| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers. |
| In Eclipse hawkBit versions 1.0.3 and prior, a privilege escalation vulnerability (CWE-284 / CWE-862) has been identified in the Direct Device Integration (DDI) Controller.
This vulnerability allows an authenticated device to escalate its permissions and bypass the strict boundaries of its assigned updates. Under normal operation, a device should be restricted strictly to the specific firmware artifacts explicitly assigned to it. However, this flaw enables any authenticated device to bypass this restriction and download any firmware artifact within the same tenant.
This is not an authentication bypass; the requesting device must possess valid credentials for its respective tenant. Instead, the issue stems from a flaw in object-level authorization validation.
A related, lower-severity helper issue exists in the listing software modules artifacts metadata endpoint. This endpoint does not enforce assignment checks, enabling an authenticated device to list and enumerate available firmware artifacts, which can facilitate targeted exfiltration using the main download authorization bypass. |
| Heap type confusion and out-of-bounds read/write in the Apache Fory C++ implementation. When deserializing data in compatible mode, the field-skip paths do not correctly validate the declared field types against the actual data, so input with an inconsistent schema can cause type confusion and out-of-bounds memory access. Only the C++ implementation is affected; other language implementations of Apache Fory are not.
This issue affects Apache Fory C++: from 0.14.0 before 1.4.0.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
| An argument injection vulnerability in PrefectHQ Prefect through 3.8.2 allows authenticated users to achieve remote code execution via the git_clone pull step branch field. The branch parameter is passed directly to git pull without sanitization, enabling injection of arbitrary git arguments. This represents a distinct code path from the incomplete fix applied for CVE-2026-5366 and allows command execution on the Prefect server. |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the borrowers => edit_borrowers permission to cause a time-based denial of service by storing a SQL payload in a patron lang field. The value is concatenated raw into a subquery in Koha::AdditionalContents->search_for_display when an issue slip is printed for the affected patron. The 25-character column length limits exploitation to timing attacks; data extraction is not practical. The stored payload executes on each subsequent issue-slip print, scaling linearly with the SLEEP value and the number of slip-news rows. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: fix report_work leak on backbone_gw purge
batadv_bla_purge_backbone_gw() removes stale backbone gateway entries,
but fails to properly handle their associated report_work:
- If report_work is running, the purge must wait for it to finish before
freeing the backbone_gw, otherwise the worker may access freed memory
(e.g. bat_priv).
- If report_work is pending, the purge must cancel it and release the
reference held for that pending work item.
The previous implementation called hlist_for_each_entry_safe() inside a
spin_lock_bh() section, but cancel_work_sync() may sleep and therefore
cannot be called from within a spinlock-protected region.
Restructure the loop to handle one entry per spinlock critical section:
acquire the lock, find the next entry to purge, remove it from the hash
list, then release the lock before calling cancel_work_sync() and
dropping the hash_entry reference. Repeat until no more entries require
purging. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ti-qspi: fix use-after-free after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to clear the DMA channel pointer also if buffer allocation
fails to avoid passing a pointer to the released channel to the DMA
engine (or trying to free the channel a second time on late probe errors
or driver unbind).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.112.0 and 16.22.0, the merge_account, pause_job_for_doc, trigger_job_for_doc, change_release_date, and update_cost_center functions across erpnext/accounts/doctype/account/account.py, erpnext/accounts/doctype/process_payment_reconciliation/process_payment_reconciliation.py, erpnext/accounts/doctype/purchase_invoice/purchase_invoice.py, and erpnext/accounts/utils.py omit required write permission checks, allowing authenticated limited users to modify protected data beyond their roles. This issue is fixed in versions 15.112.0 and 16.22.0. |
| ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.111.0 and 16.22.0, the send_auto_email function in erpnext/accounts/doctype/process_statement_of_accounts/process_statement_of_accounts.py lacks a Process Statement Of Accounts permission check, allowing an authenticated low-privilege user to trigger automated emails outside the permitted role. This issue is fixed in versions 15.111.0 and 16.22.0. |
| Craft CMS 5.0.0-RC1 through 5.10.5 contains an incorrect authorization vulnerability. A control-panel user holding only the viewCategories permission (without saveCategories) for a category group can permanently modify that group's category structure — reordering and re-parenting categories — via the structures/move-element action. The structureEditable flag is computed from the view permission rather than the save permission, and the StructuresController authorizes the mutating action on that read-time session grant without a save re-check. Because a category's URI is derived from its position in the structure, moving a category changes its URL and those of its descendants and can corrupt navigation menus built from the category taxonomy. The issue is fixed in 5.10.6. |
| Cachet through 2.4.1 contains a server-side template injection vulnerability in incident template rendering that allows authenticated users to execute arbitrary PHP code. Attackers can create malicious incident templates with Blade directives or Twig filters that execute system commands when incidents are created, achieving remote code execution as the web server process. |
| An SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the acquisition => order_receive permission to read arbitrary database contents via the orderby request parameter in acqui/parcels.pl. The parameter is passed to C4::Acquisition::GetInvoices, which allow-lists the column name but concatenates the direction token raw into the SQL ORDER BY clause without validation. Exploitation is blind (time-based) in production and allows extraction of patron PII, staff bcrypt password hashes, and two-factor secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| An SQL injection vulnerability in Friendica through the 2026.08-dev branch allows unauthenticated remote attackers to execute arbitrary SQL statements via the photo-view order parameter. The parameter is concatenated unescaped into a SHOW COLUMNS query via a bare PDO::query() call, enabling stacked statement injection. An unauthenticated attacker can read, modify, or delete the entire database. |
| An SQL injection vulnerability in CiviCRM through 6.18.alpha1 allows authenticated staff to read the entire database via the contact search RLIKE clause. The clause concatenates a user-supplied value into the SQL query without sanitization. An attacker with staff-level access can exfiltrate all database contents including donor and member records. |
| An SQL injection vulnerability in e107 2.4.0 allows unauthenticated remote attackers to execute arbitrary SQL via the news item page ID parameter. The parameter is concatenated without escaping into a SQL WHERE clause. An unauthenticated attacker can read, modify, or delete all database contents including administrator credentials. |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the tools => items_batchmod permission to read arbitrary database contents by storing a SQL payload in the agefield value of an automatic item modification rule. The agefield value is stored verbatim to the system preference and later interpolated without parameterization into a SQL query in C4::Items::ToggleNewStatus (line 1228) when the scheduled cron job executes. The injection is SELECT-only under standard MariaDB/MySQL DBI single-statement execution; a time-based SLEEP payload is also achievable via the cron trigger. An attacker can read the entire Koha database including patron PII and staff bcrypt password hashes. |
| A stored SQL injection vulnerability in Koha through 24.11.17, 25.05.12, 25.11.06, and 26.05.01 allows authenticated staff with the tools => label_creator permission to execute arbitrary SQL via the image_name field of a patron card layout. The image_name value is stored verbatim in the layout XML and later concatenated raw into a SQL query in patroncards/create-pdf.pl when a patron card batch is printed. An attacker can read the entire Koha database including patron PII and staff bcrypt password hashes via error-based or time-based blind injection. |
| Vault’s ACL policy engine did not consistently enforce a wildcard (glob) deny rule against LIST requests made with a trailing slash on the denied path. This may allow a token holding a broader allow rule alongside a narrower wildcard deny rule to enumerate the names of entries beneath a path it was intended to be denied access to. This vulnerability (CVE-2026-12624) is fixed in Vault Community Edition 2.0.3 and Vault Enterprise 2.0.3, 1.21.8, 1.20.13, and 1.19.19. |
