()s data.block[0] bytes from the
SMBus transaction (where data.block[0] is the length byte returned by
the slave device, up to I2C_SMBUS_BLOCK_MAX = 32):
memcpy(values, &data.block[1], data.block[0]);
If the device returns any block length above 5, the call overflows
the caller's 5-byte stack buffer before the post-call
if (ret != 4)
return -EIO;
check has a chance to reject the response.
Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room
for any well-formed SMBus block response, matching the convention used
by the other i2c_smbus_read_block_data() callers in this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require net admin for CIFS SWN netlink
CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The
intended sender is the cifs.witness helper, but the generic-netlink
operation currently has no capability flag, so any local process can send
RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness
handler.
The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group
capability flags. Register messages sent to that group include the witness
registration id and, for NTLM-authenticated mounts, the username, domain,
and password attributes copied from the CIFS session. An unprivileged
local process should not be able to join that group and receive those
messages.
Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with
GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for
joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The
cifs.witness service runs with the privileges needed for both operations. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Pin source page for write when adding CPUID data for SNP guest
When populating a guest_memfd instance with the initial CPUID data for an
SNP guest, acquire a writable pin on the source page as KVM will write back
the "correct" CPUID information if the userspace provided data is rejected
by trusted firmware. Because KVM writes to the source page using a kernel
mapping, pinning for read could result in KVM clobbering read-only memory.
Note, well-behaved VMMs are unlikely to be affected, as CPUID information
is almost always dynamically generated by userspace, i.e. it's unlikely for
the CPUID information to be backed by a read-only mapping.
[sean: rewrite shortlog and changelog, tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix io_thread race in rxrpc_wake_up_io_thread()
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does. |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up. |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 IBM Aspera for desktop can allow files to be written outside of the user's selected download destination. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers
smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn
into a local with neither READ_ONCE() nor a NULL check. Both run from
oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a
concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL
under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then
writes through NULL at offset 0xc4 -- a remotely triggerable oops.
Guard both reads the way compare_guid_key() already does: read
opinfo->conn with READ_ONCE() and return early if it is NULL, before
allocating the work struct so nothing leaks. A NULL conn means the
client is gone and the break is moot, so return 0; oplock_break() treats
that as success and runs the normal teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error()
dereferences p->comm and p->pid. If the iterator's reference is the last
drop, the task is freed synchronously and the deref becomes a UAF.
Move put_task_struct() past scx_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Disable broadcast TLB flush when PCID is disabled
Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being
set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains
enabled.
There are two checks that decide whether the global ASID code runs,
mm_global_asid() and consider_global_asid(), that key off of the
X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three
CPUs, consider_global_asid() assigns it a global ASID, after which
flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero
PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set
results in a #GP:
Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI
CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full)
Hardware name: ...
RIP: 0010:broadcast_tlb_flush
Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ...
Call Trace:
<TASK>
flush_tlb_mm_range
ptep_clear_flush
wp_page_copy
? _raw_spin_unlock
__handle_mm_fault
handle_mm_fault
do_user_addr_fault
exc_page_fault
asm_exc_page_fault
All processors that support broadcast TLB invalidation also have PCID support,
so it is only the "nopcid" scenario that is of concern. In this situation just
disable the broadcast TLB support using the CPUID dependency support by making
X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID.
[ bp: Massage commit message. ] |
