| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ory Kratos is an identity, user management and authentication system for cloud services. Prior to version 1.3.0, given a number of preconditions, the `highest_available` setting will incorrectly assume that the identity’s highest available AAL is `aal1` even though it really is `aal2`. This means that the `highest_available` configuration will act as if the user has only one factor set up, for that particular user. This means that they can call the settings and whoami endpoint without a `aal2` session, even though that should be disallowed. An attacker would need to steal or guess a valid login OTP of a user who has only OTP for login enabled and who has an incorrect `available_aal` value stored, to exploit this vulnerability. All other aspects of the session (e.g. the session’s aal) are not impacted by this issue. On the Ory Network, only 0.00066% of registered users were affected by this issue, and most of those users appeared to be test users. Their respective AAL values have since been updated and they are no longer vulnerable to this attack. Version 1.3.0 is not affected by this issue. As a workaround, those who require MFA should disable the passwordless code login method. If that is not possible, check the sessions `aal` to identify if the user has `aal1` or `aal2`. |
| Bareos is open source software for backup, archiving, and recovery of data for operating systems. When a command ACL is in place and a user executes a command in bconsole using an abbreviation (i.e. "w" for "whoami") the ACL check did not apply to the full form (i.e. "whoami") but to the abbreviated form (i.e. "w"). If the command ACL is configured with negative ACL that should forbid using the "whoami" command, you could still use "w" or "who" as a command successfully. Fixes for the problem are shipped in Bareos versions 23.0.4, 22.1.6 and 21.1.11. If only positive command ACLs are used without any negation, the problem does not occur. |
| Voltronic Power ViewPower through 1.04-21353 and PowerShield Netguard before 1.04-23292 allows a remote attacker to configure the system via an unspecified web interface. An unauthenticated remote attacker can make changes to the system including: changing the web interface admin password, view/change system configuration, enumerate connected UPS devices and shut down connected UPS devices. This extends to being able to configure operating system commands that should run if the system detects a connected UPS shutting down. |
| An authentication bypass vulnerability could allow an attacker to access API functions without authentication. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| A vulnerability was identified in h-moses moga-mall up to 392d631a5ef15962a9bddeeb9f1269b9085473fa. This vulnerability affects the function addProduct of the file src/main/java/com/ms/product/controller/PmsProductController.java. Such manipulation of the argument objectName leads to unrestricted upload. The attack may be performed from remote. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| A flaw was found in the Keycloak Admin REST API. This vulnerability allows the exposure of backend schema and rules, potentially leading to targeted attacks or privilege escalation via improper access control. |
| Improper access control for some Intel(R) Thunderbolt driver software before version 89 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper verification of a user input in Open Source MANO v7-v12 allows an authenticated attacker to execute arbitrary code within the LCM module container via a Virtual Network Function (VNF) descriptor. An attacker may be able execute code to change the normal execution of the OSM components, retrieve confidential information, or gain access other parts of a Telco Operator infrastructure other than OSM itself. |
| An improper authorization flaw exists in the Ansible Automation Controller. This flaw allows an attacker using the k8S API server to send an HTTP request with a service account token mounted via `automountServiceAccountToken: true`, resulting in privilege escalation to a service account. |
| IPP software prior to v1.71 is vulnerable to default credential vulnerability. This could
lead attackers to identify and access vulnerable systems. |
| The Versa Director SD-WAN orchestration platform which makes use of Cisco NCS application service. Active and Standby Directors communicate over TCP ports 4566 and 4570 to exchange High Availability (HA) information using a shared password. Affected versions of Versa Director bound to these ports on all interfaces. An attacker that can access the Versa Director could access the NCS service on port 4566 and exploit it to perform unauthorized administrative actions and perform remote code execution. Customers are recommended to follow the hardening guide.
Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers. |
| Improper Authentication vulnerability in TYPO3 Extension "Modules" codingms/modules.This issue affects Extension "Modules": before 4.3.11, from 5.0.0 before 5.7.4, from 6.0.0 before 6.4.2, from 7.0.0 before 7.5.5. |
| A vulnerability was identified in newbee-mall-plus up to 2.4.1. This vulnerability affects the function executeSeckill of the file /seckillExecution/. The manipulation of the argument userid leads to authorization bypass. It is possible to initiate the attack remotely. The attack is considered to have high complexity. It is stated that the exploitability is difficult. The exploit is publicly available and might be used. |
| A host header injection vulnerability in scheduleR v0.0.18 allows attackers to obtain the password reset token via user interaction with a crafted password reset link. This allows attackers to arbitrarily reset other users' passwords and compromise their accounts. |
| An incorrect authentication vulnerability has been found in Socomec Net Vision affecting version 7.20. This vulnerability allows an attacker to perform a brute force attack on the application and recover a valid session, because the application uses a five-digit integer value. |
| Incorrect Access Control in Cfx.re FXServer v9601 and earlier allows unauthenticated users to modify and read arbitrary user data via exposed API endpoint |
| PIX-LINK LV-WR22 RE3002-P1-01_V117.0 is vulnerable to Improper Access Control. The TELNET service is enabled with weak credentials for a root-level account, without the possibility of changing them. |
